Abstract:This paper is focused on a dual-loop current control method (grid current loop and fundamental current loop) for digitally controlled LCL-type shunt active power filters (APFs). Normally, a proportional-resonant (PR) unit is used as the fundamental current controller, where the proportional part of PR unit actually serves as the proportional feedback of inverter-side current and provides a certain degree of damping for LCL resonance. However, its valid damping region is only up to one-sixth of the sampling frequency (fs/6), which leads to less robustness to the grid impedance. To address this issue, a delay-compensation control link is proposed in this paper to replace the proportional part of the PR fundamental current controller and widen the effective damping region. As a result, the system robustness is improved without adding extra sensors or introducing an extra active damping loop. Theoretical analysis proves that it can obtain a wider damping region of (0, fs/4). Moreover, a systematic controller parameter design criterion is studied. In particular, a numerical optimization algorithm is developed to optimize damping property, and a design method based on root locus plot and Bode diagram is presented to enhance harmonic compensation accuracy. Finally, experimental results implemented on a 30 kVA APF prototype have validated the feasibility of the proposed current controller and parameter design criterion.

Application of adaptive control based on hyperstability theory in single-phase active power filter

Application of repetitive control for APF

Research on PI and Repetitive Control Strategy for Shunt Active Power Filter with LCL-filter

Current Control of LCL-Type Shunt APFs: Damping Characteristics, Stability Analysis, and Robust Design Against Grid Impedance Variation

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

A Robust Dual-Loop Current Control Method with a Delay-Compensation Control Link for LCL-Type Shunt Active Power Filters

High precision compensation for high power Hybrid Active Power Filter based on repetitive control algorithm

A Novel Control Approach for LCL-based Shunt Active Power Filter with High Dynamic and Steady-State Performance

Fuzzy Control and Lyapunov-based Stability Control of the Three-phase Shunt Active Power Filter

Control Strategy of Active Power Filter Based on State Space

Active Power Filter for Harmonie Compensation Using a Digital Dual-Mode-structure Repetitive Control Approach

Takagi-Sugeno fuzzy control and Lyapunov-based stability control of the single-phase shunt active power filter

A simple method of realization of low power loss and high compensation-precision active power filter

Control Strategy for Shunt Active Power Filters with High Compensation Precision

Modified Modeling And System Stabilization Of Shunt Active Power Filter Compensating Loads With F Capacitance

Improved Modeling, Stability Analysis and Resonance Suppression of APF System

Current Loop Control Approach for LCL-based Shunt Active Power Filter

Dual-repetitive Control Algorithm for Three-Phase Shunt Active Power Filters

Switched Current Tracking and Optimization of Active Power Filters

Design and implementation of compound current control strategy for improved LCL-based Shunt Active Power Filter

Shunt APF Control Strategy Based on Multiple Synchronous Rotating Transform