Abstract:Publication date: 30 March 2021 Source: Materials Science Forum Vol. 1025 Author(s): Muhammad Syafiq Mohd Shafei, Zulkifly Jemaat Recent advancement on biological wastewater treatment is via granular sludge technology. It is widely known that, aerobic granular sludge has been developed in a batch operation since its discovery. Yet, most of the wastewater treatment plant (WWTP) is operated in continuous mode. Now, the real challenge is how to adopt the granular technology while maintaining present operation mode of WWTP. Thus, this study attempts to evaluate the feasibility of developing aerobic granular sludge in continuous airlift reactors feed with two different substrates, namely glucose and acetate. Two identical airlift reactors (6 L) were employed and operated at room temperature (30°C). Prior to the substrate feeding, both reactors were inoculated with seed sludge obtained from a palm oil mill anaerobic pond. One of the reactors was fed with 2000 mg COD L-1 of glucose (ALR1) and the other reactor with 2000 mg COD L-1 of acetate (ALR2). The hydraulic retention time (HRT) and organic loading rate (OLR) for both reactors were maintained at 4 days and between 0.2 to 0.5 kg m-3day-1 respectively. Dissolved oxygen was maintained between 5.0 and 6.0 mg O2L-1 and supplied by air compressor. The reactor performance was monitored based on COD removal. Aerobic granules developed throughout the study period was evaluated based on granules size and morphology, sludge volumetric index (SVI30) and SVI5/SVI30 ratio analysis. Results showed that ALR1 demonstrated the formation of filamentous-type aerobic granules with most of the SVI30 average at 100 to 190 mL g-1. Ratio SVI5/SVI30 analysis was evaluated at 0.2 and 0.5. The largest granules size obtained during the experiment was about 600 μm on day-136 and average granules size obtained at 200 to 400 μm. ALR1 able to achieve 95% COD removal. For ALR2, round shaped aerobic granules were developed with average SVI30 from 100 to 1000 mLg-1. SVI5/SVI30 analysis indicated an average ratio between 0.7 and 0.9. The average granules size was between 30 to 50 μm and the largest was 78 μm on day-60. 90% of COD removal efficiency was obtained in ALR2. In conclusion, ALR fed with acetate had indicated better aerobic granules characteristics as compared to glucose fed reactor. Furthermore, the study demonstrated that to develop aerobic granules in continuous reactors is feasible.

Simultaneous carbon and nutrient removal in an airlift loop reactor under a limited filamentous bulking state

Simultaneous Ammonia and Nitrate Removal in an Airlift Reactor Using Poly(butylene Succinate) As Carbon Source and Biofilm Carrier.

Characterization of Simultaneous Ammonium and Nitrate Removal and Microbial Communities in Airlift Reactor Using 3-Hydroxybutyrate-co-3-hydroxyvalerate (PHBV) As Carbon Source and Biofilm Carrier.

Performance of A Nitrifying Airlift Reactor Using Granular Sludge

Characteristics of the bioreactor landfill system using an anaerobic-aerobic process for nitrogen removal.

A Pilot Study for Nitrifying Treatment of Wastewater from Fertilizer Production Using a Gas–liquid–solid Three‐phase Flow Airlift Loop Bioreactor

Simultaneous nitrification-denitrification achieved by an innovative internal-loop airlift MBR: comparative study

Simultaneous removal of carbon and nitrate in an airlift bioreactor

Efficient nitrogen removal from municipal wastewater using an integrated fixed-film activated sludge process in a novel air-lifting loop reactor: A pilot-scale demonstration

Hydrodynamic Characteristics of Airlift Nitrifying Reactor Using Carrier-Induced Granular Sludge

The Pilot Study for Oil Refinery Wastewater Treatment Using a Gas–liquid–solid Three-Phase Flow Airlift Loop Bioreactor

Nitrifying treatment of wastewater from fertilizer production in a multiple airlift loop bioreactor

BIO-TREATMENT OF AMMONIA-CONTAINING WASTE WATER FROM CHEMICAL FERTILIZER INDUSTRY WITH A MULTIPLE AIRLIFT LOOP REACTOR

Computer assisted design and flow field analysis of a multi-tube airlift reactor for biological treatment of oily wastewater

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Effect of aeration mode on the performance of center‐ and annulus‐rising internal‐loop airlift bioreactors

Non-uniform dissolved oxygen distribution and high sludge concentration enhance simultaneous nitrification and denitrification in a novel air-lifting reactor for municipal wastewater treatment: A pilot-scale study

Advances in airlift reactors: modified design and optimization of operation conditions

An Attempt to Develop Aerobic Granular Sludge in Continuous Airlift Reactors

Oxygen Transfer Characteristics in a Pilot-Scale Airlift Internal-Loop Bioreactor for Simultaneous Partial Nitrification and Anaerobic Ammonia Oxidation

Efficient Nitrogen Removal using a Continuous-Flow Reactor with Double-Layer Alternating Aeration for Treating Municipal Wastewater