Analysis of vortex characteristics in the S-shaped region of a reversible Pump-Turbine with different guide vane openings based on Omega vortex identification method
Guangtai Shi,Zhengkai Hao,Xiaodong Peng,Haigang Wen,Wenjuan Lv,Jie Fu
DOI: https://doi.org/10.1016/j.est.2024.110921
IF: 9.4
2024-02-23
Journal of Energy Storage
Abstract:As the core equipment of pumped storage power station, the reversible Pump-Turbine can switch different working modes frequently during operation. It is prone to have an S-shaped characteristic region, and it will greatly affect the performance of the energy storage unit. Therefore, in order to explore the reasons for the occurrence of the S-shaped characteristic region, this paper takes the model reversible Pump-Turbine as the research object. Firstly, the unit speed-unit flow characteristics are compared with the model test results at different operating conditions. Then, the vortex distribution in the flow channel of the unit is analyzed based on the Omega vortex identification method, and compared with the Q criterion of the second-generation vortex identification method. By analyzing the internal flow characteristics of the S-shaped characteristic region under different guide vane openings, the internal flow law of the S-shaped characteristic region is revealed. It is found that the vortex distribution is less and more uniform under the condition of the turbine, and the distribution of strong and weak vortex is not obvious. Under the runaway condition, there is a pressure mutation zone at the outlet edge of the guide vane and the inlet edge of the runner, and there is a circulation with large radial velocity. The flow direction and size of the water flow change sharply with the rotation of the blade, and it is easy to form a vortex to hinder the flow of the water flow. Under the braking condition, due to the sudden change of radial velocity, there is an unstable vortex between the guide vane cascades, and it is easy to cause serious blockage between the guide vane cascades. The vortex at the leading edge and trailing edge of the blade is relatively large, and it is most obvious in the middle section of the guide vane and the runner blade. Under the condition of reverse pump, the flow velocity in the runner is relatively small, and there is a serious flow separation phenomenon. A large annular flow is formed in the vaneless zone between the guide vane and the runner. Due to the change of pressure, the unstable vortex almost occupies the whole flow channel, and it is easy to cause the pressure fluctuation of the unit and even the damage of the runner. It is necessary to avoid the long-term operation of the reversible Pump-Turbine in this area. The research results can provide a theoretical basis for improving the performance of pumped storage units.
energy & fuels