Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Novel Tri-Band Bandpass Filter Using Stub Loaded Short-Ended Resonator

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Design of novel multiband bandpass filters based on coupled symmetric short‐circuit stub multimode resonators

A novel compact triple-passband filter design based on stepped impedance stub-loaded resonators

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Tri-band Superconducting Filter Using Stub-Loaded Stepped-Impedance Resonators

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Compact Quad‐ and Quint‐band BPFs Based on Multimode Stub Loaded Resonators

A Novel Tri-Band Superconducting Filter Using Embedded Stub-Loaded Resonators

Compact Quad-Band BPF Using Quad-Mode Stub Loaded Resonators

Proposal of Coplanar Stripline Series Stub Structure for Wideband Bandpass Filters

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

Single-wideband and dual-band bandpass filters based on compact quadruple-mode resonator