Abstract:Conventional MCM-41 (M41), silica-pure pore-expanded MCM-41 (PM41), and Al-containing pore-expanded MCM-41 (PM41Ax) were synthesized from rice husk ash and tested as polyethyleneimine (PEI) supports for CO2 capture. Samples were characterized by small-angle X-ray diffraction, X-ray fluorescence spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, granulometric analysis, and nitrogen adsorption techniques. The PEI loading rate and CO2 adsorption-desorption performance were determined via thermogravimetric analysis. The effects of pore expansion, heteroatom Al incorporation, PEI loading rate, and Si/Al ratio on CO2 adsorption performance were examined. For the first time, the amount of PEI impregnated in PM41 was increased beyond 55 wt%, and the low-Si/Al-ratio PM41Ax support was used to load PEI in a novel procedure. Results show that at the same PEI loading rate, PM41 is always superior to M41 regarding adsorption capacity and adsorption rate. For a PEI loading rate >50 wt%, the superiority is amplified, reaching 15.9% and 21.3%, respectively. The use of the high-Al-containing PM41Ax support further increases adsorption capacity and adsorption rate by 13.4% and 9.6%, respectively. The presented reaction has a hybrid adsorption characteristic that includes both chemisorption and physisorption. Avrami’s fractional-order kinetic model describes the adsorption best. Over the entire time scale, the adsorption rate is determined by several kinetic diffusion-controlled processes. The intraparticle diffusion and equilibrium adsorption are two predominant rate-limiting steps, and their control ranges change with temperature. After five cycles of adsorption and desorption, the desorption ratio was as high as 99%, and the working capacity still retained 96.5% of the original capacity. In addition, the presence of water vapor increased the adsorption capacity of the adsorbents presented in this study. These advantages make them successful iin capturing CO2 in the post-combustion scenario.

Surface Modification of a Low Cost Bentonite for Post-Combustion CO2 Capture

Development of A New Clay Supported Polyethylenimine Composite for Co2 Capture

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Amine-functionalized Mesoporous Silica Derived from Natural Phyllosilicate for Efficient CO2 Adsorption

Sulfuric Acid Modified Bentonite As the Support of Tetraethylenepentamine for Co2 Capture

Impregnation of PEI in Novel Porous MgCO3 for Carbon Dioxide Capture from Flue Gas

Tuning the Acidity and Textural Properties for Enhanced Economical CO2 Capture in Polyethyleneimine (PEI) Supported Adsorbents

Experimental Testing and Mechanism Investigation of Amine-Functionalized Layered Vermiculite for CO2 Capture

Carbon Dioxide Capture with Polyethylenimine-Functionalized Industrial-Grade Multiwalled Carbon Nanotubes

Discovering Inherent Characteristics of Polyethylenimine-Functionalized Porous Materials for CO2 Capture

Development of a pentaethylenehexamine-modified solid support adsorbent for CO 2 capture from model flue gas

Amine-impregnated Porous Carbon–silica Sheets Derived from Vermiculite with Superior Adsorption Capability and Cyclic Stability for CO2 Capture

Experimental testing and mechanism investigation of amine-functionalized layered vermiculite for CO 2 capture

Underlying Roles of Polyol Additives in Promoting CO2 Capture in PEI/Silica Adsorbents

Amine-modified SBA-15: Effect of pore structure on the performance for CO2 capture

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Carbon dioxide capture using polyethylenimine-loaded mesoporous carbons.

Novel Polyethylenimine-Modified Mesoporous Molecular Sieve of Mcm-41 Type As High-Capacity Adsorbent for Co2 Capture

Adsorptive Removal of Carbon Dioxide Using Polyethyleneimine Supported on Propanesulfonic-Acid-Functionalized Mesoporous SBA-15

Molecule‐level Design to Form Pocket Structures for Improving Amine Efficiency in CO2 Capture

Study of rice husk ash derived MCM-41-type materials on pore expansion, Al incorporation, PEI impregnation, and CO2 adsorption