Abstract:Recently, aluminum–air batteries have attracted great interest owing to their high output energy density, low cost, and feasibility to store and transport Al metal. However, the commercial application is still hindered by the lack of a high-performance air cathode, where the oxygen reduction reaction (ORR) happens, requiring fast charge transfer and mass transport at the catalyst–electrolyte–air interface. Herein, we report an aerophilic air cathode featuring both high intrinsic catalytic activity and large three-phase interface to facilitate air transport, which is prepared by growing cobalt-embedded and nitrogen-doped carbon nanotube (CoNCNT) arrays on carbon fiber paper and then modifying surface wettability with polytetrafluoroethylene solution. The optimized air electrode during the ORR shows a high onset potential of 0.95 V and fast current increase of 342.96 mA cm<sup>–2</sup> V<sup>–1</sup>, which is comparable to the commercial 20 wt % Pt/C, and has even better stability under the same conditions. Moreover, the aluminum–air battery with the aerophilic air electrode is superior to the battery with a commercial Pt/C electrode or aerophobic electrode in terms of maximum power density and long discharging durability. Bubble behavior measurement shows that aerobic wettability plays an important role in gas transport, thus controlling ORR efficiency of the air electrode. The concept of the gas-wettable electrode proves to be effective in the enhancement of oxygen reduction kinetics and would be also adapted in other gas-involved electrodes for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00837</a>.Elemental mapping images and C 1s XPS spectrum of CoNCNTs/CP; basic bubble contact angle results on different PTFE-modified CoNCNTs/CP; ORR polarization curves under different conditions and K-L plots of 0.8-CoNCNTs, Pt/C and CoNCNTs; CV curves at different scan rates of 0.8-CoNCNTs/CP, Pt/C, and CoNCNTs/CP; electrolyte droplet contact angles on 0.8-CoNCNTs/CP after the long-term reaction; optical pictures of the self-assembled Al–air battery; possible application demonstration; and table of relative atomic contents in CoNCNTs/CP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00837/suppl_file/am1c00837_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Controllable Synthesis of Co@CoOx/Helical Nitrogen-Doped Carbon Nanotubes Toward Oxygen Reduction Reaction As Binder-free Cathodes for Al-Air Batteries

Ultrathin Co3O4 Nanosheet Clusters Anchored on Nitrogen Doped Carbon Nanotubes/3d Graphene As Binder-Free Cathodes for Al-air Battery

Space-confined Synthesis of CoNi Nanoalloy in N-doped Porous Carbon Frameworks As Efficient Oxygen Reduction Catalyst for Neutral and Alkaline Aluminum-Air Batteries

Integrated and Binder‐Free Air Cathodes of Co3Fe7 Nanoalloy and Co5.47N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Integrated and Binder‐Free Air Cathodes of Co 3 Fe 7 Nanoalloy and Co 5.47 N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Three-dimensional Composite Catalysts for Al-O2 Batteries Composed of CoMn2O4 Nanoneedles Supported on Nitrogen-Doped Carbon Nanotubes/Graphene.

Aerophilic Co-Embedded N-Doped Carbon Nanotube Arrays as Highly Efficient Cathodes for Aluminum–Air Batteries

Preparation of Co–N Carbon Nanosheet Oxygen Electrode Catalyst by Controlled Crystallization of Cobalt Salt Precursors for All-Solid-state Al–air Battery

N,S-Codoped hierarchical porous carbon spheres embedded with cobalt nanoparticles as efficient bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries

Carbon nanotube-encapsulated Co/Co3Fe7 heterojunctions as a highly-efficient bifunctional electrocatalyst for rechargeable zinc-air batteries

Cobalt Nanoparticles Encapsulated in Nitrogen-Doped Carbon Nanotube as Bifunctional-Catalyst for Rechargeable Zn-Air Batteries

Synthesis of Cobalt-Anchored N-doped Carbon As an Oxygen Reduction Reaction Catalyst for Aluminum-Air Batteries

Efficient Oxygen Reduction and Evolution on 3D Fe/N Co‐doped Carbon Nanosheet‐nanotube Composites with Carbonaceous Heterostructure Via In‐situ Growth of Carbon Nanotubes

Facile synthesis of CO/N-doped carbon nanotubes and the application in alkaline and neutral metal-air batteries

Co single atoms and nanoparticles dispersed on N-doped carbon nanotube as high-performance catalysts for Zn-air batteries

Hierarchical Porous Manganese- and Nitrogen-Codoped Carbon Nanosheets Derived from Surface Modified Biomass as Efficient Oxygen Reduction Catalysts for Al-Air Batteries

Protruding N-doped carbon nanotubes on elongated hexagonal Co-N-C nanoplates as bifunctional oxygen electrocatalysts for Zn-air batteries

In situ growing N and O co-doped helical carbon nanotubes encapsulated with CoFe alloy as tri-functional electrocatalyst applied in Zn-Air Batteries driving Water Splitting

N-Doped Carbon Nanosheet Networks with Favorable Active Sites Triggered by Metal Nanoparticles As Bifunctional Oxygen Electrocatalysts

S, N Co-Doped Carbon Nanotube Encased Co NPs As Efficient Bifunctional Oxygen Electrocatalysts for Zinc-Air Batteries

Design of Fe and Cu bimetallic integration on Nitrogen-containing microporous graphene-like carbon via a hard-template-assisted strategy as an oxygen reduction catalyst for Al-air batteries