Abstract:In this work, an experimental and theoretical investigation was conducted on the adsorptive removal of CO2 onto tetraethylenepentamine (TEPA) functionalized mesoporous SBA-15. The functionalization of SBA-15 silica with TEPA was achieved using a conventional wet impregnation technique. The structural properties of the mesoporous silica sorbents were characterized by nitrogen adsorption/desorption, SAXS, SEM, TEM, and FTIR techniques. The adsorption of CO2 on the amine-impregnated sorbent was measured by thermogravimetric method over a CO2 partial pressure range of 10–100 kPa and a temperature range of 30–100 °C under atmospheric pressure. The effects on CO2 adsorption capacity of temperature, partial pressure of CO2, amine loading, and moisture were evaluated. All the impregnated SBA-15 sorbents showed reversible CO2 adsorption behaviors with fast adsorption kinetics. The CO2 adsorption capacity measured at different temperatures suggests that the optimal adsorption temperature is 75 °C. The CO2 uptake of the amine-impregnated sorbent increased significantly in the presence of moisture. SBA-15 containing 60 wt % TEPA showed the highest CO2 adsorption capacity of 5.22 mmol/g in pure and humid CO2 at 75 °C. Temperature swing adsorption/desorption cycles were also explored using simulated flue gas in both dry and humid conditions, and it was found that CO2 uptake after ten cycles was within 90% of CO2 uptake of the first cycle. Different adsorption kinetic models have also been investigated to analyze the experimental data of CO2 uptake. The model was validated with the experimental results of isothermal adsorption measurements of CO2 on SBA-15/TEPA. It has been found that Fractional Order kinetic model (Chem. Eng. J. 2011, 173, 72) is very good over the entire adsorption region of the study with a maximum average absolute deviation between experimental CO2 uptake and that calculated from the model of about 2.42%.

Porous Sulfur-Doped Titanate As the Support of Tetraethylenepentamine for CO2 Capture

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Capture of carbon dioxide by amine-loaded as-synthesized TiO2 nanotubes

Epoxide-functionalized Tetraethylenepentamine Encapsulated into Porous Copolymer Spheres for CO2 Capture with Superior Stability

Adsorption of low-concentration carbon dioxide on amine-modified carbon nanotubes at ambient temperature

Synergy tetraethylenepentamine and diethanolamine impregnated within silica nanotubes derived from natural halloysite for efficient CO 2 capture

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Exfoliated vermiculite nanosheets supporting tetraethylenepentamine for CO2 capture

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Efficient CO2 Capturer Derived from As-Synthesized MCM-41 Modified with Amine.

Synthesis of na-doped lithium metatitanate and its absorption for carbon dioxide

Adsorption separation of CO_2 from flue gas by hyperbranched solid-amine

CO2 Capture by As-Prepared SBA-15 with an Occluded Organic Template

Effect of pore structure of silica support on the performance of CO 2 capture

Adsorption Capacity of Carbon Dioxide on Amine Modified Mesoporous Materials with Larger Pore Sizes

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

Polyethyleneimine functionalized protonated titanate nanotubes as superior carbon dioxide adsorbents.

Carbon Dioxide Adsorption on Amine-Impregnated Mesoporous SBA-15 Sorbents: Experimental and Kinetics Study