Abstract:To further improve the application and promotion of 6xxx Al alloys, we researched the mechanical properties of the Mg 2 Si brittle phase. The influence of different transition metals (M = Sc, Ti, V, Cr Y, and Nb) on the stability and mechanical properties of the Mg 2 Si phase was studied using first-principles calculations. The results indicate that transition metals can effectively reduce the cohesive energy of the Mg 2 SiM phase compared to pure Mg 2 Si (Pure Mg 2 Si: − 2.831 eV; Sc–Mg-1: − 3.099 eV; Ti–Mg-1: − 3.197 eV; V–Mg-1: − 3.229 eV; Cr–Mg-1: − 3.243 eV; Y–Mg-1: − 3.097 eV; Nb–Mg-1: − 3.367 eV), thereby enhancing the material's energy stability. In terms of mechanical properties, Nb–Mg-1 exhibits superior toughness and lower hardness compared to the pure Mg 2 Si phase (Pure Mg 2 Si: Pugh's ratio = 1.184, H V = 11.337 GPa; Nb–Mg-1: Pugh's ratio = 1.639, H V = 6.431 GPa). The other five transition metals also contribute to improved toughness and reduced hardness in the Mg 2 SiM phase to varying degrees (Ti–Mg-1: Pugh's ratio = 1.617, H V = 6.692 GPa; Y–Mg-1: Pugh's ratio = 1.603, H V = 6.526 GPa; Cr–Mg-1: Pugh's ratio = 1.577, HV = 6.917 GPa; V–Mg-1: Pugh's ratio = 1.507, HV = 7.155 GPa; Sc–Mg-1: Pugh's ratio = 1.351, HV = 8.559 GPa). This is because the addition of Nb promotes orbital hybridization between Si and Nb, reduces the energy required for dislocation slip, and improves the mechanical properties of the material. The differential charge density and charge transfer also confirm this phenomenon. This study provides valuable insights into enhancing the ductility of the Mg 2 Si phase and improving the application of 6xxx Al alloys.

First-principles Study on the Elastic Properties of B′ and Q Phase in Al–Mg–Si (–cu) Alloys

The Structural, Elastic And Thermodynamic Properties Of Intermetallic Phases In Mg-Sn-Si-Ca(Sr) Alloys: A First-Principles Study

First-principles Investigation of the Structural, Mechanical and Thermodynamic Properties of Al2Cu Phase under Various Pressure and Temperature Conditions

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Understanding off-stoichiometry of Q-phase in Al-Cu-Mg-Si alloys

Mechanical And Thermodynamic Properties Of Mg17la2, La5si4 And La5sn3 Phases In Mg-Sn-Mn(Si)-La Alloy From First-Principles Calculations

First-principles Calculations of Bulk and Interfacial Thermodynamic Properties of the T1 phase in Al-Cu-Li alloys

Microstructure and Mechanical Behavior of Quaternary Eutectic α+θ+Q+Si Clusters in As-Cast Al-Mg-Si-Cu Alloys

Effect of Anti-Site Point Defects on the Mechanical and Thermodynamic Properties of MgZn2, MgCu2 Laves Phases: A First-Principle Study

Structural Evolution, Mechanical Properties, and Electronic Structure of Al–Mg–Si Compounds from First Principles

First-Principles Investigations on Structural Stability, Elastic Properties and Electronic Structure of Mg32(Al,Zn)49 Phase and MgZn2 Phase

Structural, Elastic, and Electronic Properties of Al-Cu Intermetallics from First-Principles Calculations

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

First-principles investigation of the phase stability of MgAl 2 compounds

Improvement of mechanical properties of Mg2Si phase system by doping transition metals: a first-principles study

First-Principles Investigation of Elasticity, Thermal and Electronic Properties of Intermetallics Formed at the Interface of Al-Cu Composites

Influence of Mg Doping on the Structure and Mechanical Properties of Al2Cu Precipitated Phase by First-Principles Calculations

Molecular Dynamics Study of Stability of Solid Solutions and Amorphous Phase in the Cu-Al System

Effect of transition-elements substitution on mechanical properties and electronic structures of B2-AlCu compounds

The Alloying Strategy to Tailor the Mechanical Properties of θ-Al13Fe4 Phase in Al-Mg-Fe Alloy by First-Principles Calculations

First-Principles Study of the Structural, Mechanical, Electronic, and Thermodynamic Properties of AlCu2M (M = Ti, Cr, Zr, Sc, Hf, Mn, Pa, Lu, Pm) Ternary Intermetallic Compounds