Abstract:The main chemical component of high-silicon iron tailings (HSITs) is SiO2; HSITs also include some oxides such as Al2O3 and CaO. Mechanical activation can reduce the particle size of HSITs and enhance their pozzolanic activity such that they can be used as a type of mineral admixture for cement-based materials (CBMs). This study aims to investigate the mechanical activation (ultrafine grinding) effects of HSITs, including physical and crystallization structure effects. The particle distribution, specific surface area, density, and solubility of HSITs were tested using laser particle size analysis and other routine physical testing methods. Their crystal structures were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry-thermogravimetry (DSC-TG). Grinding reduced the particle size of HSIT particles and increased their specific surface area, wherein the minimum D50 was 5.75 μm, the maximum specific surface area was 7608 m2/kg, and the corresponding grinding time was 3.5 h. With an increase in grinding time, the solubility showed an increasing trend; however, the density showed a decreasing trend. The change was fast before 3.5 h or 4 h and then slowed down, but the final solubility was still higher than its initial level, while the final density was still lower than its initial level. Grinding reduced the degree of crystallization of the minerals in HSITs and increased the microscopic strain and disorder of its crystal structure. These changes were significant for a grinding time of 0–3.5 h, after which the changes tended to be slow. The symmetry and integrity of the SiO2 structure decreased with grinding. The activity index of the HSIT powder was higher than 0.6. Ultrafine grinding improves the particle size distribution of HSITs and reduces the crystallinity of their main minerals, which in turn increases their chemical reactivity. It can be said that ultra-finely ground HSIT powder is pozzolanic and can be used as a mineral admixture for CBMs, and its grinding limit can be inferred to be 3.5 h.

Mechanochemical Effect of Brucite Powder in A Wet Ultrafine Grinding Process

Wet Grinding of Montmorillonite and Its Effect on the Properties of Mesoporous Montmorillonite

Mechanochemical Effects of ZnO Powder in a Wet Super-Fine Grinding System As Indicated by Instrumental Characterization

Research on the Mechano-chemical Effect of Natural Zeolite During Wet Ultrafine Grinding by Stirred Mill

Mechanochemical Preparation of Ultraf Ine Nano-Scale Powders of ZrO_2 and ZrO_2(MgO)

Study on Preparation and Processing Properties of Mechano-Chemical Micro-Grinding Tools

Hydration of MgO: Reaction Kinetics and pH Control on Brucite Crystal Morphology

Characterization of mechanochemical modification in SiC powder

Fractal characteristics of particle groups and mechanochemical effects of Yellow River sediment after mechanical grinding

Effect of Ball Milling Parameters on Properties of Nano-Sized Tungsten Powder via Mechanochemical Processing

Effect of mechanochemical activation on surface oxidation of steel ball in milling serpentinite

Novel designed mechanical-mechanochemical synergistic micro-grinding technology and compounded abrasive micro-grinding tools

CHARACTERIZATION OF BRUCITE/TiO2 COMPOSITE PARTICLE MATERIAL PREPARED BY MECHANO-CHEMICAL METHOD

CHARACTERIZATION OF BRUCITE/TiO<sub>2</sub> COMPOSITE PARTICLE MATERIAL PREPARED BY MECHANO-CHEMICAL METHOD

On the grinding effects of high-silicon iron tailings

Mechanochemical activation of natural clay minerals: an alternative to produce sustainable cementitious binders – review

Optimization of mechanochemical surface modification parameters on planetary mill using an I -optimal experimental design

Experimental Investigation on the Combined Effects of Mechano-Chemical and Ultrasonic Vibration in Titanium Alloy Grinding

Wet mechanochemical surface modification of calcite employing an integration of conventional design and analytical hierarchy process

Sub-micron MoC powders prepared by high-energy mechanochemistry method

Synthesis of nanocrystalline cubic substoichiometric WC1 − z powders by mechanochemical technology