Abstract:In recent years, global warming and climate change caused by the greenhouse gas emissions has given rise to widespread concerns. CO2 has been considered as the principal greenhouse gas of interest, and fossil-fuel-fired power plants have been deemed as the largest stationary sources of CO2 emission. It is imperative to capture CO2 from these sources to reduce the global CO2 emissions. Lately, capturing CO2 from flue gas using solid absorbents shows promising for CO2 abatement. For the cost-effective CO2 capture process and the recycling of environmental pollutants, deprecated resources have been utilized for CO2 capture from flue gas. In this work, fly ashes derived from different raw materials were tried as solid CO2 sorbents for flue gas treatment. To improve their CO2 capture capacities, the ashes were modified by different polyamines. An experimental demonstration on CO2 capture behaviors of fresh ashes and modified sorbents in simulated flue gas atmosphere of 40°C, 15% CO2 + 15% H2O and balanced N2 was presented in detail with a fixed-bed reactor system. CO2 capture capacities of fresh ashes were calculated as 0.56 mmolCO2/g, 0.32 mmolCO2/g, 0.44 mmolCO2/g and 0.83 mmolCO2/g, respectively. By contrast, CO2 capture capacities of amine-modified samples had been enhanced as 0.38 mmolCO2/g, 0.65 mmolCO2/g, 1.07 mmolCO2/g, 0.85 mmolCO2/g and 1.17 mmolCO2/g. The optimal sample of TEPA-modified biomass ash (TEPA-BA) with CO2 capture capacity of 1.17mmolCO2/g was screened. The optimal candidate was then selected for further investigation of the effects of temperature, CO2 concentration and H2O concentration on its CO2 capture behaviors. The results indicated that CO2 capture capacity would increase with the increase of temperature in the range of 30 to 40 °C and decrease with the increase of temperature in the range of 40 to 60°C, increase with the increase of CO2 concentration in the range of 5% to 20%, increase with the increase of H2O concentration in the range of 0% to 15% and decrease with the increase of H2O concentration in the range of 15% to 20%. The results in this work could provide basic data as a guidance for further applying the sorbents in practical operations.

Sulfuric Acid Modified Bentonite As the Support of Tetraethylenepentamine for Co2 Capture

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Porous Sulfur-Doped Titanate As the Support of Tetraethylenepentamine for CO2 Capture

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

An Immobilized Amine with Improved Cyclic Performance Prepared from Carboxyl Modified Mesoporous Silica for CO2 Capture

Biomass Derived Wood Ash with Amine Modification for Post-Combustion CO 2 Capture

Improvement of Adsorbent Materials for CO 2 Capture by Amine Functionalized Mesoporous Silica with Worm-Hole Framework Structure

Adsorption separation of CO_2 from flue gas by hyperbranched solid-amine

Exfoliated vermiculite nanosheets supporting tetraethylenepentamine for CO2 capture

Development of a pentaethylenehexamine-modified solid support adsorbent for CO 2 capture from model flue gas

Synergy Tetraethylenepentamine and Diethanolamine Impregnated Within Silica Nanotubes Derived from Natural Halloysite for Efficient CO2 Capture

Enhanced SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid functionalized SBA-15 during CO2 capture from flue gas

Enhancing Capture Performance of Physical Solvent Biphasic Absorbent Using Tepa As Activator for Efficient Co2 Capture from Flue Gas

Studies on Several Fly Ashes and Their Modified Materials for CO2 Capture

Preparation of Mesoporous Coal-Gasification Fine Slag Adsorbent Via Amine Modification and Applications in CO2 Capture

Fly ash-derived mesoporous silica with large pore volume for augmented CO 2 capture

Synergy tetraethylenepentamine and diethanolamine impregnated within silica nanotubes derived from natural halloysite for efficient CO 2 capture

Attapulgite as a cost-effective catalyst for low-energy consumption amine-based CO2 capture

Ultrasonic-assisted Preparation of Organic Amine-Modified SBA-15 for CO2 Capture in Wide Temperature Range: Experimental and Computational Investigation