Abstract:Porous NiAl intermetallic compounds demonstrate great potential in various applications by their high porosity and excellent oxidation resistance. However, to obtain a controllable NiAl intermetallic structure by tuning different process parameters remains unclear. In this work, porous NiAl intermetallic compounds were fabricated by economic and energy-saving thermal explosion (TE) reaction. The relationship between microstructure and process parameters was revealed using three-dimensional X-ray microscopy (3D-XRM) with high resolution and non-destructive characteristics. The geometrical features and quantitative statistics of the porous NiAl obtained at different heating rates (2, 10, 20 °C min−1) were compared. The result of the closed porosity calculation showed that a lower heating rate (2 °C min−1) promoted the Kirkendall reaction between Ni and Al, resulting in a high closed porosity (5.25%). However, at a higher heating rate (20 °C min−1), a homogeneous NiAl phase was observed using the threshold segmentation method, indicating uniform and complete TE reaction can be achieved at a high heating rate. The result of the 3D fluid simulation showed that the sample heated at 10 °C min−1 had the highest permeability (2434.6 md). In this study, we systematically investigated the relationship between the heating rates and properties of the porous NiAl intermetallic, including the phase composition, porosity, exothermic mechanism, oxidation resistance, and compression resistance. Our work provides constructive directions for designing and tailoring the performance of porous NiAl intermetallic compounds.

Preparation and Pore Structure Stability at High Temperature of Porous Fe-Al Intermetallics

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Performance assessments of porous FeCoNiCrAlx high-entropy alloys in high-temperature oxidation, carbonization and sulfidation atmospheres

The effect of Fe in the rapid thermal explosion synthesis and the high-temperature corrosion behavior of porous Co-Al-Fe intermetallic

Structure-involved Critical Alloy Design Strategy for Enhancing Antioxidation Performance of Porous Fe-Cr-Al Materials

3D Microstructure and anti-oxidation behavior of porous CoAl intermetallic fabricated by rapid thermal explosion

Effect of the heating rate on the thermal explosion behavior and oxidation resistance of 3D-structure porous NiAl intermetallic

Effect of Al content on the microstructure and mechanical properties of the sintered Fe–Mn–Al porous steel

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

High temperature anti-oxidation and filtration behavior of micro/nano-scale porous CoAl intermetallic synthesized via rapid thermal explosion

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Porous TiFe2 intermetallic compound fabricated via elemental powder reactive synthesis

Oxidation Behaviour of Feal Intermetallic Coatings Produced by Magnetron Sputter Deposition

Preparation of FeAl (B2) intermetallic powder by ball milling and heat treatment

Self-exothermic Reaction Behavior and Pore Structures of Ni-Al Intermetallics with More than 70% Porosity

Research advances in preparation and properties of FeAl(B_2) intermetallics

Preparation of Controllable Porous Ti–Al Materials with Zn Space Holders

Thermal stability of microstructures and mechanical properties in a Fe-based Fe-Cr-Mn-Cu-Mo multi-component alloy

Reaction mechanism and oxidation resistance at 700–900 °C of high porosity NiAl intermetallic

Design of a Thermally Stable Heat-Resistant (Al2O3+Al3Ti)/Al Composite with Excellent High-Temperature Mechanical Properties: Multimechanism Synergistic Strengthening Strategy

Pore formation mechanism and oxidation resistance of porous CoAl3 intermetallic prepared by rapid thermal explosion