Abstract:In order to improve the cutting performance of the hourglass worm gear hob and improve the cutting conditions of the teeth on both sides, it is necessary to constrain the absolute value of the rake angle of each tooth to be small and control the balance of the rake angles on the left and right sides. Based on the principle of enveloping tooth surface formation (Dong, 1989; Wu, 2009), this paper proposes a method of forming a spiral groove rake face with a variable transmission ratio, so that the rake face of each tooth is formed in segments to achieve the design requirements of small absolute value and balance on both sides. Taking the basic worm speed ω of the hob, the moving speed v of the machine tool cutter, and the installation offset Δx of the cutter as experimental factors, taking the rake angle on both sides of five teeth of the hob as response values, a three-factor three-level response surface analysis method is used to establish mathematical models between each experimental factor and the rake angle on both sides, and analyze the interaction between each factor. The results show that: The order of influence of the three selected factors on the rake angle on both sides is: basic worm speed, machine tool cutter moving speed, cutter installation offset; optimize and obtain the optimal parameter combination for each of five teeth in a spiral groove, perform simulation processing and measure rake angle. The results show that the rake angles on both sides of five teeth are controlled within ±0.3°, which is 94% lower than that when five teeth are processed simultaneously with a fixed transmission ratio. This indicates that rake faces of small rake angle can be designed by optimizing processing parameters, which is conducive to improving and balancing the cutting performance of hobs.

An approximate design method of grinding worm with variable meshing angle and grinding experiments of face gear

An approximate grinding and deviation correction method for helical face gear

A New Method of Variable Forming Point Grinding Revolving Parts with Convex Function Generatrix

A novel flank correction method for face gear ground by CNC worm wheel grinder

A Designing and Generating Method for Grinding Relief Surfaces of a Dual-Cone Double-Enveloping Hourglass Worm Gear Hob

A CNC Grinding Method and Envelope Residual Model for Face Gear

A method to solve over-cutting of forming dressing in continuous generating grinding for face gear

The continuous generating grinding method for face gears based on general cylindrical gear grinding machine

A high-precision fitting and dressing method for the flex and circular rigid splines with involute tooth profile in gear form grinding

A precision generating hobbing method for face-gear based on worm hob

A Novel Precision Grinding Method for Roller Enveloping Hourglass Worm

Study on the tooth profile and meshing equation of the anti-backlash double-roller enveloping hourglass worm with errors

Position-dependent rough surface formation in face gear worm grinding

An efficient generation grinding method for spur face gear along contact trace using disk CBN wheel

Design method and parameter optimization of small angle rake face of hourglass worm gear hob

A precision generating hobbing method for face gear with assembly spherical hob

Simulation analysis and experiment of instantaneous temperature field for grinding face gear with a grinding worm

An innovative geometric error compensation of the multi-axis CNC machine tools with non-rotary cutters to the accurate worm grinding of spur face gears

A Grinding Method with an Innovative, Efficient, and Weight-Saving Design for Double Helical Gears

Modeling of micro-tooth topography in face gear grinding considering dynamic features of geometric-kinematic