Abstract:The dynamic recrystallization (DRX) behavior and hot workability of Mg–8Gd–4Sm–1Zn–0.5Zr alloy are investigated by hot compression experiments. The critical strain model, DRX kinetic model and the processing maps are constructed by the stress–strain curves. According to the processing maps and evolution of the microstructure of the alloy at different strain conditions, the mechanisms of instability regions are studied, and the most suitable regions for hot working are identified. The dynamic recrystallization (DRX) behavior and hot workability of Mg–8Gd–4Sm–1Zn–0.5Zr alloys are investigated by the Gleeble‐1500 test machine. The tests are performed at 350–470 °C with a strain rate of 0.002–1 s−1. The results show that the stress–strain curves exhibit a typical single‐peak DRX behavior. The DRX critical strain model of the alloy is constructed according to the inflection characteristics of the work hardening rate curve. The DRX kinetic model is constructed according to Avrami equation. The 3D processing maps are obtained based on the dynamic material model. The mechanisms of instability regions are investigated by combining the processing map and the microstructural evolution, and the most suitable regions for hot working are identified. The critical strain εc of the alloy is reduced at higher deformation temperatures or lower strain rates, and the DRX more easily occurs. That is, the material is more suitable for hot working. The optimum domain for hot working of Mg–8Gd–4Sm–1Zn–0.5Zr alloy is the temperature range of 400–470 °C and strain rate range of 0.002–0.05 s−1.

Dynamic Recrystallization Behavior and Hot Workability of Mg–2.0Zn–0.3Zr–0.9Y Alloy by Using Hot Compression Test

Hot compression behavior, simulation verification and dynamic recrystallization mechanism of Mg-Gd-Y-Zr alloy

Hot Deformation Behavior of Mg-8Li-3Al-2Zn-0.2Zr Alloy Based on Constitutive Analysis, Dynamic Recrystallization Kinetics, and Processing Map

Hot Deformation and Processing Map of As-Homogenized Mg–9Gd–3Y–2Zn–0.5Zr Alloy

Hot Deformation and Dynamic Recrystallization Behaviors of Mg–Gd–Y–Zr Alloy

Dynamic Precipitation and Recrystallization Mechanism During Hot Compression of Mg-Gd-Y-Zr Alloy

Deformation Behavior and Dynamic Recrystallization of a Mg–Zn–Y–Zr Alloy

Hot Deformation Behavior and Microstructure Evolutions of As-Forged Mg-Gd-Y-Zn-Zr Alloy

Characterization of Hot Deformation Behavior and Processing Maps of Mg-3Sn-2Al-1Zn-5Li Magnesium Alloy

Construction of Dynamic Recrystallization Critical Strain Model, Kinetic Model, and Hot Workability of Mg–8Gd–4Sm–1Zn–0.5Zr Alloy

Constitutive Modeling of Dynamic Recrystallization Kinetics and Processing Maps of Mg–2.0Zn–0.3Zr Alloy Based on True Stress–strain Curves

Deformation Behavior and Dynamic Recrystallization of Mg-Y-Nd-Gd-Zr Alloy

The Effect of Icosahedral Phase on Dynamic Recrystallization Evolution and Hot Workability of Mg-2.0Zn-0.3Zr-0.2Y Alloy

The Effect of LPSO Phase on Hot Deformation Behavior and Dynamic Recrystallization Evolution of Mg–2.0Zn–0.3Zr–5.8Y Alloy

Dynamic Recrystallization Mechanisms During Hot Compression of Mg–Gd–Y–Nd–Zr Alloy

Dynamic Recrystallization Behavior of Mg-Gd-Y-Zr Alloy During Hot Compression

Microstructural Study of a Mg-Zn-Zr Alloy Hot Compressed at a High Strain Rate

Thermal Deformation Behavior and Processing Maps of As-Homogenized Mg-5.8 Zn-0.5 Zr-1.0 Yb Alloy

Deformation Behavior, Microstructure Evolution and Hot Workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr Alloy

Hot Compressive Deformation Behaviors of Mg–10Gd–3Y–0.5Zr Alloy

Effect of initial microstructure on the dynamic recrystallization behavior of Mg-Gd-Y-Zr alloy