Abstract:The spindle tool is an important module of the machine tool. Its dynamic characteristics directly affect the machining performance, but it could also be affected by thermal deformation and bearing preload. However, it is difficult to detect the change in the bearing preload through sensory instruments. Therefore, this study aimed to establish a digital thermal–mechanical model to investigate the thermal-induced effects on the spindle tool system. The technologies involved include the following: Run-in experiments of the milling spindle at different speeds, the establishment of the thermal–mechanical model, identification of the thermal parameters, and prediction of the thermal-induced preload of bearings in the spindle. The speed-dependent thermal parameters were identified from thermal analysis through comparisons with transient temperature history, which were further used to model the thermal effects on the bearing preload and dynamic compliance of the milling spindle under different operating speeds. Current results of thermal–mechanical analysis also indicate that the internal temperature of the bearing can reach 40 °C, and the thermal elongation of the spindle tool is about 27 μm. At the steady state temperature of 15,000 rpm, the bearing preload is reduced by 40%, which yields a decrease in the bearing rigidity by approximately 16%. This, in turn, increases the dynamic compliance of the spindle tool by 22%. Comparisons of the experimental measurements and modeling data show that the variation in bearing preload substantially affects the modal frequency and stiffness of the spindle. These findings demonstrated that the proposed digital spindle model accurately mirrors real spindle characteristics, offering a foundation for monitoring performance changes and refining design, especially in bearing configuration and cooling systems.

Model-Based Design of Motorized Spindles with Different Bearing Configurations

Dynamic modeling and vibration response analysis of high speed motorized spindle

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Investigation of spindle-tool assembly dynamics for optical grinding motorized spindles

Thermal-mechanical dynamic interaction in high-speed motorized spindle considering nonlinear vibration

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Modeling of the motorized spindle temperature field considering the thermos-mechanical coupling on constant pressure preloaded bearings

Thermal effect modeling of axial static stiffness of motorized spindle unit

Influence of Bearing Configuration on Spindle Modal Characteristics

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System

Coupling modeling of thermal–dynamics–milling process for spindle system considering nonlinear characteristics

Thermal characterizations and model of high speed motorized spindle in virtual-reality

Dynamic Model and Dynamic Characteristics of a 3-DOF Spindle with a Parallel Linkage Mechanism

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Development of a Digital Model for Predicting the Variation in Bearing Preload and Dynamic Characteristics of a Milling Spindle under Thermal Effects

Modelling and testing of the dynamic support stiffness of assembled bearings in motorized spindles

Nonlinear dynamic analysis of CNC lathe spindle-bearing system considering thermal effect