Abstract:ZrO 2 ceramics are commonly known as 'hard and brittle' materials due to their exceptional properties, such as high hardness, heat resistance, chemical stability, and low thermal conductivity. However, the hole processing technique for ZrO 2 ceramics often results in significant tool wear and compromises the quality of the holes. This study investigates the removal mechanism of ZrO 2 ceramic materials by using carbide tools, diamond-coated carbide tools, and micro-sintered tools. It also analyzes the impact of processing parameters on the wear mechanism of different tools and the quality of hole processing in ZrO 2 ceramics. The findings revealed that at high spindle speed (8000 r/min) and low feed rate (1 mm/min), the diamond coating on the rake surface of the diamond-coated carbide tool tends to peel off, leading to the formation of sharp edges on the flank surface. This phenomenon results in a reduction in thrust forces. Moreover, it is observed that as the number of hole machining operations increases, the peeling of the diamond coating on the tool flank becomes more severe. The increase in feed rate causes the diamond coating peeling area on the rake face of the tool to expand toward the chisel edge and even reach the thinned edge area near the chisel edge. When the feed rate of carbide tools increases, the wear degree of the chisel edge gradually increases, while the wear degree of the main cutting edge corner position gradually decreases. At low spindle speeds, the main cutting edge breaks and the cutter head is also damaged and deformed. The main wear mechanisms of micro-sintered tools involve shedding, fragmentation, wear, and adhesion of diamond abrasive grains. The bottom surface of the tool tends to accumulate a significant amount of flaky adhesion, which dulls the tool and increases thrust force. In contrast to carbide tools, diamond-coated carbide tools offer improved hole exit quality. However, micro-sintered tools often exhibit large volumes of flaking at the hole exits, resulting in shell-like stripes on the peeled surface.

Tool wear mechanism of diamond cutting of ferrous metals in frictional wear experiments

A review of tool wear mechanism and suppression method in diamond turning of ferrous materials

A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals

Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool

Wear mechanism of diamond-cutting tool in nano-cutting polycrystalline γ-TiAl alloy based on molecular dynamics simulation

STUDY ON THE WEAR PERFORMANCES OF CERAMIC TOOLS FOR MACHINING 304 STAINLESS STEEL

Diamond Tool Wear Reduction by Combining Ultrasonic Elliptical Vibration with Graphite Particle Atmosphere

Cutting performance and wear mechanism of multilayer diamond coated tools

Comparative analysis of the brazing mechanism and wear characteristics of brazed diamond abrasive with Zr-alloyed Cu-based filler metals

Suppression mechanism of diamond tool wear by graphene nanofluid in micro-milling of TC4 alloy: A study combining experimental and molecular dynamics

Wear mechanisms of diamond segmenta in cutting of carbon fiber reinforced cement-based composite and optimizing in parameters

Friction Behavior and Self-Lubricating Mechanism of SLD-MAGIC Cold Worked Die Steel during Different Wear Conditions

A study of the wear mechanism of diamond-like carbon films

Comparative study of tool wear mechanisms in drilling ZrO2 ceramics using various tool types

Adhesion and friction behaviors of a γ-Fe/diamond heterogeneous contact interface: a density functional theory study

Tribological Properties of Diamond Films and Graphite/diamond Composite Films with Dry Friction

Study on the effect of laser-assisted machining on tool wear based on molecular dynamics simulation

Ultrasonic Vibration Cutting of Stainless Steel with Polycrystalline Diamond Tools

A comparative friction and wear study of diamond and diamond-like carbon films against Cu

Study on tool wear mechanism of single-crystal diamond in ultrasonic vibration elliptical cutting of tungsten heavy alloy

Simulation study on mechanical wear of the diamond grain cutting pipeline steel