A New Method of Variable Forming Point Grinding Revolving Parts with Convex Function Generatrix

Wang Shaolei,Lin Bin,Wang Yan,Cao Xiaoyan

DOI: https://doi.org/10.4028/www.scientific.net/msf.770.141

2013-01-01

Materials Science Forum

Abstract:This paper, presents an improved method for Face grinding with variable forming point, which aims at cup wheel face grinding convex function generatrix revolving parts.

What problem does this paper attempt to address?

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Shao-lei Wang,Bin Lin,Xiao-feng Zhang,Jian-ming Liang,Yan Wang

DOI: https://doi.org/10.1007/s00170-014-6668-8

IF: 3.563

2014-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:This paper introduces a discovery about the geometric property of the tangent vectors of a constant scallop height (CSH) curve. Based on this discovery, a new tool path generation algorithm for plane envelope grinding a convex surface is presented, which aims at grinding convex surface with a cup wheel on five-axis NC machine tool. First, the envelop surface generated by a family of tangent planes of the convex surface is researched. Based on the research result, a method for computing the characteristic lines of the envelope surface is proposed, and then, an algorithm for searching the points of a CSH curve is presented. Second, the geometric properties of a CSH curve are researched, and an important discovery that the tangent vectors of a CSH curve are perpendicular to its corresponding normal vectors of the convex surface is made, which gives a method for precisely calculating the tangent vectors. Finally, on the basis of the research above, especially the tangent vectors of a CSH curve, a tool path generation algorithm is constructed. This algorithm can avoid computing the closed form expression of envelope surface and derive the largest width of grinding row with maintaining a CSH.
Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Wu, Yijie,Leng, Hongbin,Pan, Xiaohong,Chen, Junhua

DOI: https://doi.org/10.1049/cp:20061025

2006-01-01

Abstract:Though analyzing the structure characteristics of arbitrary n-polygon non-circular sections, the mathematical formulas among the characteristic parameters were set up, and the theorem for designing this kind of sections was deduced by mathematical induction method. Based on mechanistic transmission principle, the control theorem for the numerical control (NC) grinding of arbitrary n-polygon non-circular sections and the control model for the multi-coordinate motion were built. The real-time interpolation algorithm was presented based on central angle division, and the method of acceleration-deceleration according to the curvature of surface was given. The dynamic model of the AC position servo system of grinding n-polygon non-circular sections is set up by experiment identification, and its parameter adjustment method is also studied. Then a feedforward control strategy is analyzed systematically, the tracking performance and contour error of the feedforward tracking controller for grinding n-polygon non-circular sections were deeply studied on the view of qualitative and quantitative analysis, the results show that the feedforward tracking control method is good in contour tracking and precision. Then a NC machine tool for grinding n-polygon non-circular sections was developed. The test results of the grinded parts showed that the section profiles accorded to the design demands; the roughness was less than 0.32 μm and the dimensional accuracy was within 8 μm. The results prove that the proposed theorems and method can effectively direct the design and manufacture of the polygonal non-circular connection.
Error Compensation in One-Point Inclined-Axis Nanogrinding Mode for Small Aspheric Mould

Shaohui Yin,Fengjun Chen,Yu Wang,Yufeng Fan,Yongjian Zhu,Hitoshi Ohmori,Kazutoshi Katahira

DOI: https://doi.org/10.4028/www.scientific.net/amr.97-101.4206

2010-01-01

Advanced Materials Research

Abstract:A compensation method was proposed for correcting wheel setting error and residual form error in nanogrinding of axisymmetric surfaces. In this method, profile data from on-machine measurement were used to obtain the setting error of grinding wheel, as well as the normal residual form error. Compensation model of single-point inclined-axis grinding was built up for generating new compensation path. Grinding test of aspheric tungsten carbide mould was conducted to evaluate performances of the compensation method. A profile error of 182 nm (peak to valley) and average surface roughness of 1.71 nm were achieved. These results indicated that the form error compensation method may significantly improve form accuracy of ground surface.
Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

Shaohui Yin,Haifeng Li,Yufeng Fan,Yongjian Zhu,Fengjun Chen

DOI: https://doi.org/10.4028/www.scientific.net/amr.97-101.2192

2010-01-01

Advanced Materials Research

Abstract:In this paper, a new method of improving uniformity of surface roughness through controlling feed rate was proposed. A CNC grinding software based on feed rate controlling and error compensation for aspheric surface was developed. The structure and function of the software system was described. An experimental test for grinding aspheric surface of WC mould was conducted for evaluating the performance of the compensation process by using this developed software. After compensation grinding for several times, form accuracy of PV 126 nm, roughness of Ra 3.4 nm can be obtained.
An efficient generation grinding method for spur face gear along contact trace using disk CBN wheel

Xiaomeng Chu,Yanzhong Wang,Shaofeng Du,Yizhan Huang,Guoying Su,Douwei Liu,Lei Zang

DOI: https://doi.org/10.1007/s00170-020-05927-1

IF: 3.563

2020-08-21

The International Journal of Advanced Manufacturing Technology

Abstract:In order to further improve the grinding efficiency of face gear, this paper presents a novel method for grinding face gear along contact trace using disk CBN wheel. Firstly, the grinding principle of face gear is studied, and the tooth surface equations of rack and gear shaper cutter are derived, thus formulating the tooth surface equation of disk CBN wheel. Secondly, considering the structure of the face gear grinding machine tool and the impact of the grinding wheel parameters on the face gear tooth surface, the disk CBN wheel configuration is proposed, and the calculation method of the tool position of the face gear grinding is established. Thirdly, according to the structural characteristics of the grinding wheel, the tooth surface contact trace of the face gear is designed, and the face gear development grinding processing method along the tooth surface contact traces is presented. Finally, a test of grinding spur face gear with disk CBN wheel is carried out on a laboratory-made five-axis face gear processing machine. The test results verified the correctness of the face gear grinding. Compared with the dish wheel for grinding face gear, the grinding method proposed in this paper can further improve the grinding efficiency of face gear. This method will break new ground for the engineering application of the face gear.
An approximate design method of grinding worm with variable meshing angle and grinding experiments of face gear

Hui Guo,Shuyan Zhang,Tianpeng Wu,Ning Zhao

DOI: https://doi.org/10.1016/j.mechmachtheory.2021.104461

IF: 4.93

2021-12-01

Mechanism and Machine Theory

Abstract:A kind of approximate definition method of grinding worm surface with variable meshing angle is proposed for grinding face gears. The influence of the parameter of the virtual shaper and the alignment errors of the grinding worm on the tooth surface deviation of face gear is investigated. A set of nonlinear contact equations is established for dressing grinding worm with standard double cone dressing wheel based on a kind of 5-axis CNC machine tools. The compensation method used to correct deviations of face gear tooth surface by dressing the corresponding points on the grinding wheel is derived, based on the corresponding relation between surface points of face gear and the meshing angles. Two grinding experiments are performed for both orthogonal and non-orthogonal face gears. The experiments indicated that the tooth surface precision of face gear ground by this method can reach level 6 by Chinese standard GB11365-89 comparing with the same size of bevel gear, and the pitch precision can reach level 4 which is higher.

engineering, mechanical
An optimized calculation method of the grinding wheel profile for the helical flute forming grinding

Lei Jiang,Zhihui Yang,Yong Li,Guofu Ding,Xin He

DOI: https://doi.org/10.1007/s00170-024-13447-5

IF: 3.563

2024-03-23

The International Journal of Advanced Manufacturing Technology

Abstract:The forming grinding process is a crucial method for helical flute grinding of the end mill and screw tap, and the grinding wheel profile is the key to ensure the precision of the helical flute, which is constrained by the grinding wheel posture. However, the existing methods have some deficiencies such as the invalidity or uneven wear problems. In this paper, an optimized calculation method of the grinding wheel profile for the forming grinding of the helical flute is proposed, including the suitable grinding posture correspondingly. Firstly, the parametric models of the helical cutting edge and the helical flute surface are established. Secondly, the contact condition between the grinding wheel and the flute is deduced to calculate the grinding wheel profile by the envelop theory. Thirdly, an optimization method for grinding wheel profile is proposed, which could predict of the solution interval, avoid the profile intersection, and improve wear resistance. Finally, the method was verified by a series of simulations and experiments, and the results show that the method could meet the grinding precision requirements and expand the application range of forming grinding technology in helical flute.

engineering, manufacturing,automation & control systems
A Designing and Generating Method for Grinding Relief Surfaces of a Dual-Cone Double-Enveloping Hourglass Worm Gear Hob

Chengjie Rui,Haitao Li,Jie Yang,Wenjun Wei,Xuezhu Dong

DOI: https://doi.org/10.1115/1.4041053

2018-09-18

Journal of Mechanical Design

Abstract:Land widths and relief angles of a dual-cone double-enveloping hourglass worm gear hob are important factors that influence the life and the hobbing performance of the hob. Both of them are obtained by generating relief surfaces of the hob. Due to the reason that all teeth of this type of hob have different profiles with each other, all of the relief surfaces are difficult to generate for keeping all cutting teeth with uniformed relief angles and uniformed land widths. For the purpose that land widths and relief angles could be machined precisely, this paper puts forward a designing and generating method for grinding the relief surfaces. The relief surfaces are ground using the same double-cone grinding wheel as grinding the helical surfaces of the worm. Based on the theory of gearing, the mathematical model for grinding relief surfaces is built. Motion parameters when grinding the different points of the land edges on different teeth of the hob are solved. A generating simulation is built by putting those motion parameters into a four-axis hourglass worm-grinding machine. The results of the simulation show that the relief surfaces can be ground continuously and the land widths and the relief angles meet the requirements.

engineering, mechanical
An iterative optimization algorithm for posture and geometric parameters of grinding wheel based on cross-section sensitivity and matching constraints of solid end mills

Yong Li,Guofu Ding,Changjiu Xia,Yangcheng Ning,Lei Jiang

DOI: https://doi.org/10.1016/j.jmapro.2022.05.011

IF: 5.684

2022-07-01

Journal of Manufacturing Processes

Abstract:Grinding wheel posture and geometric parameters are the key to optimizing the grinding process for helical grooves of solid end mills. However, the current envelope calculation models have not done enough research on the influence of the grinding wheel discretization method and grinding kinematics models mainly focus on helical grooves with constant core radius. Moreover, the matching error of the overall cross-section curve is ignored. These problems can reduce model generality, affect final calculation results, and cause inferior cutting performance. Therefore, a novel optimization algorithm for grinding wheel posture and geometric parameters is developed in this paper. Firstly, a parametric grinding wheel modeling method with adaptive adjustment of control variables is proposed, and a generalized grinding kinematics model for variable core radius is established. Then, by analyzing the sensitivity of cross-section parameters and the formation mechanism of the core radius, an iterative strategy based on parameter sets is established. Under the condition that the core radius is ensured in advance, the matching errors of rake angle, groove width, and overall cross-section curve are considered comprehensively to optimize the grinding wheel posture and geometric parameters. Finally, the proposed method is verified by simulation and machining. The results indicate that the proposed method can realize the envelope calculation of the helical groove with variable core radius, and optimize the grinding wheel posture and geometric parameters accurately and efficiently.

engineering, manufacturing
A finishing method for the continuous generation of spur face gears with shaving cutters

Yanzhong Wang,Guoying Su,Xiaomeng Chu,Yizhan Huang,E Shiyuan,Wei Zhang,Yang Liu,Shiyuan E

DOI: https://doi.org/10.1016/j.ijmecsci.2020.106020

IF: 7.3

2021-01-01

International Journal of Mechanical Sciences

Abstract:<p>Face gear drives have been widely applied in power transmission, but the finishing of continuous generation is a difficult problem. This is mainly because the teeth of face gears are on a plane, which leads to interference by worm grinding. Hence, a shaving method for face gears is proposed in this paper. This work studies the theory of face gear shaving, the causes of mid-concave phenomena based on load tooth contact analysis (LTCA), a solution for the modification coefficient of the shaving cutter and a control method for the cutter location point. The experimental results show that the maximum machining error is <span class="math"><math>−12.7μm,</math></span> that many generating lines appear and that the residual stress increases by 49.2% in comparison with that of the grinding tooth surface. The present study suggests that the shaving method for spur face gears can not only achieve the finishing of continuous generation but also improve the surface integrity of the gear.</p>

engineering, mechanical,mechanics
Grinding Methodology Research for Helical Drill Based on the Biglide Parallel Grinder

ping zou,riqing lv,xing jun gao,fei li

DOI: https://doi.org/10.1007/978-3-319-18126-4_15

2015-01-01

Abstract:A new grinding method for the helical drill point based on a biglide parallel grinder was introduced in this paper. According to the mechanism description and kinematics analysis about the biglide parallel grinder, the mathematical models for the flank surface near the chisel edge was established in Cartesian coordinate frame and parametric form respectively. Moreover, the simulation of the flank surface was conducted. It was also discussed the effects of the velocity of the two glider and the distance between two gliders on determining the flank surface distribution near the chisel edge. Experiments have been implemented on the biglide parallel grinder and the helical drill point can be realized based on optimizing grinding parameters of the biglide parallel grinder. Therefore, the grinding helical drill can be obtained with the optimized parameters.
Geometric Parameter Optimization for Axial Modification in Helical Gear Form Grinding

Bo Zhang,Yu Zhang,Longjie Zhang,Qingyu Li,Xiaoyi Wang

DOI: https://doi.org/10.3390/machines12090657

IF: 2.899

2024-09-21

Machines

Abstract:During the axial modification in helical gear form grinding, the contact line between the grinding wheel and the gear constantly changes, and the additional radial motion can cause a "tooth surface twist" phenomenon. An optimization method for tooth surface twist error was proposed to address this. Based on the gear meshing principles, a mathematical model for axial modification in form grinding was established to solve for the instantaneous contact lines at various positions on the actual modified tooth surface. By analyzing the influence of the grinding wheel installation angle on the axial modification contact line, an optimization model was constructed to reduce the twist of the transverse profile, reduce the twist of the flank profile, reduce the helix deviation, and improve the form grinding efficiency. The practical implications of this research are significant, as the Particle Swarm Optimization (PSO) algorithm was employed to optimize the form grinding parameters, leading to a method that effectively reduced tooth surface twist error and improved the form grinding accuracy of the modified tooth surface.

engineering, mechanical, electrical & electronic
Ultra Precision Grinding of Spherical Convex Surfaces on Combination Brittle Materials Using Resin and Metal Bond Cup Wheels

WK Chen,H Huang

DOI: https://doi.org/10.1016/s0924-0136(03)00788-x

IF: 6.3

2003-01-01

Journal of Materials Processing Technology

Abstract:This paper reports on a parametric investigation on ultra precision grinding of combination materials of zirconia and silica. Rotational grinding was adopted for the generation of spherical convex surfaces using metal and resin bonded cup wheels. The wheels have grit sizes ranging from 4 to 20μm. A simplified geometrical model was used to analyse the effects of wheel wear on ground dimensional accuracy. Besides, a new truing and dressing technique of the cup wheel using loose abrasives was introduced. This new truing and dressing technique enables the precision profile truing of cup wheels. With the well prepared cup wheel, high form accuracy (average PV ∼0.25μm) with mirror/near-mirror surface finish for silica and zirconia was achieved.
A parametric evaluation model of abrasive interaction for predicting tooth rough surface in spiral bevel gear grinding

Weihua Zhou,Jinyuan Tang,Kaibin Rong,Zhuan Li,Wen Shao

DOI: https://doi.org/10.1016/j.jmapro.2024.11.012

IF: 5.684

2024-11-22

Journal of Manufacturing Processes

Abstract:The grinding of complex surface parts, such as spiral bevel gears (SBGs), involves intricate machine-tool settings and localized machining conditions. These factors contribute to the nonuniformity of the macro envelope and the complex cumulative behavior of grits, thereby increasing the challenge of predicting surface roughness. This paper proposes a novel parametric model that directly relates local envelope parameters influenced by machine-tool settings to abrasive interaction features. Four inclination angles are defined to describe the irregular abrasive posture and the coupled kinematics of generating grinding. Additionally, the calculation strategy of undeformed chip thickness with discrete grinding groove overlap is introduced. Based on the parametric model and the macro wheel-tooth geometry, we further simulate the micro-tooth surface and validate the simulation through experiments. The results indicate that the roughness of the convex surface of the pinion is lower compared to the concave surface. This discrepancy arises from variations in the equivalent contact radius and the inclined abrasive posture. Increasing the speed ratio between the tool rotation and the generating effectively reduces the roughness distribution discrepancy. This work provides a valuable guidance for the manufacturing of high-performance SBGs and quantifies the micro-topography evolution for any abrasive geometry, kinematics, and posture.

engineering, manufacturing
A novel flank correction method for face gear ground by CNC worm wheel grinder

Shilong Wang,Maohao Xia,Chi Ma,Jianpeng Dong,Sibao Wang,Jun Wang

DOI: https://doi.org/10.1016/j.mechmachtheory.2023.105435

IF: 4.93

2023-07-21

Mechanism and Machine Theory

Abstract:Face gear will be widely used in the fields of intersecting shaft transmission due to its insensitivity to pinion axis misalignment. Considering the requirements of machining efficiency, face gear is mainly ground by worm wheel. However, due to the complexity of face gear tooth flank, worm wheel profile and grinder machining settings, the ground tooth flank accuracy is very difficult to meet the actual requirements. This paper proposes a novel flank correction method to improve face gear tooth flank accuracy based on computer numerical control (CNC) grinder. Firstly, the tooth flank is enveloped by worm wheel in a continuous indexing process. Secondly, the machining settings of grinder and a 5 × 9 measurement grid for coordinate measuring machine (CMM) are determined. Lastly, a high-order flank correction model is established and solved iteratively considering the measured tooth flank deviations, and the sum of squared errors of deviation is reduced by 91.6%. A machining simulation is carried out to verify the flank correction method. This method can significantly improve face gear tooth flank accuracy and provide a basis for its widespread promotion.

engineering, mechanical
A novel wheel path generation approach for grinding taper end-mills subjected to variable cross-section

Liming Wang,Jianping Yang,Yang Fang,Jiang Zhu,Jianfeng Li

DOI: https://doi.org/10.1007/s00170-023-12315-y

IF: 3.563

2023-09-30

The International Journal of Advanced Manufacturing Technology

Abstract:Taper end-mills are extensively employed in CNC machining and the flute is integral to the cutting efficacy of the end-mill. Nonetheless, forming the grinding wheel path for a taper end-mill is exceptionally challenging owing to its intricate structure and variable cross-section. In traditional methods, the wheel path is generated by experience, and the accuracy of flute parameters cannot be guaranteed. To overcome those problems, this paper proposed a wheel path generation approach for taper end-mills flute-grinding subject to variable cross-section, which is capable of ensuring the accuracy of parameters of the cross-section. In the wheel path generation, the taper end-mill is discretized into a series of finite slices, which can be transformed into solving a series sub-problem of grinding cylindrical end-mills. To eliminate the interference and discontinuity caused by the discretization, the enhancement based on sensitivity analysis and smoothing are used to optimize the grinding wheel path. Finally, the approach is validated by both simulation and experiments. The results indicated that this approach is capable of generating the wheel path for grinding the taper end-mill flute accurately and efficiently subject to the variable cross-section parameters.

engineering, manufacturing,automation & control systems
A form-grinding wheel optimization method for helical gears based on a PSO-SVM model

Yan Li,Gang Li,Zhonghou Wang,Wenmin Zhu

DOI: https://doi.org/10.1016/j.precisioneng.2024.04.007

IF: 3.315

2024-04-13

Precision Engineering

Abstract:A gear form-grinding optimization method is proposed to obtain an optimal profile of a form-grinding wheel by solving a transcendental equation of the contact line between a form-grinding wheel and a helical gear workpiece. Since the equation of the contact line is transcendental, the relationship between the installation angle of the form-grinding wheel and the shape of the contact line cannot be represented by explicit functions, which makes it difficult to obtain the optimal profile of the form-grinding wheel. An optimization method is proposed with three evaluation parameters that are the overrun, the shift, and the offset. Some gear form-grinding performances, such as machining stroke, tooth deviation, and grinding chatter, can be quantitatively described using those evaluation parameters. Further, a method for solving evaluation parameters is proposed, which uses a particle swarm optimization-support vector machine (PSO-SVM) model with the advantage of small-sample robustness to solve evaluation parameters. The PSO-SVM model is trained with the installation angle of the form-grinding wheel as the input and the evaluation function as the output. The regression error results of the evaluation function indicate the PSO-SVM model can respond correctly. Gear form-grinding test results show the proposed method can effectively improve grinding accuracy.

engineering, manufacturing,nanoscience & nanotechnology, multidisciplinary,instruments & instrumentation
A topological flank modification method based on contact trace evaluated genetic algorithm in continuous generating grinding

Xiaoqing Tian,Dan Li,Xiaoyong Huang,Haijun Liu,Jiang Han,Lian Xia

DOI: https://doi.org/10.1016/j.mechmachtheory.2022.104820

IF: 4.93

2022-06-01

Mechanism and Machine Theory

Abstract:A method for topological modification of gear flanks in continuous generating grinding based on contact trace evaluated genetic algorithm (CTEGA) has been proposed to solve the problem of flank twist caused by lead modifications of gear flanks. Firstly, according to the theory of conjugate surface, a mathematical model calculating the generating surfaces of worm wheel as well as representing the wheel as two-parametric form spiral surface has been established. Secondly, by representing the radial, axial, and tangential feed of worm wheel in forms of polynomials of the axial feed of worm wheel, a mathematical model of generating gear grinding process has been established where the axis linkage relationship in CNC machine is intentionally changed for topological modification of target tooth surface. Finally, the validity of the proposed topological modification method was numerically demonstrated using a helical gear made by the CNC continuous generating grinding machine. The method proposed in this paper can realize the topological modification of gear flanks by only adjusting motions of numerically controlled axes in the grinding process without adopting a specific dressing of the grinding wheel.

engineering, mechanical
Research on the spindle opimazing and variational design technique of plane grinder

Zhongqi Wu,Guodong Lu,Ming Guo,Changlin Huang

1997-01-01

Abstract:Proceed from the needs of plane grinder CAD, two advanced techniques are studied. "Removing toy bricks" mechanics model is presented. Through the solver of the model and optimization of the parameters, volume optimization and stiffness optimization of grinder spindle is realized. New variational design method - variation reasoning is presented. On the basis of building variational design model automatically, a new design graph can be obtained automatically when dimension driven. It is specially applicable to optimizing design, modifying design and series design. The results studied possess generic significance.

A New Method of Variable Forming Point Grinding Revolving Parts with Convex Function Generatrix

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Error Compensation in One-Point Inclined-Axis Nanogrinding Mode for Small Aspheric Mould

Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

An efficient generation grinding method for spur face gear along contact trace using disk CBN wheel

An approximate design method of grinding worm with variable meshing angle and grinding experiments of face gear

An optimized calculation method of the grinding wheel profile for the helical flute forming grinding

A Designing and Generating Method for Grinding Relief Surfaces of a Dual-Cone Double-Enveloping Hourglass Worm Gear Hob

An iterative optimization algorithm for posture and geometric parameters of grinding wheel based on cross-section sensitivity and matching constraints of solid end mills

A finishing method for the continuous generation of spur face gears with shaving cutters

Grinding Methodology Research for Helical Drill Based on the Biglide Parallel Grinder

Geometric Parameter Optimization for Axial Modification in Helical Gear Form Grinding

Ultra Precision Grinding of Spherical Convex Surfaces on Combination Brittle Materials Using Resin and Metal Bond Cup Wheels

A parametric evaluation model of abrasive interaction for predicting tooth rough surface in spiral bevel gear grinding

A novel flank correction method for face gear ground by CNC worm wheel grinder

A novel wheel path generation approach for grinding taper end-mills subjected to variable cross-section

A form-grinding wheel optimization method for helical gears based on a PSO-SVM model

A topological flank modification method based on contact trace evaluated genetic algorithm in continuous generating grinding

Research on the spindle opimazing and variational design technique of plane grinder