Abstract:The oxidation behavior of a nickel-based superalloy GH738 was studied by isothermal oxidation tests in still air at different temperatures, with exposure time up to 100 h. Oxidation-kinetic curves were plotted using the mass gain method. The surface and cross-sectional morphologies were observed by scanning electron microscopy (SEM). A composition analysis and an oxidation-product identification were conducted using energy-dispersive X-ray spectroscopy (EDS) and an X-ray diffraction (XRD), respectively. The results showed that GH738 exhibited parabolic oxidation-kinetic curves, with stable parabolic-rate constants at each temperatures. The activation energy of oxide growth was calculated to be 329.6 kJ·mol−1. Cr2O3 (chromia) was the external oxidation product at 800 °C. A TiO2–Cr2O3 double-layer structure was formed at 900 °C. The position of TiO2 changed from the oxide–metal interface to the air–oxide interface by the diffusion of Ti atoms in chromia during the oxidation time at this temperature. Spallation was observed in the Cr0.12Ti0.78O1.74–Cr2O3 multi-layer oxide of at 1000 °C, which increased the oxidation rate. For all the tests, the main internal oxide was always Al2O3. The entire GH738 oxidation process was interpreted by the competitive diffusion of elements (Cr, Ti, Ni, etc.) in metal matrix and chromia, while a schematic diagram of oxidation process was proposed.<h3 class="a-plus-plus">Graphic abstract</h3>

High Temperature Oxidation Behaviours of Ni-20Cr/hBN Self-Lubricating Composites

Friction and Wear Properties of Hot-Pressed NiCr–BaCr2O4 High Temperature Self-Lubricating Composites

Study on the oxidation behaviours and the interactions between friction and oxidation of the Ni-based composites with in-situ carbides reinforcement at 800 °C

High temperature oxidation resistance of hot-pressed h-BN/ZrO 2 composites

High Temperature Oxidation Behavior of the B4c/Bn Composites

Fabrication and High-Temperature Tribological Properties of Self-Lubricating NiCr–BaMoO 4 Composites

Preparation of Machinable B_4C/BN Composites and Their Oxidation Resistances at High Temperature

High Temperature Oxidation Behaviors of BaO/TiO2 Binary Oxide-Enhanced NiAl-Based Composites

Tribological Behavior of H-Bn/al2o3 Self-Lubricating Composites in Extreme Environment-Part II: Self-lubrication and Mechanism in Water-Oxygen Environment from 300 °C to 1200 °C

Oxidation behavior of Ni-based superalloy GH738 in static air between 800 and 1000 °C

HVOF Preparation and Cycle Oxidation Behavior at 600℃of Nanostructured Ni60-TiB2 Composite Coating

HVOF Preparation and Cycle Oxidation Behavior at 600.DEG.C.of Nanostructured Ni60-TiB2 Composite Coating

Mechanical, Tribological and Oxidation Resistance Properties of Ni-based Self-Lubricating Composite Coatings at Elevated Temperature by APS

Preparation, Mechanical Properties and Cyclic Oxidation Behavior of the Nanostructured NiCrCoAlY-TiB2 Coating

High Temperature Oxidation Behavior of the Wrought Ni-based Superalloy GH4037 in the Solid and Semi-Solid State

Oxidation Behavior of AlN/h-BN Nano Composites at High Temperature

Thermal-mechanical driven oxidation of NiCr-Cr3C2-BaF2/CaF2 composite coating at high temperature

Corrosion behaviour of NiCrFeAl-hBN seal coatings in oxidation environments at a high temperature

Cycle Oxidation Behavior of Nanostructured Ni60–TiB2 Composite Coating Sprayed by HVOF Technique

Oxidation behavior of 4774DD1 Ni-based single-crystal superalloy at 980 °C in air

On the high-temperature oxidation behavior of a niobium-bearing high nickel-chromium alloy: microstructural evolution and implications on oxidation mechanisms