Abstract:In order to evaluate the impacts of volatile organic compounds (VOCs) emissions from building materials on the indoor air quality beyond the standard chamber test conditions and test period, mechanistic emission source models have been developed in the past. However, very limited data are available for the required model parameters including the initial concentration ( C m0 ), in-material diffusion coefficient ( D m ), partition coefficient ( K ma ), and convective mass transfer coefficient ( k m ). In this study, a procedure was developed for estimating the model parameters by using VOC emission data from standard small chamber tests. In the procedure, initial values of the model parameters were refined by multivariate regression analysis of the measured emission data. To verify the procedure and estimate its uncertainty, simulated chamber test data were generated by adding 10% experimental uncertainties on the theoretical curve from the analytical solution to a mechanistic emission model. Then the procedure was applied to the generated data to estimate the model parameters. Results indicated that estimates converged to the original parameter values used for the data generation and the error of estimated parameters D m , C m0 and K ma were within ±10%, ±23%, and ±25% of the true values, respectively. The procedure was further demonstrated by applying it to estimate the model parameters from real chamber test data. Wide application of the procedure would result in a database of mechanistic source model parameters for assessing the impact of VOC emissions on indoor pollution load, which are essential input data for evaluating the effectiveness of various indoor air quality (IAQ) design and control strategies as well as the energy required for meeting given IAQ requirements.

Screening-level estimates of indoor exposure to volatile organic compounds emitted from building materials

Measuring key emission parameters of VOC from materials based on concentration trajectory in ventilated chamber

Development of a Procedure for Estimating the Parameters of Mechanistic VOC Emission Source Models from Chamber Testing Data

A Fast and Accurate Airtight Chamber Method for Determining the Characteristic Parameters of VOC Emission from Building Materials

Early Stage C-history Method: Rapid and Accurate Determination of the Key SVOC Emission or Sorption Parameters of Indoor Materials

A new method of measuring VOC emission characteristics of dry building materials

Dynamic—static Chamber Method for Simultaneous Measurement of the Diffusion and Partition Coefficients of VOCs in Barrier Layers of Building Materials

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

A Pre-Assessment and Pollution Prevention Tool for Indoor Volatile Organic Compound Simulations During the Interior Design Stage

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

A General Regression Method for Accurately Determining the Key Parameters of VOC Emissions from Building Materials/furniture in a Ventilated Chamber

Alternately Airtight/ventilated Emission Method: A Universal Experimental Method for Determining the VOC Emission Characteristic Parameters of Building Materials

New method for determining VOC emission parameters for dry building materials

A Novel Method for Measuring the Diffusion, Partition and Convective Mass Transfer Coefficients of Formaldehyde and VOC in Building Materials

Measurement Methods and Impact Factors for the Key Parameters of VOC/SVOC Emissions from Materials in Indoor and Vehicular Environments: A Review

C-History Method: Rapid Measurement Of The Initial Emittable Concentration, Diffusion And Partition Coefficients For Formaldehyde And Vocs In Building Materials

Robust nonfitting way to determine mass diffusivity and initial concentration for VOCs in building materials with accuracy estimation.

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

Modeling Volatile Organic Compound (VOC) Concentrations Due to Material Emissions in a Real Residential Unit. Part I: Methodology and a Preliminary Case Study

A new method, c-history based sink effect method, of determining key physical properties of VOC emission from dry building materials