Structure-activity relationship of VOx/CeO2 nanorod for NO removal with ammonia

Yue Peng,Chizhong Wang,Junhua Li

DOI: https://doi.org/10.1016/j.apcatb.2013.07.059

2014-01-01

Abstract:•Vanadia species suppress the reducibility and defect sites of ceria.•Polymeric VOx, ceria provide Lewis and CeVO4 provide Brønsted acid sites.•Polymeric VOx low energy barriers and CeVO4 increase rate constant.•The reaction mechanism depends on the temperature.

What problem does this paper attempt to address?

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Qimin Zhou,Kailin He,Xiaoxiang Wang,Khak Ho Lim,Pingwei Liu,Wenjun Wang,Qingyue Wang

DOI: https://doi.org/10.1016/j.apcata.2022.118796

2022-01-01

Abstract:Low-temperature selective catalytic reduction with NH3 (LT-SCR) is a promising approach for NOx remediation. This work utilized bimetallic metal-organic frameworks (MOFs) to prepare CeMOx (M=Ti, Cu) catalysts allowing the homogeneous distribution of promoters to investigate LT-SCR explicitly. The strong interfacial interaction between nanoscale-mixed components was characterized on CeTiOx by HRTEM, micro-Raman, and XPS, resulting in high acidity and good redox properties with abundant Ce3+ and Ti4+. It obtained over 80% conversion from 180 degrees C to 300 degrees C with 100% N2 selectivity, and maintained stable performance in SO2/H2O at a high GHSV of 150,000 h-1. In situ DRIFTS reveals that NH3 adsorption was promoted on CeTiOx, which accelerated reaction between NOx and adsorbed NH3 via Eley-Rideal mechanism. Meanwhile, the aliovalent substitution of ceria by Cu2+ was observed on CeCuOx, forming oxygen vacancies. Its high redox properties enhanced NOx conversion by Langmuir-Hinshelwood mechanism, but triggered NH3 peroxidation, leading to poor N2 selectivity.
High-Performance Strategy and Degradation Mechanism of Cezrvox Catalysts for Nox Reduction

Guobo Li,Yining Cai,Jie Yan,Yuehan Hou,Hunan Chen,Yu Zou,Wenming Liu,Zhenguo Li,Shengyong Lu,Honggen Peng

DOI: https://doi.org/10.1016/j.seppur.2024.128288

IF: 8.6

2024-01-01

Separation and Purification Technology

Abstract:The denitrification (deNOx) performance of catalysts is affected directly by redox ability and surface acidity, and regulating the balance between both of which is a major step toward enhancing the performance of catalysts. The CeZrOx catalyst has garnered widespread attention in the field of deNOx due to its excellent oxygen storage capacity. This study uses VOx as an acid promoter to adjust the redox centers and acidity sites on the CeZrOx catalyst, utilizing the synergistic effect of both to demonstrate its optimal deNOx performance. The experimental results indicate that doping an appropriate amount of VOx can effectively enhance the NH3-SCR activity of Ce0.60Zr0.40Ox, while also improving its resistance to SO2 and H2O. Characterization results confirm that, the surface active oxygen species on Ce0.50Zr0.40V0.10Ox increase and V doping enhances the catalyst's redox properties comparing with Ce0.60Zr0.40Ox, which obtains more Br & oslash;nsted and Lewis acid sites, adjusting the balance between the redox centers and acidity sites, thus playing a synergistic promoting role. Ce0.50Zr0.40V0.10Ox possesses the lowest apparent activation energy (Ea), enhancing the adsorption capability for NH3 and increasing the reaction rate of adsorbed NH3 and gaseous NO + O2, thereby exhibiting optimal deNOx performance. The surface VOx and ZrOx would provide adsorption sites for gas molecules, utilizing the synergistic effect of both to demonstrate its optimal deNOx performance on ZrVOx-CeO2 surface. This provides valuable insight for the preparation of new and efficient deNOx catalysts using the strategy of synergistically promoting oxygen reduction sites and acidity sites.
New Insights into the Role of Vanadia Species As Active Sites for Selective Catalytic Reduction of NO with Ammonia over VOx/CeO2 Catalysts

Farong Ji,Chenxu Li,Jianqiang Wang,Jun Wang,Meiqing Shen

DOI: https://doi.org/10.1016/j.jre.2019.05.008

IF: 4.632

2020-01-01

Journal of Rare Earths

Abstract:A series of VOx/CeO2 catalysts were synthesized via vanadia supported on ceria with different BET surface areas. The catalysts were employed to investigate the active sites for the selective catalytic reduction of NO with NH3 (NH3-SCR). The kinetic results show that VOx/CeO2 catalysts exhibit nearly constant apparent activation energies (Ea), indicating the same SCR reaction mechanism. The V–O–Ce bridging modes and oligomeric VOx were identified and quantified by Raman, FT-IR and H2-TPR. The amounts of the V–O–Ce bridging modes calculated by H2-TPR are correlated to the NH3-SCR intrinsic reaction rates. The turnover frequencies (TOFs) show a constant value at the same temperature, which were calculated based on the number of V–O–Ce bridging modes of VOx/CeO2 catalysts. Therefore, it can be concluded that the V–O–Ce bridging modes are the active sites of VOx/CeO2 catalysts for the NH3-SCR reaction.
Structure–Activity Relationship of Titanate Nanotube-Confined Ceria Catalysts in Selective Catalytic Reduction of NO with Ammonia

Haiqiang Wang,Shuang Cao,Chaoping Cen,Xiongbo Chen,Zhongbiao Wu

DOI: https://doi.org/10.1007/s10562-013-1084-5

IF: 2.936

2013-01-01

Catalysis Letters

Abstract:A series of titanate nanotube-confined ceria catalysts with different Ce/Ti molar ratios were synthesized. The structure of ceria transformed in the following order: amorphous → small crystals → middle crystals → large crystals. Compared with ceria crystals, amorphous ceria with large quantities of surface defects showed better deNO x activity. Graphical Abstract
Morphology and Nanosize Effects of Ceria from Different Precursors on the Activity for NO Reduction

Lianjun Liu,Yuan Cao,Wenjing Sun,Zhijian Yao,Bin Liu,Fei Gao,Lin Dong

DOI: https://doi.org/10.1016/j.cattod.2011.04.018

IF: 5.3

2011-01-01

Catalysis Today

Abstract:The present work comparatively explored the morphology and size-dependent reduction and activity of CeO2 nanostructures for NO reduction. CeO2 nanorods were prepared by Ce(NO3)3, while spherical-like nanoparticles with an average size of 4–6nm were obtained from (NH4)2Ce(NO3)6 and Ce(SO4)2. As compared with CeO2 nanorods, these nanoparticles (4–6nm) showed the larger lattice strain and higher activity for NO reduction, which was due to the nanosize effect that significantly improved the intrinsic reducibility of surface oxygen and facilitated the formation of oxygen vacancies. In addition, the adsorption type and configuration of NO was similar over these different shaped ceria. However, CeO2 nanoparticles from tetravalent cerium showed the greater capacity to activate the adsorbed NO species than nanorods from the tervalent nitrates.
Morphology-Dependent Properties of MnOx/ZrO2–CeO2 Nanostructures for the Selective Catalytic Reduction of NO with NH3

Ruihua Gao,Dengsong Zhang,Phornphimon Maitarad,Liyi Shi,Thanyada Rungrotmongkol,Hongrui Li,Jianping Zhang,Weiguo Cao

DOI: https://doi.org/10.1021/jp400984z

2013-01-01

Abstract:The morphology effect of ZrO2-CeO2 on the performance of MnOx/ZrO2-CeO2 catalyst for the selective catalytic reduction of NO with ammonia was investigated. The catalytic tests showed that the MnOx/ZrO2-CeO2 nanorods achieved significantly higher NO conversions than the nanocubes and nanopolyhedra. The catalytic tests also showed that the MnOx/ZrO2-CeO2 nanorods achieved a significantly higher rate constant with respect to NO conversion than that of the nanocubes and nanopolyhedra. On the nanorods, the apparent activation energy is 25 kJ mol(-1,) which was much lower than the values of nanocubes and nanopolyhedra (42 and 43 kJ mol(-1)). The high resolution transmission electron microscopy showed that the nanorods predominately exposed {110} and {100} planes. It was demonstrated that the ZrO2-CeO2 nanorods had a strong interaction with MnOx species, which resulted in great superiority for the selective catalytic reduction of NO. The excellent catalytic activity of the MnOx/ZrO2-CeO2 nanorods should be attributed to the Mn4+ species, adsorbed surface oxygen and oxygen vacancies which are associated with their exposed {110} and {100} planes.
Synergy of vanadia and ceria in the reaction mechanism of low-temperature selective catalytic reduction of NOx by NH3

Wenshuo Hu,Renzhi Zou,Yi Dong,Shuo Zhang,Hao Song,Shaojun Liu,Chenghang Zheng,Isabella Nova,Enrico Tronconi,Xiang Gao

DOI: https://doi.org/10.1016/j.jcat.2020.08.002

IF: 7.3

2020-11-01

Journal of Catalysis

Abstract:Elucidation of redox mechanism is vital to develop highly active catalysts for selective catalytic reduction (SCR) of NOx. Here, we apply an integrated experimental and theoretical approach to investigate low-temperature SCR (LT-SCR) mechanism over VOx/CeO2, a model system containing industrially-relevant vanadia active-species and an eye-catching redox support, i.e. ceria, frequently documented in SCR studies. We show that NO oxidative activation to a gaseous nitrite-precursor intermediate, which was trapped by BaO/Al2O3 and further spectroscopically and computationally validated, serves as a key step in LT-SCR. This scheme involves paired contributions from vanadia and ceria, in which vanadium stabilizes at +5 while Ce3+/Ce4+ varies in the redox cascade, and coupling of V5+−OH and proximal Ce4+−O reduces the NO oxidative activation barrier. These findings progress the understanding of LT-SCR mechanism and deliver a specific perspective on the synergy of surface active-sites and supports, which are essential for the design of further improved SCR catalysts.

chemistry, physical,engineering, chemical
Effects of WOx Modification on the Activity, Adsorption and Redox Properties of CeO2 Catalyst for NOx Reduction with Ammonia

Ziran Ma,Duan Weng,Xiaodong Wu,Zhichun Si

DOI: https://doi.org/10.1016/s1001-0742(11)60925-x

2012-01-01

Abstract:A series of WO3/CeO2 (WO(x)/CeO2) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO2 support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH3-TPD, H2 temperature-programmed reduction (H2-TPR), NH3/NO oxidation and activity measurements for NO(x) reduction by NH3 (NH3-SCR). The results show that polytungstate (WO(x)) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO2 and WO(x). As a result, the N2 selectivity of NH3 oxidation and NH3-SCR at high temperatures (> 300 degrees C) is enhanced. Therefore, a wide working temperature window in which NO(x) conversion exceeds 80% (NO(x) conversion > 80%) from 200 to 450 degrees C, is achieved over 10 wt.% WO(x)/CeO2 catalyst. A tentative model of the NH3-SCR reaction route on WO(x)/CeO2 catalysts is presented.
Combination of Experimental and Theoretical Investigations of Mnox/Ce0.9zr0.1o2 Nanorods for Selective Catalytic Reduction of No with Ammonia

Phornphimon Maitarad,Dengsong Zhang,Ruihua Gao,Liyi Shi,Hongrui Li,Lei Huang,Thanyada Rungrotmongkol,Jianping Zhang

DOI: https://doi.org/10.1021/jp400504m

2013-01-01

Abstract:Manganese oxides (MnOx) supported on Ce0.9Zr0.1O2 (MnOx/Ce0.9Zr0.1O2) nanorods were synthesized and tested for low-temperature selective catalytic reduction of NO with ammonia. The catalysts were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photo-electron spectroscopy, and hydrogen temperature-programmed reduction. The structure and morphology results show that the MnOx was highly dispersed on the surface of Ce0.9Zr0.1O2 nanorods. Various species, such as Mn2+, Mn3+, and Mn4+, were exposed due to a strong interaction between manganese and cerium oxides. Thus, the MnOx/Ce0.9Zr0.1O2 nanorods exhibited a better catalytic performance (90% NO conversion at 150 degrees C) compared with that of the as-prepared Ce0.9Zr0.1O2 nanorods. Density functional theory (DFT) calculations clearly demonstrated that the MnOx on the surface of supporting nanorods or Mn@ CeO2(110) could easily form an oxygen vacancy distortion. Furthermore, the Mn@CeO2(110) Model in the DFT analysis showed a prominent effect on the NO and NH3 adsorption which resulted in a stronger nitrite intermediate (NOO*) formations and more attractive interaction with the NH3 gas compared with those observed, with the CeO2(110) model. Therefore, a thorough understanding of the structure and catalytic performance of MnOx/Ce0.9Zr0.1O2 nanorods was successfully achieved by a combination of experimental and theoretical studies.
CeO2 nanoparticles with oxygen vacancies decorated N-doped carbon nanorods: A highly efficient catalyst for nitrate electroreduction to ammonia

Zerong Li,Zhiqin Deng,Ling Ouyang,Xiaoya Fan,Longcheng Zhang,Shengjun Sun,Qian Liu,Abdulmohsen Ali Alshehri,Yonglan Luo,Qingquan Kong,Xuping Sun

DOI: https://doi.org/10.1007/s12274-022-4863-8

IF: 9.9

2022-10-01

Nano Research

Abstract:Electrocatalytic nitrate reduction reaction (NO 3 − RR) emerges as a highly efficient approach toward ammonia synthesis and degrading NO 3 − contaminant. In our study, CeO 2 nanoparticles with oxygen vacancies (V O ) decorated N-doped carbon nanorods on graphite paper (CeO 2− x @NC/GP) were demonstrated as a highly efficient NO 3 − RR electrocatalyst. The CeO 2− x @NC/GP catalyst manifests a significant NH 3 yield up to 712.75 μmol·h −1 cm −2 at −0.8 V vs. reversible hydrogen electrode (RHE) and remarkable Faradaic efficiency of 92.93% at −0.5 V vs. RHE under alkaline conditions, with excellent durability. Additionally, an assembled Zn-NO 3 − battery with CeO 2− x @NC/GP as cathode accomplishes a high-power density of 3.44 mWcm −2 and a large NH 3 yield of 145.08 μmol·h −1 cm −2 . Density functional theory results further expose the NO 3 − reduction mechanism on CeO 2 (111) surface with V O .

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Morphology and Crystal Plane Effects of Ceria Nanocrystals for Selective Catalytic Reduction of NO with NH 3

Ma Zhaoxia,Li Songda,Zhang Yongqi

DOI: https://doi.org/10.1007/s11664-021-08950-4

IF: 2.1

2021-01-01

Journal of Electronic Materials

Abstract:Nitrogen oxides (NO X ) are one of the major sources of air pollution and can cause serious environmental issues. Herein, a series of CeO 2 nanomaterials with different morphologies, such as nanorods, nanopolyhedrons, and spindles, have been designed and fabricated via a facile hydrothermal method as efficient catalysts for the selective catalytic reduction of NO X with NH 3 . The as-prepared catalysts were characterized by means of scanning electron microscopy, transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, Fourier transform infrared spectrometry, and temperature-programmed desorption. The high percentage of the exposed (100) plane, together with the small crystalline size of the CeO 2 nanorods, led to more oxygen absorbed on their surface, which accelerated the adsorption and activation of NO and NH 3 , and lowered the apparent activation energy. Therefore, CeO 2 nanorods exhibited the highest catalytic activity across the whole temperature range (150–450°C) and obtained 94% NO conversion at 450°C with high N 2 selectivity.
Different Exposed Facets VO /ceo2 Catalysts for the Selective Catalytic Reduction of NO with NH3

Tao Zhang,Huazhen Chang,Kezhi Li,Yue Peng,Xiang Li,Junhua Li

DOI: https://doi.org/10.1016/j.cej.2018.05.049

IF: 15.1

2018-01-01

Chemical Engineering Journal

Abstract:VOx/CeO2 catalysts, employing CeO2 nanocubes (NCs), nanorods (NRs), and nanopolyhedrons (NPs) with predominately exposed {100}, {110}, and {111} facets as the supports, were prepared by an incipient wetness impregnation method. The catalysts were used in the selective catalytic reduction (SCR) of NOx with NH3. The SCR performance showed that V-CeO2-NPs could achieve significantly higher NO conversion than V-CeO2-NCs and V-CeO2-NRs in the entire temperature range. The characterization results confirmed that the redox and acidic properties of VOx/CeO2 catalysts were closely related to the exposed facets of the CeO2 supports. The excellent SCR activity of V-CeO2-NPs should be attributed to its appropriate redox ability and abundant surface acid sites, which are associated with the predominately exposed {111} facets of CeO2-NPs.
Morphology and Crystal-Plane Effects of Nanoscale Ceria on the Activity of CuO/CeO2 for NO Reduction by CO

Lianjun Liu,Zhijian Yao,Yu Deng,Fei Gao,Bin Liu,Lin Dong

DOI: https://doi.org/10.1002/cctc.201000320

IF: 4.5

2011-01-01

ChemCatChem

Abstract:The present work elucidated the morphology and crystal-plane effects of nanoscale ceria on the activity of CuO/CeO2 catalysts toward NO reduction. CeO2 Nanopolyhedra were enclosed by (111) and (100) planes; the nanorods predominantly exposed (110) and (100) surfaces, and the nanocubes only showed the polar (100) planes. Moreover, the strongest interaction was between CuO and CeO2 rods, followed by CuO/CeO2 polyhedra, and the CuO/CeO2 cubes showed the least interaction. Importantly, Cu2+ ions could be incorporated into the pore and sur-face lattices by occupying the vacant sites in the nanostructure CeO2 rods. Partial copper oxide species were segregated on the surface of CeO2 cubes with larger particle sizes. As a result, the site geometry and coordination environment of Cu2+ ions were different on the (111), (110), and (100) surfaces of CeO2. This surface structure effect in turn led to a higher surface reducibility, activity and N-2 selectivity of CuO/CeO2 nanorods for NO reduction at low temperatures (below 250 degrees C); the polyhedra and cubes were less active.
Roles of Lewis and Brønsted Acid Sites in NO Reduction with Ammonia on CeO2-ZrO2-NiO-SO42− Catalyst

Si Zhichun,Weng Duan,Wu Xiaodong,Jiang Yang

DOI: https://doi.org/10.1016/s1002-0721(09)60189-7

IF: 4.632

2010-01-01

Journal of Rare Earths

Abstract:Nickel and sulfate co-modified CeO2-ZrO2 catalysts were prepared by sol-gel method. The catalysts were characterized by XRD, FTIR, XPS, NH3 chemisorption and NH3-SCR activity tests. The results showed that the enhanced acidity of CeO2-ZrO2 catalysts by nickel and sulfate co-modification was responsible for the broadened temperature window and improved the selectivity to N2 in NH3-SCR deNOx. The introduction of nickel to CeO2-ZrO2 solid solutions resulted in more Ce3+ on surface of catalyst, leading to an increased Lewis acidity of catalyst. Higher Lewis acidity of catalyst facilitated ammonia activation at low temperature (<300 °C) and thereby improved the NH3-SCR activity. The enhanced high-temperature (>300 °C) activity and selectivity of catalysts arose from the introduction of Brønsted acid sites (less oxidative than Lewis acid sites) by sulfate modification.
Preparation, Characterization, and Catalytic Performance of High Efficient CeO2-MnOx-Al2O3 Catalysts for NO Elimination

Xiaojiang Yao,Lulu Li,Weixin Zou,Shuohan Yu,Jibin An,Hongli Li,Fumo Yang,Lin Dong

DOI: https://doi.org/10.1016/s1872-2067(15)61098-1

2016-01-01

Abstract:A series of CeO2-MnOx-Al2O3 mixed oxide catalysts (Ce:Mn:Al mole ratio = 6:4:x, x = 0.25, 0.5, 1, 2) were prepared by a simple one-step inverse co-precipitation method to investigate the influence of the incorporation of Al3+ into CeO2-MnOx mixed oxides. CeO2-MnOx, CeO2-Al2O3, and MnOx-Al2O3 mixed oxides, and CeO2 were prepared by the same method for comparison. The samples were characterized by XRD, Raman, N2 physisorption, H2-TPR, XPS, and in situ DRIFTS. The catalytic reduction of NO by CO was chosen as a model reaction to evaluate the catalytic performance. The incorporation of a small amount of Al3+ into CeO2-MnOx mixed oxides resulted in a decrease of crystallite size, with the increase of the BET specific surface area and pore volume, as well as the increase of Ce3+ and Mn4+. The former benefits good contact between catalyst and reactants, and the latter promotes the adsorption of CO and the desorption, conversion and dissociation of adsorbed NO. All these enhanced the catalytic performance for the NO+CO model reaction. A reaction mechanism was proposed to explain the excellent catalytic performance of CeO2-MnOx-Al2O3 catalysts for NO reduction by CO.
Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO 2 –WO 3 /TiO 2 Catalysts for NO Abatement with NH 3

Yan Wang,Tong Shi,Qi-Yuan Fan,Yang Liu,Aiai Zhang,Zhaoqiang Li,Yanheng Hao,Lin Chen,Fenrong Liu,Xiaojun Gu,Shanghong Zeng

DOI: https://doi.org/10.1021/acscatal.2c01364

IF: 12.9

2022-06-30

ACS Catalysis

Abstract:Tricomponent cerium–tungsten–titanium catalysts have the potential for selective catalytic reduction of NO by NH3, while the accurate modulating of the surface structure and the understanding of the atomic-level mechanism remain extremely challenging. To resolve the conundrum, here, we investigate the modular ternary catalysts through advanced spectroscopic and computational studies. It reveals that the introduction of graphene oxide induces a high dispersion of W and Ce species, resulting in the generation of amorphous W–O–Ce- and Ce–O–Ti-bonding structures on the surface. More importantly, the high dispersion of CeO2 facilitates the formation of abundant oxygen vacancies, which are mobile active sites for adsorption and activation of NO and NH3. Temperature-programmed desorption of NO (NO-TPD) and temperature-programmed desorption of NH3 (NH3-TPD) validate the feasibility of adsorption of NO and NH3 at low temperatures. In situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy of the transient reaction indicates that both NO2 and monodentate nitrate are active intermediates, which can react with the adsorbed NH3 to generate N2 and H2O during catalysis. X-ray absorption fine structure (XAFS), in situ Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) provide direct evidence for the presence of Ce, W, and Ti interactions. Theoretical simulations prove that the inherent interactions reliably accelerate the conversion efficiency of NO x to N2 by improving the electron transfer on the surface. Furthermore, the Langmuir–Hinshelwood mechanism is thermodynamically more feasible and predominant over the graphene oxide-triggered catalyst.

chemistry, physical
Ce1-xFexVO4 with Improved Activity for Catalytic Reduction of NO with NH3

Li Wang,Junbo Wang,Heping Cheng,Xiangxiang Zhou,Zhen Ma

DOI: https://doi.org/10.3390/catal12050549

IF: 3.9

2022-01-01

Catalysts

Abstract:A series of Ce1-xFexVO4 (x = 0, 0.25, 0.50, 0.75, 1) catalysts prepared by modified hydrothermal synthesis were used for selective catalytic reduction (SCR) of NOx with NH3. Among them, Ce0.5Fe0.5VO4 showed the highest catalytic activity. The catalysts were characterized by X-ray diffraction (XRD), N-2 adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray fluorescence (XRF), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction using H-2 (H-2-TPR), and temperature-programmed desorption of NH3 (NH3-TPD). The results indicated the formation of Ce-Fe-V-O solid solutions. The average oxidation states (AOS) of Ce, Fe, V, and O atoms changed obviously with the incorporation of Fe3+ into CeVO4, and the acidity of Ce0.5Fe0.5VO4 differs from that of CeVO4 and FeVO4. The presence of more acid sites and a sharp increase in active oxygen species in Ce0.5Fe0.5VO4 effectively improved the selective catalytic reduction (SCR) activity.
Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO2-WO3/TiO2 Catalysts for NO Abatement with NH3

Yan Wang,Tong Shi,Qi-Yuan Fan,Yang Liu,Aiai Zhang,Zhaoqiang Li,Yanheng Hao,Lin Chen,Fenrong Liu,Xiaojun Gu,Shanghong Zeng

DOI: https://doi.org/10.1021/acscatal.2c01364

IF: 12.9

2022-01-01

ACS Catalysis

Abstract:Tricomponent cerium-tungsten-titanium catalysts have the potential for selective catalytic reduction of NO by NH3, while the accurate modulating of the surface structure and the understanding of the atomic-level mechanism remain extremely challenging. To resolve the conundrum, here, we investigate the modular ternary catalysts through advanced spectroscopic and computational studies. It reveals that the introduction of graphene oxide induces a high dispersion of W and Ce species, resulting in the generation of amorphous W-O-Ce. and Ce-O-Ti-bonding structures on the surface. More importantly, the high dispersion of CeO2 facilitates the formation of abundant oxygen vacancies, which are mobile active sites for adsorption and activation of NO and NH3. Temperature-programmed desorption of NO (NO-TPD) and temperature-programmed desorption of NH3 (NH3-TPD) validate the feasibility of adsorption of NO and NH3 at low temperatures. In situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy of the transient reaction indicates that both NO2 and monodentate nitrate are active intermediates, which can react with the adsorbed NH3 to generate N-2 and H2O during catalysis. X-ray absorption fine structure (XAFS), in situ Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) provide direct evidence for the presence of Ce, W, and Ti interactions. Theoretical simulations prove that the inherent interactions reliably accelerate the conversion efficiency of NOx to N-2 by improving the electron transfer on the surface. Furthermore, the Langmuir-Hinshelwood mechanism is thermodynamically more feasible and predominant over the graphene oxide-triggered catalyst.
Understanding Structure-Performance Relationships of CoOx/CeO2 Catalysts for NO Catalytic Oxidation: Facet Tailoring and Bimetallic Interface Designing.

Xiaomin Cheng,Yiqi Liu,Lubin Yang,Mingjie Yang,Yongzheng Zhang,Cheng Ma,Xuan Meng,Jing Xu,Jitong Wang,Wenming Qiao

DOI: https://doi.org/10.1016/j.jhazmat.2023.131144

IF: 13.6

2023-01-01

Journal of Hazardous Materials

Abstract:Crystalline structure and bimetallic interaction of metal oxides are essential factors to determine the catalytic activity. Herein, three different CoOx/CeO2 catalysts, employing CeO2 nanorods (predominately exposed {110 facet), CeO2 nanopolyhedra ({111} facet) and CeO2 nanocubes ({100} facet) as the supports, are successfully prepared for investigating the effect of exposed crystal facets and bimetallic interface interaction on NO oxidation. In comparison with the {111} and {100} facets, the exposed crystal facet {110} exists the best superiority to anchor and stabilize Co species. Moreover, ultra-small CoOx clusters composed of strong Co-O coordination shells with minor Co-O-Ce interaction are formed and uniformly dispersed on the CeO2 nanorods. Structural characterizations reveal that the active exposed crystal facet {110} and the strong bimetallic interface interaction in CoOx/CeO2-nanorods (R-CC) result in more structural defect, endowing it with abundant oxygen vacancies, excellent reducibility and strong adsorption capacity. The DRIFTs spectra further indicate that the exposed crystal facet {110} has a significant promoting effect on the strength of nitrates compared with {111} and {100} facets. The bimetallic interface interaction not only significantly facilitates the formation of nitrate species at lower temperature, but also effectively suppresses the generation of sulfate and lower the sulphation rate. Therefore, R-CC catalyst exhibits the maximum NO oxidation activity with the conversion of 86.4 % at 300 °C and still sustains its high activity under cyclic condition or 50 ppm SO2. The provided crystalline structure and interaction-enhanced strategy sheds light on the design of high-activity NO oxidation catalysts.
Engineering the surface properties of CeVO4 catalysts to improve low temperature De-NO performance through regulating pH value in synthesis process

Yingying Li,Zhiping Zhang,Tianrui Zhang,Qingyun Jiang,Xiaoyu Niu,Yujun Zhu

DOI: https://doi.org/10.1016/j.fuel.2023.130836

IF: 7.4

2024-04-01

Fuel

Abstract:The presence of quick electron transfer in metal oxides can well promote selective catalytic reduction (SCR) of NOx with NH3. Here, a series of CeVO4-X (X = 4, 6, 8, 10 and 12) catalysts with engineering the surface properties were successfully synthesized via controlling pH values in the hydrothermal process. The catalysts were evaluated in the NH3-SCR reaction in the temperature range of 90–420 °C. Among them, the CeVO4-8 catalyst with nanorods structure displayed the highest catalytic activity, achieving over 90 % NO conversion between 180 and 390 °C. It also showed high N2 selectivity and good tolerance to H2O and SO2. The effect of different pH values on the catalytic activity and microstructure of CeVO4 catalysts was comprehensively characterized using various techniques such as XRD, Raman, SEM, HR-TEM, N2 adsorption-desorption, H2-TPR, O2/NH3/NO-TPD, XPS, and in-situ DRIFTS. The characterization results revealed that the variation in catalytic activity among these catalysts is attributed to the difference in their surface properties, which were tuned by changing the pH values during synthesis process, despite having the same crystal phase of CeVO4. The superior catalytic performance of the CeVO4-8 catalyst, particularly at low temperature, can be attributed to its higher specific surface area, enhanced acidity, and the electron transfer between cerium and vanadium species (Ce4+ + V4+ ↔ Ce3+ + V5+), consequently resulting in increased redox capacity and facilitating the adsorption and activation of NH3 and NO molecules. This study broadens the applications of CeVO4 in the field of low temperature NOx removal.

energy & fuels,engineering, chemical

Structure-activity relationship of VOx/CeO2 nanorod for NO removal with ammonia

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

High-Performance Strategy and Degradation Mechanism of Cezrvox Catalysts for Nox Reduction

New Insights into the Role of Vanadia Species As Active Sites for Selective Catalytic Reduction of NO with Ammonia over VOx/CeO2 Catalysts

Structure–Activity Relationship of Titanate Nanotube-Confined Ceria Catalysts in Selective Catalytic Reduction of NO with Ammonia

Morphology and Nanosize Effects of Ceria from Different Precursors on the Activity for NO Reduction

Morphology-Dependent Properties of MnOx/ZrO2–CeO2 Nanostructures for the Selective Catalytic Reduction of NO with NH3

Synergy of vanadia and ceria in the reaction mechanism of low-temperature selective catalytic reduction of NOx by NH3

Effects of WOx Modification on the Activity, Adsorption and Redox Properties of CeO2 Catalyst for NOx Reduction with Ammonia

Combination of Experimental and Theoretical Investigations of Mnox/Ce0.9zr0.1o2 Nanorods for Selective Catalytic Reduction of No with Ammonia

CeO2 nanoparticles with oxygen vacancies decorated N-doped carbon nanorods: A highly efficient catalyst for nitrate electroreduction to ammonia

Morphology and Crystal Plane Effects of Ceria Nanocrystals for Selective Catalytic Reduction of NO with NH 3

Different Exposed Facets VO /ceo2 Catalysts for the Selective Catalytic Reduction of NO with NH3

Morphology and Crystal-Plane Effects of Nanoscale Ceria on the Activity of CuO/CeO2 for NO Reduction by CO

Roles of Lewis and Brønsted Acid Sites in NO Reduction with Ammonia on CeO2-ZrO2-NiO-SO42− Catalyst

Preparation, Characterization, and Catalytic Performance of High Efficient CeO2-MnOx-Al2O3 Catalysts for NO Elimination

Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO 2 –WO 3 /TiO 2 Catalysts for NO Abatement with NH 3

Ce1-xFexVO4 with Improved Activity for Catalytic Reduction of NO with NH3

Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO2-WO3/TiO2 Catalysts for NO Abatement with NH3

Understanding Structure-Performance Relationships of CoOx/CeO2 Catalysts for NO Catalytic Oxidation: Facet Tailoring and Bimetallic Interface Designing.

Engineering the surface properties of CeVO4 catalysts to improve low temperature De-NO performance through regulating pH value in synthesis process