Abstract:Bio-slow sand filters (BSSFs) are widely employed in rural drinking water treatment ascribing to its economic applicability, easy operation and high efficiency. This study investigated the influence of particle size, filter thickness, water quality and filtration rate on decontamination performance, bacterial community and metabolic function of BSSFs. The effluent ammonia nitrogen during stable operation period basically met the standards for drinking water quality in China (0.5 mg/L). The average removal efficiencies of fine sand were about 4 % higher than those of coarse sand, and thick filter layer showed more stable performance. Schmutzdecke removed most turbidity and organic pollutants, playing an overwhelming role in water purification. Filtration rate was a key factor in shaping bacterial community structure. Proteobacteria and Cyanobacteria were dominant phyla, whose relative abundance significantly decreased and increased as filtration rate increasing, respectively. Co-occurrence patterns were dominant within bacterial communities. Function bacteria (e.g. Hyphomicrobium and Methylophilus) and rare genera (Curvibacter and Simplicispira) were identified as hub genera in the networks. The bacterial communities exhibited a metabolic versatility. Several pathways for secondary metabolism significantly shifted under different conditions, such as xenobiotics biodegradation and metabolism. Moreover, filtration rate and dominant genera greatly affected pollutant removal performance. Many species of Proteobacteria and Bacteroidota were closely related to carbohydrate metabolism, energy metabolism and nucleotide metabolism, and metabolic functions corresponded more cohesively to conditional abundant taxa, conditional rare or abundant taxa, conditional rare taxa. This study highlights the adaptability and bacterial community characteristics of BSSFs, and provides references for their practical application.

Influence Factors in Air-Lift Sand Filter (ALF) System with Bacteria Activity

Filtration performance of active medium filter

Simulation and test of flow process in air filter

Application of bio-slow sand filters for drinking water production: Linking purification performance to bacterial community and metabolic functions

Influencing Factors on Sand Removal Efficiency in Aerated Grit Chamber

Research on the removal mechanism of pollutants using Biological Aerated Filter

Effects of temperature and pH on nitrification in a seawater biological aerated filter

Performance of A Nitrifying Airlift Reactor Using Granular Sludge

Influence of Air/Water Ratio on Nitrogen Removal by Biological Aerated Filter with Polymer Carrier

Effects of pore diameter and air flow rate on oxygen mass transfer in fine pore aeration

Study on the operation performance and floc adhesion mechanism of dissolved air flotation equipment

Shifting to biology promotes highly efficient iron removal in groundwater filters

Effects of superficial gas velocity on the performance of an air-lift internal circulation partial nitrification-anammox granular sludge reactor

The effect of media bed characteristics and internal auxiliary elements on sand filter head loss

Influencing Factors of Air-to-liquid Ratio in Vacuum Drainage Systems and Determination of Their Values

The Effect of Filtration with Natural Esker Sand on the Removal of Organic Carbon and Suspended Solids from the Effluent of Experimental Recirculating Aquaculture Systems

Simultaneous carbon and nutrient removal in an airlift loop reactor under a limited filamentous bulking state

Insight into the Impact of Air Flow Rate on Algal-Bacterial Granules: Reactor Performance, Hydrodynamics by Computational Fluid Dynamics (CFD) and Microbial Community Analysis

Ammonia removal behavior and biological characteristics of zeolite media in a biological aerated filter

Bacterial capture and inactivation in sand filtration systems with addition of zero-valent iron as permeable layer under both slow and fast filtration conditions

Experimental study on filtration performance of filter tank in circular central sand filter for sand discharging and desilting