Abstract:This paper presented a silica-based 1×8 optical power splitter at 0.85μm designed with Multi Mode Interference (MMI). The waveguide material is Si-based SiO2 doped with Ge and deposited by PECVD (Plasma Enhanced Chemical Vapor Deposition) method. The refractive index of glass substrate is 1.458, and the index difference is 0.75%. The input and output waveguides are optimized considering the characteristics of VCSEL (Vertical Cavity Surface Emitting Lasers). The core pitch on this chip is chosen as 250μm to take the fiber connections into account, and the typical cladding diameter of optical fibers as 125µm. The critical parameters in the fabrication of the MMI power splitter are the multimode section width and length. In general the key performance specifications of the optical power splitter are insertion loss and uniformity. We use a Finite Difference Beam Propagation Method (FDBPM) to simulate accurately the evolution of the fundamental mode power of the input guide incoming to the device, and analyze the relationships of various parameters in detail. The bend output waveguides are sin-bend styles. Compared with the commercial optical power splitter, the simulation results accord with the requirement of our design, containing compact size, low loss, stable splitting ratio, low crosstalk, large optical bandwidth, and good fabrication tolerances. The insertion loss and the uniformity of pilot study are 9.07dB and 0.02dB respectively.

Multimode Interference Splitter Based on Dielectric-Loaded Surface Plasmon Polariton Waveguides

Fabrication of A Multimode-Interference-Based Multimode Power Splitter in Glass

Design of MMI Double-wavelength Optical Power Splitters

A Hybrid Plasmonic Multimode Interference Splitter Based on Metal-Gap-Silicon Waveguides

Multimode Interference Optical Power Splitter in Proton-Exchange LiNbO3 Waveguides

Multimode Interference Demultiplexers and Splitters in Metal-Insulator-Metal Waveguides

Multimode Interference Effect in Plasmonic Subwavelength Waveguides and an Ultra-Compact Power Splitter

Optimization of MMI Optical Power Splitter Using Discrete Spectral Index Method

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Protein-Based Multi-Mode Interference Optical Micro-Splitters

Study and Fabrication of 1×16 MMI GaAs Optical Power Splitter

Design and study of 0.85-µm wavelength-based MMI optical power splitter

Multimode interference optical pulse power splitter for 1.053μm wavelength

Weak Guided MMI Optical Splitter

Efficient coupling between dielectric and hybrid plasmonic waveguides by multimode interference power splitter

Waveguide Mode Splitter Based on Multi-mode Dielectric-Loaded Surface Plasmon Polariton Waveguide

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

Compact and economical MMI optical power splitter for optical communication

3-D Design and Simulation of a New Type of 1×N MMI Power Splitter

Design and Simulation of a New Multimode Interference Power Splitter

Ultra-broadband MMI power splitter from 1.26 to 1.67 μm with photonic bound states in the continuum