Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

23% Enhanced Efficiency of Polymer Solar Cells Processed with 1-Chloronaphthalene As the Solvent Additive

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

The Novel Additive 1‐naphthalenethiol Opens a New Processing Route to Efficiency‐Enhanced Polymer Solar Cells

10.8% Efficiency Polymer Solar Cells Based on PTB7‐Th and PC71BM Via Binary Solvent Additives Treatment

Suppressing Non-Radiative Loss Via a Low-Cost Solvent Additive Enables High-Stable All-Polymer Solar Cells with 16.13% Efficiency

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Improving Miscibility of Polymer Donor and Polymer Acceptor by Reducing Chain Entanglement for Realizing 18.64% Efficiency All Polymer Solar Cells

The Influence of Binary Processing Additives on the Performance of Polymer Solar Cells

Enhanced efficiency in nonfullerene organic solar cells by tuning molecular order and domain characteristics

Decreased Domain Size and Improved Crystallinity by Adjusting Solvent–polymer Interaction Parameters in All‐polymer Solar Cells

Efficient Polymer Solar Cells with Open-Circuit Voltage of 1.01 V and Power Conversion Efficiency of 8.09%

Highly Efficient Solar Cells Based on the Copolymer of Benzodithiophene and Thienopyrroledione with Solvent Annealing

Enhanced Performance of P3HT-based Non-Fullerene Polymer Solar Cells by Optimizing Film Morphology Using Non-Halogenated Solvent

Improved Charge Transport and Reduced Nonradiative Energy Loss Enable over 16% Efficiency in Ternary Polymer Solar Cells

17.1 %-Efficient Eco-Compatible Organic Solar Cells From A Dissymmetric 3d Network Acceptor

Improvement of Efficiency of Polymer Solar Cells with Soluble Fullerene Derivatives

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Optimized Domain Size and Enlarged D/A Interface by Tuning Intermolecular Interaction in All-Polymer Ternary Solar Cells

Nonhalogenated‐Solvent‐Processed High‐Performance All‐Polymer Solar Cell with Efficiency over 14%

Improved Morphology and Efficiency of Polymer Solar Cells by Processing Donor–Acceptor Copolymer Additives

Enhancing the Performance of Polymer Solar Cells by Using Donor Polymers Carrying Discretely Distributed Side Chains.