Abstract:The performance of Al-0.1Sn-0.1In-0.05Ga alloys as anodes for Al–air batteries is investigated for low carbon development needs. Low melting point elemental metals were added to high purity Al (99.9999 %) using micro alloying, either in a diffuse distribution or as a second phase, depending on their solid solubility in the Al. The correlation between the microstructure and electrochemical properties of Al-0.1Sn-0.1In-0.05Ga alloys was established. The experiments were conducted in a 4.0 mol/l NaOH solution. The electrochemical characteristics of the Al-0.1Sn-0.1In-0.05Ga anodes were assessed by using potentiodynamic polarization, electrochemical impedance spectroscopy, and galvanostatic discharge experiments. It is indicated that the inclusion of Sn, In, and Ga elements results in improved corrosion resistance and discharge activity in the anode composed of Al. This can be attributed to the presence of nano-scale second phase particles and a uniform microstructure in the Al-0.1Sn-0.1In-0.05Ga alloy, which effectively inhibits localized crystallographic corrosion. In comparison to pure Al, the Al-0.1Sn-0.1In-0.05Ga alloy exhibits a reduction in corrosion current density by 24.77 % and an increase in anode efficiency by 40 %. When discharged at a current density of 10 mA/cm 2 , an Al–air battery with an Al-0.1Sn-0.1In-0.05Ga anode exhibits a discharge voltage of 1.523 V, a discharge capacity of 2214 Ah/kg, and an anode efficiency of 74.31 %. The research has the potential to advance Al–air batteries' progress and significantly contribute to global sustainability efforts.

Performance of Al–0.5 Mg–0.02 Ga–0.1 Sn–0.5 Mn As Anode for Al–air Battery in NaCl Solutions

Performance of Al−1Mg−1Zn−0.1Ga−0.1Sn As Anode for Al-air Battery

Electrochemical Performances of Al–0.5Mg–0.1Sn–0.02In Alloy in Different Solutions for Al–air Battery

Performance of Al-0.6 Mg-0.05 Ga-0.1 Sn- 0.1 In as Anode for Al-Air Battery in KOH Electrolytes

Performance of Al-0.5In As Anode for Al–Air Battery in Inhibited Alkaline Solutions

Performance of Al-Air Batteries Based on Al–Ga, Al–In and Al–Sn Alloy Electrodes

Electrochemical Performance of Al-1Zn-0.1In-0.1Sn-0.5Mg-xMn (x = 0, 0.1, 0.2, 0.3) Alloys Used as the Anode of an Al-Air Battery

Electrochemical Performance of Pure Al, Al–Sn, Al–Mg and Al–Mg–Sn Anodes for Al-air Batteries

Discharge performance of Al-0.1Sn-0.1In-0.05Ga alloy for Al–air battery anodes

Effect of Ga on Microstructure and Electrochemical Performance of Al–0.4Mg–0.05Sn–0.03Hg Alloy As Anode for Al–air Batteries

Performance of Mg–9Al–1In Alloy As Anodes for Mg-Air Batteries in 3.5 Wt% NaCl Solutions

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Performance of Anodes with Proper Active Metal Elements Added to the Al-0.16wt%In in Alkaline Electrolyte for Al-Air Batteries

Electrochemical Performance of Mg-3Al Modified with Ga, in and Sn As Anodes for Mg-Air Battery

Discharge performance of the Al–Mg–Sn alloy anodes with different Sn content for Al-air batteries

Corrosion and Discharge Behaviors of Al-Mg-Sn-Ga-In in Different Solutions

Enhancing the Electrochemical Performance of Al-Mg-Sn-Ga Alloy Anode for Al-Air Battery by Solution Treatment

Electrochemical Behavior of Al-1.5Mg-0.05Sn-0.01Ga Alloy in KOH Ethanol-Water Solutions for Al-Air Battery

Performance of Fine Structured Aluminum Anodes in Neutral and Alkaline Electrolytes for Al-air Batteries

Influence Of Rolling Processing On Discharge Performance Of Al-0.5mg-0.1sn-0.05ga-0.05in Alloy As Anode For Al-Air Battery

Evaluation of an Alkaline Electrolyte System for Al-Air Battery