Abstract:In the present paper, the ZrB2/h-BN multiphase ceramics were fabricated by SPS (spark plasma sintering) technology at lower sintering temperature using h-BN, ZrO2, AlN and Si as raw materials and B2O3 as a sintering aid. The phase constitution and microstructure of specimens were analyzed by XRD and SEM. Moreover, the effects of different sintering pressures on the densification, microstructure and mechanical properties of ZrB2/h-BN multiphase ceramics were also systematically investigated. The results show that the ZrB2 was obtained through solid phase reaction at different sintering pressures, and increasing sintering pressure could accelerate the formation of ZrB2 phase. As the sintering pressure increasing, the fracture strength and toughness of the sintered samples had a similar increasing tendency as the relative density. The better comprehensive properties were obtained at given sintering pressure of 50MPa, and the relative density, fracture strength and toughness reached about 93.4%, 321MPa and 3.3MPa·m1/2, respectively. The SEM analysis shows that the h-BN grains were fine and uniform, and the effect of sintering pressure on grain size was inconspicuous. The distribution of grain is random cross array, and the fracture texture was more obvious with the increase of sintering pressure. The fracture mode of sintered samples remained intergranular fracture mechanism as sintering pressure changed, and the grain refinement, grain pullout and crack deflection helped to increase the mechanical properties.

Microstructure and Mechanical Properties of ZrB2–SiC–BN Composites Fabricated by Reactive Hot Pressing and Reactive Spark Plasma Sintering

Microstructural Features and Mechanical Properties of ZrB2–SiC–ZrC Composites Fabricated by Hot Pressing and Reactive Hot Pressing

Reactive hot pressing of ZrB2-SiC composites

Microstructure and mechanical properties of hot pressed ZrC-SiC-ZrB 2 composites

Microstructures and mechanical properties of reactive spark plasma-sintered ZrB2–SiC–MoSi2 composites

Reactive Hot Pressing and Sintering Characterization of ZrB2–SiC–ZrC Composites

Microstructure and Mechanical Properties of ZrB2-SiC Composites

Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Microstructure and properties of ZrB2-SiC-AlN composites

Processing and Properties of ZrB2-Cu Composites Sintered by Hot-Pressing Sintering

Microstructure and Mechanical Properties of Reactive Hot-Pressed BN-ZrB_2-ZrO_2 Composites

Influence of SiCnp Content on the Microstructure and Mechanical Properties of ZrB2–SiC Nanocomposite

Processing and Properties of ZrB<sub>2</sub>-Cu Composites Sintered by Hot-Pressing Sintering

Microstructures and Enhanced Mechanical Properties of (Zr, Ti)(C, N)-Based Nanocomposites Fabricated by Reactive Hot-Pressing at Low Temperature

Effect of BN grain size on microstructure and mechanical properties of the ZrB2–SiC–BN composites

A TEM study of nanostructures and interfaces in the hot-press sintered ZrB2–SiC–Si3N4 composites

Microstructure, Mechanical Properties and Oxidation Behavior of Reactive Hot-Pressed (Zr,Ti)B2-SiC-ZrC Composites

Mechanical Properties of NanoSiC Reinforced ZrB2-Based Ceramic Composite

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

Mechanical Properties of NanoSiC Reinforced ZrB<sub>2</sub>-Based Ceramic Composite