Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Physical and Chemical Characterization of Ashes from a Municipal Solid Waste Incinerator in China

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

Chemical Characteristics and Risk Assessment of Typical Municipal Solid Waste Incineration (mswi) Fly Ash in China

Characterization of Fly Ashes from Two Chinese Municipal Solid Waste Incinerators

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Leaching toxicity characteristics of municipal solid waste incineration bottom ash

Distribution Features and Chemical States of Heavy Metals in Municipal Solid Waste Incineration Fly Ash

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Fate Of Heavy Metals During Municipal Solid Waste Incineration In Shanghai

A STUDY ON BASIC CHARACTERISTICS OF FLY ASH FROM MUNICIPAL SOLID WASTE INCINERATOR IN SHENZHEN

Study of Ashes from a Medical Waste Incinerator in China: Physical and Chemical Characteristics on Fly Ash, Ash Deposits and Bottom Ash

Relation Between Leaching Characteristics of Heavy Metals and Physical Properties of Fly Ashes from Typical Municipal Solid Waste Incinerators

ANALYSIS OF BASIC CHARACTERISTICS CONCERNING FLY ASH FROM MSW INCINERATION IN EAST CHINA

Study on Basic Characteristics of Fly Ashes from Municipal Solid Waste Incinerator

Characteristics of Bottom Ash from Municipal Solid Waste Incineration for Resource Utilization

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Engineering Characteristics of Bottom Ash in Municipal Solid Waste Incinerators

Characterization of Solid Residues from Municipal Solid Waste Incinerator

Characteristic and Leaching Behavior of Heavy Metals from Municipal Solid Wastes Incineration (MSWI) Fly Ash in Chongqing, China

Mineralogical Characterization of Municipal Solid Waste Incineration Bottom Ash with an Emphasis on Heavy Metal-Bearing Phases.