The Influence of Ball Milling Time and Sintering Temperature on the Structural and Capabilities of FeCoCrNiMn High-Entropy Alloy
Yutian Ma,Zhenming Wang,Xingchang Tang,Ganghu Cheng,Yajun Liu,Kexuan Chen,Zhijian Zhang,Sujun Lu,Yuanjun Sun,Junzhao Liu
DOI: https://doi.org/10.1088/1742-6596/2587/1/012005
2023-01-01
Journal of Physics Conference Series
Abstract:Abstract This study reports the fabrication of FeCoCrNiMn high-entropy alloy using high-purity powders of Fe, Co, Cr, Ni, and Mn through the processes of mechanical alloying (MA) and spark plasma sintering (SPS). We systematically investigated the effects of different ball milling times (10 h, 20 h, 30 h, 40 h, 50 h) and sintering temperatures (700°C, 800°C, 900°C, 1000°C, 1100°C) on the structure and capabilities of the alloy. The findings indicate that the atomic proportion of Fe:Co:Cr:Ni:Mn approach 1:1:1:1:1. The distribution of all elements is basically uniform, but the Cr element is slightly biased in the structure after 40 h ball milling. The voids in the structure are gradually decreasing as temperatures rise. The matrix structure is mainly composed of a white FCC matrix phase and a gray Cr-rich σ phase. The alloy structure is the densest. It has the highest density of 7.060 g/cm3, the highest compressive strength of 1480 MPa, and a plastic deformation of 13% when the SPS temperature reaches 1000°C. The FeCoCrNiMn high-entropy alloy is prepared by a ball milling time of 40 h, and spark plasma sintering of 1000°C has the best comprehensive properties.