Study on Fenton's reagent oxidation processing of wastewater containing partially hydrolyzed polyacrylamide

Mutai Bao,Yingying Zhou,Jinren Lu

2013-01-01

Abstract:The treatment of simulation wastewater containing partially hydrolyzed polyacrylamide (HPAM) by Fenton's reagent (a mixture of H2O 2 and Fe2+) oxidation processes was carried out in a batch reactor. The effect of operating conditions such as the concentration of H 2O2, the concentration of Fe2+, temperature, reaction time and pH value on the efficiency of Fenton oxidation processes had been optimized. It was demonstrated that Fenton's reagent can effectively oxidate simulation HPAM wastewater. The environmental conditions were optimized to be the concentration of H2O2 5.3 mmol·L -1, the concentration of Fe2+ 1.44 mmol·L -1, temperature of 30 °C, reaction time of 15 min, and the pH value of 3. Under the optimum conditions, the results reflected that the removal rates of HPAM and CODCr could reach up to 87.61% and 82.60%, respectively. The results of the orthogonal experiment showed the influence of parameters followed a decline order of the concentration of H2O2 > the concentration of Fe2+> temperature> pH. The HPAM sample before and after oxidative degradation by Fenton's reagent was analyzed by scanning electronic microscope, the result revealed that the surface of HPAM sample after oxidative degradation by Fenton's reagent changed obviously and showed many cavities, the HPAM sample may break into low polymer or small organic molecules.