Abstract:In this study, ultrasonic surface rolling process (USRP) was used to fabricate a gradient nanostructured commercial pure titanium. The site-specific microstructure, refining mechanisms and mechanical properties were investigated by high-resolution transmission electron microscopy, electron backscatter diffraction and tensile test. The results show that the surface layer exhibited multi-gradient features along the depth, including grain size gradient, deformation twin gradient, strain gradient, orientation gradient and hardness gradient. The gradient structure consisting of equiaxed nanograin layer, elongated lamellar layer, deformation twinning profuse layer, and coarse-grained layer along the depth direction. The formation mechanisms of gradient nanostructure are thoroughly elucidated, and the synergistic effect of twin and dislocation plays an important role in grain refinement. In addition, amorphous bands (generated by localized dislocations or phase transformation triggered crystalline to amorphous transition) and nano-thick lamellar with face-centered cubic (FCC) structure (<0001>HCP//<001>FCC, {1 1 ¯ 00}HCP//{2 2 ¯ 0}FCC and {11 2 ¯ 0}HCP//{220}FCC) were formed in the nanograin layer, and the phase transformation mechanisms were elucidated. The HCP to FCC phase transformation and amorphization play a role in refining grain. Tensile test results suggested that the gradient nanostructure improved the strength (yield strength and ultimate tensile strength improved from 342 MPa and 526 MPa to 412 MPa and 598 MPa, respectively) while maintaining enough plasticity. The strength-plasticity synergy was attributed to the coordinated deformation of the gradient nanostructure and the coarse-grained core.

A Quantified Complex Strengthening Mechanism in Solid-State Recycled Titanium

Analysis of Densification and Consolidation during the Solid-State Recycling of High Purity Titanium Chips

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

Gradient nanostructure, phase transformation, amorphization and enhanced strength-plasticity synergy of pure titanium manufactured by ultrasonic surface rolling

Superior High-Cycle Fatigue Property Through In-Situ Precipitation of Α' Martensite in Additively Repaired Titanium Alloy

Columnar-to-equiaxed transition mechanism and remarkable strengthening effect in additive manufactured pure titanium induced by copper addition

Evolution of microstructure, macrotexture and mechanical properties of high strength biomedical TA4 pure titanium during multi-pass ECAP

The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of (tib+tic) Reinforced Titanium Matrix Composites

α" martensite engineering: A strategy to achieve high yield strength and low yield ratio synergy for dual-phase titanium alloy

Elucidating the Effect of Gradient Structure on Strengthening Mechanisms and Fatigue Behavior of Pure Titanium

Ultrahigh Strength - Ductility in Ti-6Al-4V Composites with High-Activity Graphene-Induced In-Situ TiC and Coherent Nanophases

Strengthening layer with nano-twins in titanium alloy induced by laser surface re-melting: Mechanism of high strength and ductility

Enhanced Strength–Ductility Synergy in Ti55531 Titanium Alloys Through Gradient Microstructural Design Strategy

Relationship of microstructure and properties of high-purity titanium manufactured by unconventional method of chips recycling

Microstructure Evolution and Numerical Modeling of TC4 Titanium Alloy during Ultrasonic Shot Peening Process

Strength and ductility improvement of the axial gradient microstructure TC21 titanium alloys manufactured by electropulsing plus step-quenching treatment

Making Titanium Alloys Ultrahigh Strength and Toughness Synergy Through Deformation Kinks-Mediated Hierarchical Α-Precipitation

Achieving synergy of strength and ductility in powder metallurgy commercially pure titanium by a unique oxygen scavenger

Constitutive Behavior of Titanium Alloy with Dual-Phase Microstructures: Experiments and Modeling

Strengthening Effects of Tic Particles and Microstructure Refinement in in Situ Tic-Reinforced Ti Matrix Composites

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites