Abstract:Rechargeable lithium–air (or lithium–oxygen) batteries have generated a great deal of attention due to their ultrahigh theoretical gravimetric energy density outperforming the conventional lithium-ion batteries. Despite its great promise, many obstacles [1] need to be solved before its practical application, such as low round-trip efficiency, poor catalytic capability and inferior cyclability, mainly caused by their sluggish kinetics. Apparently, to improve this kinetics, a rational design of electrocatalysts toward improving oxygen reduction reaction (ORR, during discharge) and oxygen evolution reaction (OER, during charging) must be devised. Common cathodes used in the previous literature are carbon supported oxygen diffusion electrodes, and the general preparation process is the catalysts mixed with a certain amount of binder into carbon materials, pasting them onto the current collectors. Nevertheless, both carbon materials and organic binders [2] have been suggested degrading in Li-air batteries. Therefore, there is a critical need to find a new catalyst support to substitute carbon and develop a binder-free cathode preparation strategy for Li-air batteries. Inspired by the ultrathin nanostructure of graphene carbon materials, two-dimensional (2D) layered molybdenum disulfide (MoS 2 ) can be exfoliated to give single- or few layer nanosheets with much more exposed edges possesses high electrocatalytic activity. In this work, we prepared a novel cathode catalyst by growing TiN nanorods on commercially available carbon paper first, followed by growing MoS 2 nansheets on the TiN nanorods to form a core-shell structure materials (see in Fig. 1), and used directly it as a free-standing and binder-free air cathodes materials for the Li-O 2 batteries. The TiN nanorods arrays with excellent mechanical strength and also provide fast transport paths for the electrons and lithium ion. Furthermore, few-layer MoS 2 nanosheets offered high electrode/electrolyte/oxygen interfacial contact areas, promoted rapid charge transfer and offered amount of storage space for the discharged product. The Li-O 2 batteries with the TiN@MoS 2 /carbon paper electrode exhibits superior ORR/OER activity with a lower discharge-charge (the first cycle) overpotential of 840 mV than that the cells with the TiN/carbon paper cathode, and a 1100 mV lower overpotential than when a TiO 2 /carbon paper electrode was used (see in Fig. 2). Figure 1. (a) XRD patterns of the as-prepared various electrode materials; (b, c) SEM images of the as-prepared freestanding TiN@MoS 2 /carbon paper electrode; (d, e) TEM images of TiN@MoS 2 catalyst (inset A and B are SAED patterns of TiN@MoS 2 catalyst). Figure 2. Charge-discharge curves of Li/O 2 batteries with the as-prepared various air cathodes at a current density of 100 mAg -1 catalyst (the specific capacity is calculated based on the mass of MoS 2 catalyst in the air electrodes). Reference [1] J. Lu, L. Li, J. B. Park, Y. K. Sun, F. Wu and K. Amine, Chem Rev 2014 , 114 , 5611-5640. [2] C. V. Amanchukwu, J. R. Harding, Y. Shao-Horn and P. T. Hammond, Chemistry of Materials 2015 , 27 , 550-561. Figure 1

High Capacity Na–O2 Batteries with Carbon Nanotube Paper As Binder-Free Air Cathode

Engineering Capacitive Contribution in Nitrogen-Doped Carbon Nanofiber Films Enabling High Performance Sodium Storage

Enabling Highly Stable Li–O2 Batteries with Full Discharge–Charge Capability: the Porous Binder- and Carbon-Free IrNi Nanosheet Cathode

Multi-walled Carbon Nanotube Papers As Binder-Free Cathodes for Large Capacity and Reversible Non-Aqueous Li–O2 Batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

A Tough Flexible Cellulose Nanofiber Air Cathode for Oxygen Reduction Reaction with Silver Nanoparticles and Carbon Nanotubes in Rechargeable Zinc-Air Batteries

Binder-Free Nitrogen-Doped Carbon Nanotubes Electrodes for Lithium-Oxygen Batteries

High-Capacity Sodium Peroxide Based Na–O2 Batteries with Low Charge Overpotential via a Nanostructured Catalytic Cathode

Controllable Synthesis of Co@CoOx/Helical Nitrogen-Doped Carbon Nanotubes Toward Oxygen Reduction Reaction As Binder-free Cathodes for Al-Air Batteries

Peanut Shaped MnCo2O4 Winded by Multi-Walled Carbon Nanotubes As an Efficient Cathode Catalyst for Li-O-2 Batteries

Orthogonal-Channel, Low-Tortuosity Carbon Nanotube Platforms for High-Performance Li-O2 Batteries

High-Energy Density Li-O2 Battery with a Polymer Electrolyte-Coated CNT Electrode via the Layer-by-Layer Method

Cobalt-decorated carbon nanofibers as a low overpotential cathode for nonaqueous Na-CO2 batteries

Depolarized and Fully Active Cathode Based on Li(Ni0.5co0.2mn0.3)O-2 Embedded in Carbon Nanotube Network for Advanced Batteries

Enhanced Performance of Li-O 2 Batteries with MoS 2 Nanosheet-Coated TiN Nanorods Arrays Grown on Carbon Paper As Binder-Free Cathodes

Superior-capacity Binder-Free Anode Electrode for Lithium-Ion Batteries: CoxMny NizO Nanosheets with Metal/oxygen Vacancies Directly Formed on Cu Foil

Ultrathin Co3O4 Nanosheet Clusters Anchored on Nitrogen Doped Carbon Nanotubes/3d Graphene As Binder-Free Cathodes for Al-air Battery

Oxygen-Defect Enhanced Anion Adsorption Energy Toward Super-Rate and Durable Cathode for Ni–Zn Batteries

Double-Nanocarbon Synergistically Modified Na3V2(PO4)3: an Advanced Cathode for High-Rate and Long-Life Sodium-Ion Batteries.

Free-Standing Sandwich-Structured Flexible Film Electrode Composed of Na2Ti3O7 Nanowires@CNT and Reduced Graphene Oxide for Advanced Sodium-Ion Batteries

Carbon-free (co, Mn)3O4 Nanowires@ni Electrodes for Lithium-Oxygen Batteries.