Abstract:The porous carbon blacks rationally designed by a facile yet efficient NH3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g−1 at 50 mA g−1 and a superior rate capability of 101 mAh g−1 at 16000 mA g−1, due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g−1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g−1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. This system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

Sodium Salt Effect on Hydrothermal Carbonization of Biomass: a Catalyst for Carbon-Based Nanostructured Materials for Lithium-Ion Battery Applications

A Life Cycle Assessment of Hard Carbon Anodes for Sodium-Ion Batteries

Sodium‐Ion Batteries: Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance (adv. Funct. Mater. 24/2019)

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Molten Salt Synthesis of Carbon Anode for High-Performance Sodium-Ion Batteries

Molten-salt treatment of waste biomass for preparation of carbon with enhanced capacitive properties and electrocatalytic activity towards oxygen reduction

Boosting the Initial Coulomb Efficiency of Sisal Fiber-Derived Carbon Anode for Sodium Ion Batteries by Microstructure Controlling

Elucidating Salt Conversion Mechanisms of Lithiated Transition Metal Oxides for Lithium-Ion Battery Recycling

Precise Carbon Structure Control by Salt Template for High Performance Sodium-Ion Storage

Sustainable eutectic mixture strategy of molten salts for preparing biochar with interconnected pore structure from algal residue and its performance in aqueous supercapacitor

Structural design of biomass-derived hard carbon anode materials for superior sodium storage via increasing crystalline cellulose and closing the open pores

Temperature effects on hard carbon derived from sawdust as anode materials for sodium ion batteries

Towards Enhanced Sodium Storage of Hard Carbon Anodes: Regulating the Oxygen Content in Precursor by Low-Temperature Hydrogen Reduction

Molten-Salt-Assisted Synthesis of Hierarchical Porous MnO@Biocarbon Composites as Promising Electrode Materials for Supercapacitors and Lithium-Ion Batteries

The effect of salt anion in ether‐based electrolyte for electrochemical performance of sodium‐ion batteries: A case study of hard carbon

Closed-Loop Utilization of Molten Salts in Layered Material Preparation for Lithium-Ion Batteries

Effects of sodium salts on compatibility between Na2Ti3O7@C anode and electrolyte for sodium-ion batteries

Semi-coke-based amorphous porous carbon synthesized by molten salt assisted method for superior lithium storage

Revealing the effect of conductive carbon materials on the sodium storage performance of sodium iron sulfate