Abstract:A new Mg-2.2 wt% Zn alloy containing 1.8 wt% Ca and 0.5 wt% Mn has been developed and subjected to extrusion under different extrusion parameters. The finest (~ 0.48 μm) recrystallized grain structures, containing both nano-sized MgZn2 precipitates and α-Mn nanoparticles, were obtained in the alloy extruded at 270 °C/0.01 mm s−1. In this alloy, the deformed coarse-grain region possessed a much stronger texture intensity (~ 32.49 mud) relative to the recrystallized fine-grain region (~ 13.99 mud). A positive work hardening rate in the third stage of work hardening curve was also evident in the alloy extruded at 270 °C, which was related to the sharp basal texture and which provided insufficient active slip systems. The high work hardening rate in the fourth stage contributed to the high ductility extruded at 270 °C/1 mm s−1. This alloy exhibited a weak texture, and the examination of fracture surface revealed highly dimpled surfaces. The optimum tensile strength was achieved in the alloy extruded at 270 °C/0.01 mm s−1, and the yield strength, ultimate tensile strength and elongation to failure were ~ 364.1 MPa, ~ 394.5 MPa and ~ 7.2%, respectively. Fine grain strengthening from the recrystallized fine-grain region played the greatest role in the strength increment of this alloy compared with Orowan strengthening and dislocation strengthening in the deformed coarse-grain regions.

Development of a new magnesium alloy ZW21

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior

Microstructure and mechanical properties of Mg–4Al–4Nd–0.5Zn–0.3Mn alloy

Development of New Magnesium Alloy AZ63H

Effects of Grain Size and Heat Treatment on the Tensile Properties of Mg–3Nd–0.2Zn (wt%) Magnesium Alloys

High Cycle Fatigue Behavior and Mechanical Performance of a Novel Sand-Cast Mg-Nd-Gd Alloy: Effect of Heat Treatment

Microstructure And Mechanical Properties Of Mg-12.3zn-5.8y-1.4al Alloy

Microstructure Evolution and Mechanical Properties of High Performance Mg–10Gd–2Y–0·5Zn–0·3Zr Alloy During Heat Treatments

Effects of Heat Treatments on the Microstructures and Mechanical Properties of Mg–3Nd–0.2Zn–0.4Zr (wt.%) Alloy

Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg–Zn–Ca–Mn Magnesium Alloy

Microstructure and Mechanical Properties of Mg–4.5Zn–xNd (x=0, 1 and 2, Wt%) Alloys

Effects of Heat Treatments on Microstructure and Mechanical Properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) Alloy

Effect of Heat Treatment on Microstructures and Mechanical Properties of Sand-Cast Mg–4Y–2Nd–1Gd–0.4Zr Magnesium Alloy

Microstructure, generation of intermetallic compounds and mechanical strengthening mechanism of as-cast Mg–4Y–xZn alloys

Effect of Heat Treatment on Microstructure, Mechanical Properties and Fracture Behaviors of Sand-Cast Mg-4Y-3Nd-1Gd-0.2Zn-0.5Zr Alloy

Effects of Minor Y Addition on Microstructure and Mechanical Properties of Mg-Nd-Zn-Zr Alloy

Study on the Microstructure and Mechanical Property of High Strength Mg-Nd-Zn-Zr Alloy

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States