Abstract:High dielectric loss is a major drawback in CCTO-based electroceramics, and such high dielectric loss supports good microwave coupling for microwave synthesis of ceramics. Al substitution at Ti site and presence of moderate amount of secondary CuO intergranular melt-like phase can improve the dielectric properties of the ceramics. Therefore, microwave-assisted solid-state reaction was used to synthesize polycrystalline CaCu3Ti4−xAlxO12 (x = 0, 0.025, 0.05, 0.075, 0.1) ceramics. Lattice parameters and different amount of CuO phase were extracted from X-ray diffraction data via Rietveld refinement. Presence of grains with different morphology, and different kind of interfaces were confirmed through microstructure evolution. An approximate elemental analysis was revealed through selective area EDX. Variations in dielectric and impedance properties with frequency and temperature were investigated as an effect of Al3+ substitution at Ti4+ sites and appearance of secondary CuO phase. Maximum dielectric constant (εr) ~ 23,000 with ‘tan δ’ ~ 0.076 at 100 Hz has been observed for x = 0.05 ceramics at room temperature. Equivalent electrical circuits were proposed to understand the contributions arising from different electrically heterogeneous portions of CCTO-based ceramics. An elementary theoretical framework, based on different grains and interfaces (boundaries), has been proposed to understand the improved dielectric properties. Activation energies were calculated from imaginary part of impedance (Z″) and modulus (M″) functions and the values were in close agreement with activation energies associated to oxygen vacancies. In addition, defect chemistry has been discussed to understand the appearance of CuO phase as melt and the improvement of dielectric loss.

Conductivity, Dielectric Loss, and Electrical Heterogeneous Microstructure of Eight‐Layer Twinned Hexagonal Perovskite Ceramics Ba8CuTa6O24−δ

Dielectric abnormities in complex perovskite BaTi1-x(Co 0.5Nb0.5)xO3 ceramics

Structure, phase composition, and microwave dielectric properties of Ba16SnNb12O48 ceramic

Effect of Lattice Defects on Crystal Structure and Microwave Properties of Ba(Ga1/2Ta1/2)O3 Doped Ba(Zn1/3Nb2/3)O3 Ceramics

High Permittivity and Low Loss Dielectric Ceramics in the BaO–La2O3–TiO2–Ta2O5 System

Microwave Dielectric Properties And Thermally Stimulated Depolarization Currents Study Of (1-X)Ba0.6sr0.4la4ti4o15-Xtio(2) Ceramics

Ba6Nb4SnO18: An AnBn-1O3n-type hexagonal perovskite microwave dielectric ceramic with low-loss

Conductivity and Dielectric Loss of Tungsten-Bronze-Type Band2ti4o12 Microwave Ceramics

Low-loss (1-X)ba0.6sr0.4la4ti4o1 5-Xcatio3 Microwave Dielectric Ceramics with Medium Permittivity

Layered SrTiO3/BaTiO3 composites with significantly enhanced dielectric permittivity and low loss

Structural and Dielectric Characterization of Ba4Nd2Ti4+xTa6−xO30−x/2 Nonstoichiometric Ceramics

Bismuth Oxide Modified Europium and Niobium Co-Doped Titanium Dioxide Ceramics: Colossal Permittivity and Low Dielectric Loss Design

Effect of Al substitution and secondary CuO phase on dielectric response in microwave-processed CaCu3Ti4−xAlxO12 ceramics

Effects of Zr4+ and Hf4+ substitution on the structure and dielectric response of Ba4Sm9.33Ti18O54 ceramics

High-temperature Relaxation and Microwave Dielectric Response of (1-X)band1.76bi0.24ti5o14-xba0.6sr0.4la4ti4o15 Compounds with Adjustable Medium-High Dielectric Constant

A novel low temperature and low loss Ba2Bi2/3TeO6 microwave dielectric ceramic with double perovskite structure for LTCC applications

A new low-loss SrLaMgTaO6 microwave dielectric ceramic with cubic structure

Structure dependence of microwave dielectric properties in Zn2-SiO4--xCuO ceramics

Structural and Dielectric Characteristics in (1−x)ba(ni1/2w1/2)o3–xbatio3 Perovskite Solid Solutions

High Dielectric Strength and Energy Storage Density in Ba6−3xLn8+2xTi18O54 (ln = La, Sm) Low-Loss Dielectric Ceramics

Layered-perovskite Ca 1- X Ba X La 4 Ti 5 O 17 Microwave Dielectric Ceramics with Medium Dielectric Constant