Abstract:Selective catalytic reduction (SCR) reduces oxynitrides from power plant and vehicle emissions, and enhancements in efficiency would lessen pollution further. We prepared a series of transition metal (TM) doped CeO2 catalysts by impregnating them with vermiculite (VMT) as a carrier for reducing NOx by SCR with carbon monoxide (CO–SCR). The catalyst performance was in the following order: Zn < Cr < Fe < no dopant < Mn < Ni < Co < Cu. In other words, Mn, Ni, Co, and Cu greatly promoted NO conversion compared with Ce/VMT alone, whereas Zn, Cr, and Fe dopants hindered NO conversion. We applied density functional theory (DFT) by structural optimization and potential configuration analyses of CeO2 (1 1 1) and TM–CeO2 (1 1 1), which enabled us to propose the reaction pathway and the potential energy distribution of the transition state. Our DFT analyses are in accordance with the sequence of the NO + CO reaction. The performance of the Cu catalyst was superior to the others. The CeO2 (1 1 1) lattice plane is primarily in the cerium species, whereas the Cu–O–Ce interface forms in two phases, which indicates a complex interplay between the copper and cerium. Furthermore, the catalyst has numerous surface oxygen vacancies (Ovs) and active *O species, and exhibits an impressive reduction capacity: the NO conversion reaches 100% with a gas hourly space velocity of 102,000 h−1 at 300 °C. The CO–SCR reaction pathway on the Cu–CeO2 (1 1 1) surface is as follows: R1: CO + Olattice → Ov; R2: 2NO → *ONNO → N2O + *O; R3: N2O → N2 + *O; R4: *O + CO → CO2; R5: *O + Ov → Olattice. The synergy of the dopants on the CeO2 (1 1 1) surface modulated the distribution of active centers in the catalyst, which in turn modulated the catalyst performance. Our research will be useful for flue gas remediation.

Morphology effects in MnCeOx solid solution-catalyzed NO reduction with CO: Active sites, water tolerance, and reaction pathway

Morphology-Dependent Properties of MnOx/ZrO2–CeO2 Nanostructures for the Selective Catalytic Reduction of NO with NH3

Mn-modified Near-Surface Atomic Structure of CeO2 Nanorods for Promoting Catalytic Oxidation of Auto-Exhaust Carbon Particles

Morphology and Crystal-Plane Effects of Nanoscale Ceria on the Activity of CuO/CeO2 for NO Reduction by CO

Co-Precipitated Mn0.15Ce0.85O2−δ Catalysts for NO Oxidation: Manganese Precursors and Mn-Ce Interactions

Synthesis of mixed Mn–Ce–Ox one dimensional nanostructures and their catalytic activity for CO oxidation

Effect of MnO(x) Modification on the Activity and Adsorption of CuO/Ce(0.67)Zr(0.33)O(2) Catalyst for NO Reduction.

Catalytically active ceria-supported cobalt-manganese oxide nanocatalysts for oxidation of carbon monoxide.

Morphology and Nanosize Effects of Ceria from Different Precursors on the Activity for NO Reduction

Mn-modified near-surface atomic structure of CeO 2 nanorods for promoting catalytic oxidation of auto-exhaust carbon particles

Synergetic Promotional Effects Between Cerium Oxides and Manganese Oxides for Nh3-Selective Catalyst Reduction over Ce-Mn/Tio2

Preparation, Characterization, and Catalytic Performance of High Efficient CeO2-MnOx-Al2O3 Catalysts for NO Elimination

Morphology dependence of catalytic properties of Ni/CeO 2 for CO 2 methanation: A kinetic and mechanism study

Synthesis of CeO2–MnOx Mixed Oxides and Catalytic Performance under Oxygen-Rich Condition

Low-temperature catalytic oxidation of NO over Mn-Ce-Ox catalyst

Mn‐Fe‐Ce Coating Onto Cordierite Monoliths As Structured Catalysts for NO Catalytic Oxidation

Insight into structure defects and catalytic mechanism for NO oxidation over Ce0.6Mn0.4Ox solid solutions catalysts: Effect of manganese precursors

Transition-metal‐doped ceria carried on two-dimensional vermiculite for selective catalytic reduction of NO with CO: Experiments and density functional theory

Ceria-Promoted and Stabilized Copper and Iron Oxides Cooperatively Catalyze NO Efficient Degradation by CO

Correlation of Physicochemical Characteristics of CoOx Supported by a CeO2 Nanorod with NO Removal by CO

Influence of MnO2 modification methods on the catalytic performance of CuO/CeO2 for NO reduction by CO