Abstract:Additively manufactured components often exhibit pronounced anisotropy due to the heterogeneous microstructure generated by the complex and repetitive thermal cycling history. Grain orientation is one of the determinant microstructural features that influences the activation of different deformation mechanisms. In this work, laser powder-bed fusion (LPBF) was applied to fabricate Fe49.5Mn30Co10Cr10C0.5 interstitial-strengthened high entropy alloy (iHEA). Fabrication was performed at angles of 0° and 90° relative to the main laser scanning direction, and the plastic deformation behavior of these two oriented specimens was studied. The initial microstructure of the LPBF-built iHEA was composed of a complex heterogeneous columnar grains containing high-density dislocation network and a large number of stacking faults, as well as nano-precipitates and elemental segregation of Mn at subgrain boundaries. During uniaxial tension in-situ high-energy synchrotron X-ray diffraction (HE-SXRD) was performed to track the deformation processes and mechanisms of this metastable iHEA. The influence of different deformation mechanisms on the mechanical responses of the current LPBF-built iHEA was scrutinized combining in-situ HE-SXRD with electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) analyses, which not only gives insights into the macrostructural evolution but also provides comprehensive characterization on microstructural responses and the orientation-dependent effects imposed by the fabrication constraints originally imposed. The implemented multiscale characterization revealed the presence of a strain-induced fcc to hcp phase transformation, which is influenced by the growth texture close to <110> along the building direction. Moreover, EBSD and TEM analysis of the fracture regions uncovered the formation of nanosized deformation twins, confirming the simultaneous activation of phase transformation- and twinning-induced plasticity (TRIP and TWIP) effects. The results obtained in this work gain new insights into orientation-dependent deformation behavior of additively manufactured iHEA, which facilitates the microstructural design when exploiting the TRIP/TWIP effects.

In Situ High-Energy X-ray Diffraction Studies of Deformation-Induced Phase Transformation in Ti-based Amorphous Alloy Composites Containing Ductile Dendrites

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

In Situ X-Ray Diffraction Study of Deformation Behavior in A Fe/Niti Composite

High-energy X-ray Diffuse Scattering Studies on Deformation-Induced Spatially Confined Martensitic Transformations in Multifunctional Ti–24Nb–4Zr–8Sn Alloy

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites

In Situ Investigation of the Deformation Behaviors of Fe20Co30Cr25Ni25 and Fe20Co30Cr30Ni20 High Entropy Alloys by High-Energy X-ray Diffraction

High temperature micro-deformation behavior of continuous TiNb fiber reinforced TiAl matrix composite investigated by in-situ high-energy X-ray diffraction

Reversible Deformation-Induced Martensitic Transformation in Al0.6CoCrFeNi High-Entropy Alloy Investigated by in Situ Synchrotron-Based High-Energy X-ray Diffraction

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

In Situ Atomic-Scale Observation of Deformation-Induced Reversible Martensitic Transformation in a CrMnFeCoNi High Entropy Alloy

In Situ Scanning and Transmission Electron Microscopy Investigation on Plastic Deformation in a Metastable Β Titanium Alloy

Elastic Plastic Deformation of TC6 Titanium Alloy Analyzed by In-Situ Synchrotron Based X-ray Diffraction and Microstructure Based Finite Element Modeling

In Situ Neutron Diffraction Study of a New Type of Stress-Induced Confined Martensitic Transformation in Fe22Co20Ni19Cr20Mn12Al7 High-Entropy Alloy

Deformation Processes of Additively Manufactured Interstitial-Strengthened High Entropy Alloy: In-situ High-Energy Synchrotron X-ray Diffraction and Microstructural Appraisal

In Situ Observation of Deformation Behavior of Ti6Al4V Subjected to Electrically-Assisted Forming Process

High Temperature Micromechanical Behavior of Ti2AlN Particle Reinforced TiAl Based Composites Investigated by In-Situ High-Energy X-ray Diffraction

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

Phase Transformation Behaviors of TiNi Fibers Embedded in an Aluminum Matrix

High-Energy Synchrotron X-Ray Diffraction for in Situ Study of Phase Transformation in Shape-Memory Alloys

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy