Abstract:Purpose Laser melting deposition (LMD) is an advanced additive manufacturing (AM) technology without powder waste, and nickel-based alloys with different Nb contents were created one-time by adjusting the ratio of mixed powders via a dual-feed system. Here, the authors provide a systematic report on the effects of the Nb content on the microstructure, Laves phase segregation and mechanical properties of as-received LMD nickel-based alloys. The effects of the Nb content on the microstructure, precipitation evolution and mechanical properties of the subsequent heat-treated LMD samples are also discussed in this paper. Design/methodology/approach Thus, the present research aims to obtain a better understanding of the effect of Nb content on the microstructural and mechanical properties of the as-received LMD Inconel 718 alloys through high-throughput sample fabrication. The microstructures were characterized by scanning electron microscopy and energy-dispersive spectroscopy, electron back-scattered diffraction and transmission electron microscopy methods. The mechanical properties were obtained from compressive tests and nano-indentation tests. Electrochemical tests, including electrochemical impedance spectroscopy and potentiodynamic polarizations, were carried out to evaluate the durability of the Inconel 718 alloys. Results can provide a factual basis for future applications of the functionally graded by AM technology. Findings The grain size of the as-received LMD Inconel 718 alloys decreased with the Nb content. The Laves phase distribution at the macro level was relatively uniform and the Laves phase exhibited a 1.5-fold nano-hardness compared with the matrix. The strength improvement for the as-received LMD Inconel 718 alloys with Nb content was attributed to grain refinement and enhancement of the Laves phase in terms of both hardness and content. Meanwhile, the corrosion resistance increased with the increase of the Nb content, especially for the pitting potential, which was attributed to the optimization of carbide precipitates due to the strong affinity between niobium and carbon. Originality/value The results provide a factual basis for the Nb content effect in LMD nickel-based alloys, and this method can greatly promote the development of new materials. The authors believe that this study makes a significant contribution to the literature and is suitable for publication.

Effect of Heat Treatment on Niobium Segregation of Laser-Cladded IN718 Alloy Coating

Effect of Ultrarapid Cooling on Microstructure of Laser Cladding IN718 Coating

Segregation of Niobium in Laser Cladding Inconel 718 Superalloy

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power

Influence of heat treatment on laser clad Ta reinforced NiCrBSi coating

Effect of Precipitation on the Microhardness Distribution of Diode Laser Epitaxially Deposited IN718 Alloy Coating

Effect of Cooling Rate on Microstructure of K4169 Superalloy Coating Prepared by Laser Cladding

Effect of niobium on the microstructure and wear resistance of nickel-based alloy coating by laser cladding

Enhanced Corrosion Resistance of High Speed Laser-Cladded Ni/316l Alloy Coating by Heat Treatment

Effect of Chemical Segregation on Nanobainitic Transformation in Laser Cladded Coatings

Carbide and Nitride Precipitation During Laser Cladding of Inconel 718 Alloy Coatings

Effect of Conditions of High-Temperature Treatment on the Structure and Tribological Properties of Nickel-Based Laser-Clad Coating

Effect of Heat Treatment on Microstructure and Tribocorrosion Performance of Laser Cladding Ni-65 WC Coating

Effect of V and Cr transition layers on microstructure and mechanical properties of Ni-based coating on titanium alloy fabricated by laser cladding

Effect of Heat Treatment on Microstructure and Wear Behavior of Laser Clad FeCoCrMoNi High-Entropy Alloy Coatings

Functionally Nb graded inconel 718 alloys fabricated by laser melting deposition: mechanical properties and corrosion behavior

Influence of Heat Treatment on Microstructure and Mechanical Properties of Laser Cladding Coatings

EFFECTS OF HEAT INPUTS ON THE STRUCTURE OF Ni-BASED AMORPHOUS COMPOSITE COATINGS APPLIED WITH LASER CLADDING

Microstructure, Corrosive‐Wear, and Electrochemical Properties of Laser Cladded NiCoCrAlY Coatings by Heat Treatment

Effect of process parameters and niobium carbide addition on microstructure and wear resistance of laser cladding nickel‐based alloy coatings