Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Engineering Capacitive Contribution in Nitrogen-Doped Carbon Nanofiber Films Enabling High Performance Sodium Storage

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Low‐temperature carbonized nitrogen doped hard carbon nanofiber towards high‐performance sodium‐ion capacitors

Understanding the Charge Storage Mechanism to Achieve High Capacity and Fast Ion Storage in Sodium‐Ion Capacitor Anodes by Using Electrospun Nitrogen‐Doped Carbon Fibers

Developing an oxygen-induced capacitive hard carbon anode for fast sodium ion storage through pore-scale engineering

Enhancing capacitive storage of carbonaceous anode by surface doping and structural modulation for high-performance sodium-ion battery

A Flexible Sulfur-Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage.

Enhanced surface capacitive sodium storage by pores regulation in carbon/carbon composite nanofibers

Nitrogen‐Doped Porous Carbon Nanosheets with Ultrahigh Capacity and Quasicapacitive Energy Storage Performance for Lithium and Sodium Storage Applications

Improving the electronegativity of N-doped carbon by encapsulating CoFe alloy clusters with a chainmail-like structure for high-energy sodium-ion capacitors

Nitrogen-doped 3D nanocarbon with nanopore defects as high-capacity and stable anode materials for sodium/lithium-ion batteries

Heteroatom doping and activation of carbon nanofibers enabling ultrafast and stable sodium storage

Flexible carbon nanofibers with multichannel and porous structure as freestanding anode for excellent sodium storage

Boosting High‐Rate Sodium Storage Performance of N‐Doped Carbon‐Encapsulated Na <sub>3</sub> V <sub>2</sub> (PO <sub>4</sub> ) <sub>3</sub> Nanoparticles Anchoring on Carbon Cloth

Nitrogen-doped porous carbon nanofoams with enhanced electrochemical kinetics for superior sodium-ion capacitor

In Situ Construction of Nitrogen-Doped and Zinc-Confined Microporous Carbon Enabling Efficient Na+-Storage Abilities

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

High Capacity and Superior Rate Performances Coexisting in Carbon-Based Sodium-Ion Battery Anode

Boosting High-Rate Sodium Storage Performance of N-Doped Carbon-Encapsulated Na3 V2 (PO4 )3 Nanoparticles Anchoring on Carbon Cloth.

Novel Structural Design and Adsorption/Insertion Coordinating Quasi‐Metallic Na Storage Mechanism toward High‐performance Hard Carbon Anode Derived from Carboxymethyl Cellulose

Template‐Induced Graphitic Nanodomains in Nitrogen‐Doped Carbons Enable High‐Performance Sodium‐Ion Capacitors