Abstract:Copper oxide thin films were grown on (111)-oriented MgO substrates via the DC magnetron sputtering technique. High-purity copper was used as target material. The films were grown in an atmosphere of pure argon at a pressure of 1.27 torr. The substrate temperature was maintained at 400 °C during the growth. After deposition, the films were annealed in-situ in an argon/oxygen atmosphere (80%/20%) at 450 °C for either two or four minutes. It was found that the annealing time was a sensitive process parameter for achieving single- or mixed-phase copper oxide thin films. The single-phase cuprous (Cu2O) oxide films were obtained with the shorter annealing time (two minutes). Longer annealing times led to destabilization of the Cu2O phase, concomitant with the formation of the cupric oxide (CuO) phase in the sample. From optical spectroscopy studies, a band gap value of 2.4 eV was determined for the Cu2O films. This value decreased for the mixed-phase films. Near-infrared spectroscopy spectra were characterized by the presence of troughs and peaks, probably stemming from volume and surface scattering. Furthermore, differences in the intensity of the absorption with the chosen annealing process were observed, which were probably associated with slight variations in the grain size and/or morphology of the films. The electrical behavior of the films was investigated by means of complex impedance spectroscopy and DC transport measurements. Strong dependence of the electrical properties on the frequency and temperature was observed. The impedance spectra were well modeled in terms of equivalent electrical circuits. As a result, it was found that the predominant contribution to the resistance and capacitance of the Cu2O films came from the bulk of the grains. It was also verified that the relaxation of the charge carriers was a thermally active process with an activation energy of ~ 0.17 eV. A semiconducting-like behavior in the 100–320 K temperature range was also verified. The electronic transport mechanism in the Cu2O films was satisfactorily described within the framework of the Mott variable range hopping model. From the fit of this model to the experimental data, values as high as 3.5 × 1018 eV−1 cm−3 and ~ 12 nm were estimated for the density of states at the Fermi level and the hopping distance, respectively.

Fabrication of two domain Cu2O(0 1 1) films on MgO(0 0 1) by pulsed laser deposition

Fabrication Of Two Domain Cu2o(011) Films On Mgo(001) By Pulsed Laser Deposition

Preparation and Characterization of Mg-doped ZnO Thin Films by Sol–gel Method

Growth of Cubic MgxZn1-xO Films and Characterization

Cubic Mgxzn1-Xo Films Grown on Si(111)

Realization of tunable fabrication from Cu nanoparticles film towards Cu 2 O thin film by pulse laser deposition method

High-index Cu2O (113) Film on Faceted MgO (110) by Molecular Beam Epitaxy

Cubic MgxZn1−xO Films Grown on SiO2 Substrates

Characterizations of Cubic ZnMgO Films Grown on Si(111) at Low Substrate Temperature

Epitaxial Electrodeposition of Cu2o Films Onto Inp(001)

Orientation of MgO thin films grown by pulsed laser deposition

On the dielectric properties and conduction mechanism in cuprous oxide thin films grown on (111)-oriented MgO substrates by means of non-reactive DC magnetron sputtering

Fabrication and Properties of Pure-Phase Cu2O Co-Doped with Zinc and Indium

Epitaxial Zn1−Mg O Films Grown on (1 1 1) Si by Pulsed Laser Deposition

Structural and Optical Studies of Mg(X)Zn(1-X)Ofilms Grown on Sapphire

MOCVD growth and properties of ZnO and Zn1-xMgxO films

Structural and Photoluminescence Properties of Zn0.8Mg0.2O Thin Films Grown on Si Substrate by Pulsed Laser Deposition

Magnetic and Structural Properties of Pulsed Laser Deposited CuFe 2 O 4 Films

Fabrication of P-Type ZnMgO Films Via Pulsed Laser Deposition Method by Using Li As Dopant Source

Structural, Electrical And Optical Properties Of Zn1-Xmgxo Films Prepared By Reactive Dc Sputtering

Selective Growth of (100)-, (110)-, and (111)-Oriented MgO Films on Si(100) by Pulsed Laser Deposition