Abstract:Spinel-structured lithium nickel manganese oxide (LiNi0.5M1.5O4, LNMO) is a low-cost battery cathode material with a high operating voltage (similar to 4.7 V vs Li+/Li), relatively high capacity (similar to 147 mA h g(-1)), and good rate performance. Previous studies have suggested that large particle size, single-crystal-like morphology, and high phase purity are favorable for achieving good electrochemical performance. However, simultaneous control over these properties is difficult for conventional solid-state synthesis at high temperatures. Here, we report a molten-salt-assisted method to prepare large-size (median grain size D-50 = 16.8 mu m) single-crystal LNMO with molten lithium molybdate (Li2MoO4) serving as the medium of ion diffusion and crystal growth. In situ X-ray diffraction (XRD) studies of the material preparation process reveal structural disorder and formation of the rock-salt impurity phase at high temperatures, which are reverted upon cooling. The correlations between the cooling rate and structural ordering/phase purity at the single-particle level are further studied using correlative scanning electron microscopy and Raman spectroscopy (SEM-Raman) techniques. SEM-Raman studies for the first time reveal that the Ni-rich rock-salt impurity phase actually exists at the interior of the large-size LNMO particles, which is difficult to be detected by conventional XRD or Raman spectroscopy because of limitations in probing depth. We further confirm that slow cooling is the key to increasing structural ordering and enhancing electrochemical performance of LNMO. The optimized LNMO sample shows excellent cycle performance by retaining similar to 85% initial capacity after 300 charge-discharge cycles and acceptable level of rate capability despite its large particle size. Our results highlight the importance of mechanistic studies into material synthesis, which provide the basis for designing better materials and more efficient preparation methods.

Closed-Loop Utilization of Molten Salts in Layered Material Preparation for Lithium-Ion Batteries

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode from Spent Lithium-Ion Batteries by the Molten Salts Method

Upcycling of spent LiMn 2 O 4 cathode towards sodium-ion battery cathode through molten salt electrolysis approach

A facile eutectic mixed molten salt method for synthesizing LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Elucidating Salt Conversion Mechanisms of Lithiated Transition Metal Oxides for Lithium-Ion Battery Recycling

Enhanced Electrochemical Performance in Lithium Ion Batteries of a Hollow Spherical Lithium-Rich Cathode Material Synthesized by a Molten Salt Method

Hollow spherical 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 prepared by facile molten salt method for enhanced long-cycle and rate capability of lithium-ion batteries

One‐Step Molten‐Salt‐Assisted Approach for Direct Preparation and Regeneration of LiNi0.6Co0.2Mn0.2O2 Cathode

A Molten-Salt Method to Synthesize Ultrahigh-Nickel Single-Crystalline LiNi0.92 Co0.06 Mn0.02 O2 with Superior Electrochemical Performance as Cathode Material for Lithium-Ion Batteries.

Strong Oxidizing Molten Salts for Strengthening Structural Restoration Enabling Direct Regeneration of Spent Layered Cathode

Molten salts synthesis of Li1.1Mn0.55Ni0.3Co0.05O2 oxide cathode material for lithium-ion batteries

Controlling Particle Size and Phase Purity of "Single-Crystal" LiNi0.5Mn1.5O4 in Molten-Salt-Assisted Synthesis

Closed-Loop Direct Upcycling of Spent Ni-Rich Layered Cathodes into High-Voltage Cathode Materials

A Ternary Molten Salt Approach for Direct Regeneration of LiNi0.5 Co0.2 Mn0.3 O2 Cathode.

Effects of Synthesis Conditions of Na0.44MnO2 Precursor on the Electrochemical Performance of Reduced Li2MnO3 Cathode Materials for Lithium-Ion Batteries

Layered lithium-rich oxide nanoparticles: low-temperature synthesis in mixed molten salt and excellent performance as cathode of lithium-ion battery

Molten salts for rechargeable batteries

Preparation of Single-Crystal Li-Rich Mn-Based Layered Oxides with Excellent Electrochemical Performance via Simple Stepwise High-Temperature Sintering

A Ternary Molten Salt Approach for Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode

A Salt‐in‐Metal Anode: Stabilizing the Solid Electrolyte Interphase to Enable Prolonged Battery Cycling