Abstract:This paper presented a silica-based 1×8 optical power splitter at 0.85μm designed with Multi Mode Interference (MMI). The waveguide material is Si-based SiO2 doped with Ge and deposited by PECVD (Plasma Enhanced Chemical Vapor Deposition) method. The refractive index of glass substrate is 1.458, and the index difference is 0.75%. The input and output waveguides are optimized considering the characteristics of VCSEL (Vertical Cavity Surface Emitting Lasers). The core pitch on this chip is chosen as 250μm to take the fiber connections into account, and the typical cladding diameter of optical fibers as 125µm. The critical parameters in the fabrication of the MMI power splitter are the multimode section width and length. In general the key performance specifications of the optical power splitter are insertion loss and uniformity. We use a Finite Difference Beam Propagation Method (FDBPM) to simulate accurately the evolution of the fundamental mode power of the input guide incoming to the device, and analyze the relationships of various parameters in detail. The bend output waveguides are sin-bend styles. Compared with the commercial optical power splitter, the simulation results accord with the requirement of our design, containing compact size, low loss, stable splitting ratio, low crosstalk, large optical bandwidth, and good fabrication tolerances. The insertion loss and the uniformity of pilot study are 9.07dB and 0.02dB respectively.

A Hybrid Plasmonic Multimode Interference Splitter Based on Metal-Gap-Silicon Waveguides

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Fabrication of A Multimode-Interference-Based Multimode Power Splitter in Glass

Multimode Interference Splitter Based on Dielectric-Loaded Surface Plasmon Polariton Waveguides

Design of MMI Double-wavelength Optical Power Splitters

Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

Efficient coupling between dielectric and hybrid plasmonic waveguides by multimode interference power splitter

Multimode Interference Demultiplexers and Splitters in Metal-Insulator-Metal Waveguides

A plasmonic splitter with flexible power splitting ratio at optical fiber communication waveband

Multimode Interference Effect in Plasmonic Subwavelength Waveguides and an Ultra-Compact Power Splitter

Plasmonic Wavelength Splitter Based on a Metal-Insulator-metal Waveguide with a Graded Grating Coupler.

Sub-μm2 Power Splitters by Using Silicon Hybrid Plasmonic Waveguides.

Protein-Based Multi-Mode Interference Optical Micro-Splitters

Ultra-compact Polarization Splitter Based on a Multimode Interference Coupler with a Silicon Hybrid Plasmonic Waveguide

3-D Design and Simulation of a New Type of 1×N MMI Power Splitter

Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Compact and economical MMI optical power splitter for optical communication

Arbitrary power-splitting-ratio achieved in 1×2 hybrid plasmonic multimode interference device by structure symmetry broken

Design and Simulation of a New Multimode Interference Power Splitter

Design and study of 0.85-µm wavelength-based MMI optical power splitter