Abstract:GAC filtration of municipal wastewater was optimized and intensified, making its implementation and operation directly after secondary clarification possible and relevant. GAC was first selected based on laboratory tests. Performances on organic micropollutants were linked to the repartition of BET surface between micropores and meso/macropores. At pilot scale, in order to limit the impact of head loss, downflow declogging sequences (DCS) were implemented and upflow filtration tested. 6 to 12 DCS per day led to a 4.7-5.5-fold increase of particles retention capacity between backwashes (cycle duration of 20-120 h), and upflow operations improved head loss evolution profile with only a slight GAC (<15 %) expansion. DCS allows backwash frequency reduction, enabling significant water savings. Both adaptations maintained high organic micropollutants removals compared to a review of 16 GAC studies at pilot or full-scale, results being in the upper range. A specific dose of 2.0-2.5 g GAC/gC was necessary to obtain an average removal of pharmaceuticals and benzotriazole of 80 % at 20 min contact time, which is comparable to PAC and low granulometry GAC. Higher doses are needed for PFAS but >80 % removals are achievable. Particles, TKN, particulate phosphorus and organic matter are well removed by GAC filtration in both configurations. Biological activity is observed through nitrogen transformation in the GAC bed. Heavy metals are greatly removed in GAC filtration, in particular Cd, Cu, Ni and Pb, probably through biosorption onto the biofilm, developed within the GAC bed. For wastewater reuse applications, GAC filtration has an added value through physicochemical quality improvement and fecal contamination indicators removal of 1 log, facilitating the implementation and optimizing the design of a post-disinfection. Antibiotic resistant bacteria and antibiotic resistance genes are also partially retained in GAC filtration. Finally, biological wastewater treatments combined to GAC filtration is a good solution to effectively treat organic micropollutants together with heavy metals and preparing post-disinfection for reuse.

Passivation Process and the Mechanism of Packing Particles in the Fe-0/Gac System During the Treatment of Abs Resin Wastewater

Treatment of wastewater from acrylonitrile–butadiene–styrene (ABS) resin manufacturing by Fe0/GAC–ABFB

Enhanced nitrogen removal of aquaculture wastewater in the combined biological aerated filter: the effect of GAC location setting

Combination of catalytic ozonation by regenerated granular activated carbon (rGAC) and biological activated carbon in the advanced treatment of textile wastewater for reclamation.

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Mechanistic insight into heterogeneous Fenton-like catalysis with M-Al2O3/SiO2 (M = Fe, Co and Ni) for acrylonitrile mineralization from real ABS resin wastewater: Optimization and toxicity assessment

Membrane Fouling Mitigation by Fluidized Granular Activated Carbon: Effect of Fiber Looseness and Impact on Irreversible Fouling

Advanced water treatment process by simultaneous coupling granular activated carbon (GAC) and powdered carbon with ultrafiltration: Role of GAC particle shape and powdered carbon type

Enhanced AGS by granular activated carbon loaded with nano iron when treating low strength and low COD/TN ratio municipal wastewater: Microbial metabolism, electron transfer and enhancement mechanism

Enhanced performance and mechanism of adsorption pretreatment for alleviating membrane fouling in AGMBR: Impact of structural variations in carbon adsorbents

Comparing Powdered and Granular Activated Carbon Addition on Membrane Fouling Control Through Evaluating the Impacts on Mixed Liquor and Cake Layer Properties in Anaerobic Membrane Bioreactors

Pre-depositing versus mixing powdered activated carbons for gravity-driven membrane systems during treated domestic wastewater filtration: Permeability stabilization and removal performance

In-depth insights into Fe(III)-doped g-C 3 N 4 activated peracetic acid: Intrinsic reactive species, catalytic mechanism and environmental application

Catalytic Degradation of Hexafluoropropylene Oxide Trimeric Acid During the Hydrothermal Regeneration of Spent Activated Carbon

Effect of fluidized granular activated carbon (GAC) on critical flux in the microfiltration of particulate foulants

Reduction of fouling of gravity-driven membrane by combined treatment of persulphate/nanoscale zero-valent iron/ultraviolet and dynamic dual coagulant flocs layer

The Potential Roles of Granular Activated Carbon in Anaerobic Fluidized Membrane Bioreactors: Effect on Membrane Fouling and Membrane Integrity

Effect of mechanical scouring by granular activated carbon (GAC) on membrane fouling mitigation

Insights into the alleviation of membrane fouling in AGMBR through thermal/Fe 2+ -activated persulfate pre-oxidation: Performance and mechanisms

Time-Gradient Nitric Acid Modification of CF Biofilm-Carrier and Surface Nature Effects on Microorganism Immobilization Behavior in Wastewater

Mastering granular activated carbon filtration to remove organic micropollutants, antibiotic resistance and metals for municipal wastewater reuse