Abstract:Mechanical behaviors of a Ni-based single crystal superalloy have been investigated by tensile testing at various temperatures. Deformation substructures and mechanisms have been systemically revealed from micrometer to atomic scales by using advanced scanning electron and scanning transmission electron microscopes. Results show that deformation mode of the alloy strongly depends on the temperature due to competitive responses of the gamma and gamma' phases under mechanical loading and their original stress statuses. At temperatures from ambient to 750 degrees C, plasticity is governed by dislocation shearing in both phases, where slip modes of gamma are < 110 >{111} and those of gamma' are < 112 >{111}, < 110 >{111} and < 110 > {001}. At moderate temperatures (850 degrees C <= T <= 900 degrees C), plasticity mainly involves microscopically uniform deformation of both phases. The matrix deforms first so that channels parallel to tensile direction are narrowed due to the Poisson's effect, after that deformation of gamma' follows. The active slip modes are < 110 > {111} for gamma, < 112 >{111}, < 110 >{111}, < 110 >{001}, and < 001 >{001} for gamma'. At temperature higher than 1000 degrees C, plastic strain is also derived from deformation of both phases, but deformation of the matrix plays critical roles, due to relatively weak strength of this phase. The operative slip modes are < 110 > {111} for gamma, but mainly < 110 >{001} and < 001 >{001} for gamma'. Our results clearly provide a comprehensive and multiscale (from micrometer to atomic) understanding on the deformation mechanism of Ni-based superalloys, which can be critically beneficial and offer mechanistic guidelines to design new/next generation superalloys. (c) 2021 Elsevier Ltd. All rights reserved.

Modeling of Anisotropic Tensile and Cyclic Viscoplastic Behavior of a Nickel-Base Directionally Solidified Superalloy

Isothermal tensile, cyclic behaviour and constitutive modelling of nickel-based directionally solidified superalloy

Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQ

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

Constitutive modeling and failure mechanisms of anisotropic tensile and creep behaviors of nickel-base directionally solidified superalloy

Thermo-Mechanical Fatigue Constitutive Model for Nickel-Based Single Crystal Superalloys

Atomic Simulation of the Effect of Orientation on Tensile/compressive Properties in Nickel-Based Single Crystal Superalloys

High temperature cyclic deformation characteristics and constitutive modeling for alloy DZ125

Constitutive Modeling of a Directionally Solidified Nickel-Based Superalloy DZ125 Subjected to Thermal Mechanical Creep Fatigue Loadings

A Crystallographic Model for the Orientation Dependence of Low Cyclic Fatigue Property of a Nickel-Base Single Crystal Superalloy

The Tension/compression Asymmetry of a High Γ′ Volume Fraction Nickel-based Single-Crystal Superalloy

Effect Of Heterogeneous Dual-Phase Microstructure On Tensile Response Of Nickel-Base Superalloy

A Crystal Plasticity Based Constitutive Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

Cyclic Viscoplastic Deformation Modeling of a Nickel-Based Single Crystal Superalloy with [001] Orientation

Viscoplastic Constitutive Model for Ni-based Directionally Solidified Superalloy: Experimental Validation on Notched Specimen

MICROSTRUCTURE EVOLUTION MECHANISM BASED CRYSTAL-PLASTICITY CONSTITUTIVE MODEL FOR NICKEL-BASED SUPERALLOY AND ITS FINITE ELEMENT SIMULATION

A Dislocation Density-Based Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

Anisotropic Cyclic Plasticity Modeling for Additively Manufactured Nickel‐based Superalloys

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

A Numerical Implementation of a 3D Crystal Plasticity Model for Directionally Solidified Ni-Based Superalloy

Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy