Abstract:Instability evolution in a transitional hypersonic boundary layer and its effects on aerodynamic heating are investigated over a 260 mm long flared cone. Experiments are conducted in a Mach 6 wind tunnel using Rayleigh-scattering flow visualization, fast-response pressure sensors, fluorescent temperature-sensitive paint (TSP) and particle image velocimetry (PIV). Calculations are also performed based on both the parabolized stability equations (PSE) and direct numerical simulations (DNS). Four unit Reynolds numbers are studied, 5.4, 7.6, 9.7 and$11.7\times 10^{6}~\text{m}^{-1}$. It is found that there exist two peaks of surface-temperature rise along the streamwise direction of the model. The first one (denoted as HS) is at the region where the second-mode instability reaches its maximum value. The second one (denoted as HT) is at the region where the transition is completed. Increasing the unit Reynolds number promotes the second-mode dissipation but increases the strength of local aerodynamic heating at HS. Furthermore, the heat generation rates induced by the dilatation and shear processes (respectively denoted as$w_{\unicode[STIX]{x1D703}}$and$w_{\unicode[STIX]{x1D714}}$) were investigated. The former item includes both the pressure work$w_{\unicode[STIX]{x1D703}1}$and dilatational viscous dissipation$w_{\unicode[STIX]{x1D703}2}$. The aerodynamic heating in HS mainly arose from the high-frequency compression and expansion of fluid accompanying the second mode. The dilatation heating, especially$w_{\unicode[STIX]{x1D703}1}$, was more than five times its shear counterpart. In a limited region, the underestimated$w_{\unicode[STIX]{x1D703}2}$was also larger than$w_{\unicode[STIX]{x1D714}}$. As the second-mode waves decay downstream, the low-frequency waves continue to grow, with the consequent shear-induced heating increasing. The latter brings about a second, weaker growth of surface-temperature HT. A theoretical analysis is provided to interpret the temperature distribution resulting from the aerodynamic heating.

Analysis on Thermal Environment of Interaction Region Around Protuberance in High Speed Flows

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Slip Boundary Conditions for Rough Surfaces

Computational Study of Lateral Jet Interaction in Hypersonic Thermochemical Non-Equilibrium Flows Using Nonlinear Coupled Constitutive Relations

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Numerical Computation and Flowfield Analysis of Hypersonic Flow over a Double-Cone Body

A Study of Arc Plasma Energy Deposition Flow Control on Blunt-Headed Protuberance Induced STBLI

Theory-based prediction of separation angle and peak pressure for laminar separated hypersonic compression corner flows

Mechanism study on drag reduction and thermal protection for the porous opposing jet in hypersonic flow

Flow characteristics and thermal fields in fan-coupled jet impingement

Heat Transfer and Flow Characteristics of the Jet Array Impingement

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

Hypersonic flow and heat transfer of a micro-rough plate in the near-continuum regime

Interfacial phenomena and heat transfer associated with multi-droplet impact on flowing liquid film

Parametric Effects on Interface Evolution and Heat Transfer in Droplet Impact on Flowing Liquid Film

Research on a novel combined shock control mechanism for thermal protection and drag reduction in hypersonic compressible flow field

Newly Identified Principle for Aerodynamic Heating in Hypersonic Flows

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Analytical mechanisms for heat flux reduction on a V-shaped blunt leading edge

Numerical Investigation and Parameter Sensitivity Analysis on Flow and Heat Transfer Performance of Jet Array Impingement Cooling in a Quasi-Leading-Edge Channel

Investigation of aerodynamic heating in V-shaped cowl-lip of the inward turning inlet