Abstract:HCCI (Homogeneous Charge Compression Ignition) combustion has the potential to significantly reduce NOx and PM emission of diesel engines due to its nature of even mixture and low temperature combustion. This combustion mode is only applicable in part load and low speed area so far. This range limitation results in frequently combustion mode switching from HCCI to CI and vice versa in real applications. HCCI realized by late injection with heavy EGR rate is investigated, which is also named PCCI (Premixed Charged Compression Ignition) sometimes. By changing control parameters (including injection timing, injection pressure and EGR rate) individually, the influences of these parameters on HCCI combustion and emissions are identified. Based on the evaluation of the influences, one pre-defined step-by-step air-fuel coordination strategy is presented. Additionally one hysteresis combustion mode determination method is proposed to avoid target mode fluctuation due to variation of engine speed or engine load in a small range. Torque deficiency occurs in acceleration transients as a result of fuel limitation to reduce soot emission, especially during HCCI to Cl transitions. One ISG (Integrated Starter Generator) motor is applied to perform dynamic torque compensations in transient operations. Engine friction torque is estimated by means of cylinder pressure information from in-cylinder pressure sensors. On the basis of torque estimation, the difference between desired engine brake torque and actual engine brake torque is obtained. The torque output of ISG motor accounts for this torque gap and the torque pre distributed to ISG motor. The strategy is verified by engine tests. Experimental results indicate that, with the finely defined air-fuel coordination, less unstable combustion occurs and the target modes are established more quickly during transitions both in steady states and in transients. The torque deficiency during acceleration operations could be well compensated by the ISG motor. (C) 2013 Elsevier Ltd. All rights reserved.

Effects of fuel compensation in transitional cycles on the smoothness of combustion mode switching in a diesel engine

Injection Strategy During CI-HCCI Mode Switching in a Diesel Engine

Experimental Research on Smoothing Switch of CI-HCCI Combustion Mode

Fuel injection and EGR control strategy on smooth switching of CI/HCCI mode in a diesel engine

Fuel Adjustment to Achieve A Smooth Net Indicated Mean Effective Pressure During Mode Switching from Homogeneous Charge Compression Ignition to Conventional Diesel Compression Ignition in A Transient Hydrocarbon Emissions Study

Effects of Key Factors on the Engine Combustion Mode Switching Between HCCI and SI

Effects of Multi-Injection Mode on Diesel Homogeneous Charge Compression Ignition Combustion

Combustion Mode Switching Control in A Hcci Diesel Engine

Effects Of Heat Release Mode On Emissions And Efficiencies Of A Compound Diesel Homogeneous Charge Compression Ignition Combustion Engine

Towards a Comprehensive Understanding of Mode Transition Between Biodiesel-Biobutanol Dual-Fuel ICCI Low Temperature Combustion and Conventional CI Combustion – Part Ⅰ: Characteristics from Medium to High Load

Study on the Transition Mode of Ethanol SI-HCCI-SI Combustion Mode Transition

Control of a spark ignition homogeneous charge compression ignition mode transition on a gasoline direct injection engine

Effects of injection pressure, exhaust gas recirculation and intake pressure on the cycle-to-cycle variations of HCCI combustion

SI/HCCI Mode Switching Optimization in a Gasoline Direct Injection Engine Employing Dual Univalve System

Characteristics and energy distribution of modulated multi-pulse injection modes based diesel HCCI combustion and their effects on engine thermal efficiency and emissions

Experimental Study on the Influence of Low-Temperature Combustion (LTC) Mode and Fuel Properties on Cyclic Variations in a Compression-Ignition Engine

Combustion Mode Transition Between HCCI and SI in Load Transition

The Combustion Cycle Fluctuation Analysis of Premixed Methanol Charge Induced by F-T Diesel

Injection Mode Modulation for HCCI Diesel Combustion

Experimental Investigation of the Effect of Mixed Additives on Homogeneous Charge Compression Ignition Combustion

Study on the Controlling Strategies of Homogeneous Charge Compression Ignition Combustion with Fuel of Dimethyl Ether and Methanol