Abstract:The high upper critical field and low anisotropy of iron-based superconductors (IBS) make them particularly attractive for high-field applications, especially for the construction of next-generation nuclear magnetic resonance spectrometers, particle accelerators and high-field magnets. However, for practical use it is essential to make IBS materials into wire and tape conductors with sufficient current carrying capability, which is limited by misaligned grains inside the conductors. Here, based on a simple and low-cost powder-in-tube (PIT) method, we demonstrate a high transport critical current density (Jc) reaching 1.5 × 105 A cm−2 (Ic = 437 A) at 4.2 K and 10 T in Ba0.6K0.4Fe2As2 (Ba-122) tapes by texturing the grain orientation with optimized hot-press technique. The transport Jc measured at 4.2 K under high magnetic fields of 27 T is still on the level of 5.5 × 104 A cm−2. Moreover, at 20 K and 5 T the transport Jc is also as high as 5.4 × 104 A cm−2, showing a promising application potential in moderate temperature range which can be reached by liquid hydrogen or cryogenic cooling. All these Jc values are the highest ever reported for IBS wires and tapes. The high-performance PIT Ba-122 tapes in this work suggest IBS to be a strong potential competitor of cuprate superconductors for the race of high-field applications in the future.

Large Transportjcin Sn-added SmFeAsO1−xFxtapes Prepared by Anex Situpit Method

Enhancement of transport critical current density of SmFeAsO1-xFx tapes fabricated by an ex-situ powder-in-tube method with a Sn-presintering process

High Transport Critical Current Densities in Textured Fe-sheathed Sr1−xKxFe2As2+Sn Superconducting Tapes

Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes

Strongly enhanced current densities in Sr0.6K0.4Fe2As2 superconducting tapes

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

Low-temperature synthesis of SmFeAsO0.7F0.3 wires with high transport critical current density

Textured Sr1-xKxFe2As 2 superconducting tapes with high critical current density

Superconducting Properties of Granular Smfeaso1-Xfx Wires with T-C=52 K Prepared by the Powder-In-Tube Method

Improved transport critical current in Ag and Pb co-doped Ba xK 1xFe 2As 2 superconducting tapes

Transport Critical Currents in the Iron Pnictide Superconducting Wires Prepared by the Ex Situ Pit Method

Critical Current Density and AC Magnetic Susceptibility of High-Quality FeTe0.5Se0.5 Superconducting Tapes

Critical Current and Flux Pinning Characteristics in Sr0.6K0.4Fe2As2 Superconducting Tapes

Low-Temperature Synthesis of Smfeaso0.7f0.3-Delta Wires with A High Transport Critical Current Density

Development of high-performance iron-based superconducting wires and tapes

Critical current density and microstructure of iron sheathed multifilamentary Sr1-xKxFe2As2/Ag composite conductors

Observation of reversible critical current performance under large compressive strain in Sr0.6K0.4Fe2As2 tapes

Tailoring the Critical Current Properties in Cu-sheathed Sr1−xKxFe2As2superconducting Tapes

Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils

Transport Critical Current Density of Fe Sheath Mgb2 Tapes Sintered at Different Temperatures

Superconductivity and transport properties in Th and F codoped Sm 1-xTh xFeAsO 1-yF y