Abstract:The CoCrFeNiAl high-entropy alloy, with varying Al compositions, was utilized as the bonding phase in this study to fabricate WC-10%CoCrFeNiAl x (where x represents the mole ratio of Al element, ranging from 0 to 1) hard alloys using the Spark Plasma Sintering method. The investigation focused on elucidating the influence mechanism of microstructure and properties of CoCrFeNiAl x high-entropy alloys on the mechanical properties of WC-10%CoCrFeNiAl x hard alloys. Isothermal oxidation testing was subsequently conducted to examine the impact of Al content on the high-temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloys. Finally, a comparison was made between the mechanical properties and high temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloys and conventional WC-6Co cemented carbide. The findings suggest that as the Al content increases, the CoCrFeNiAl x high-entropy alloy undergoes a transition from a single Face-Centered Cubic (FCC) phase to a combination of FCC and Body Centered Cubic (BCC) phases, ultimately transforming into a BCC phase. This evolution results in a gradual enhancement in hardness. The mechanical properties of WC-10CoCrFeNi hard alloy exhibit exceptional characteristics when the Al content is eliminated, with hardness, fracture toughness, and bending strength reaching 1702 MPa, 13.0 MPa·m 1/2 , and 1378 MPa respectively. As the Al content increases in WC-10%CoCrFeNiAl x hard alloys, there is a corresponding increase in hardness while fracture toughness and bending strength gradually decrease. Furthermore, an enhancement in high temperature oxidation resistance is observed. Finally, in comparison to the conventional WC-6Co hard alloy, the mechanical properties of WC-10CoCrFeNiAl x hard alloys exhibit similarity while demonstrating a significant enhancement in oxidation resistance.

The effect of Fe in the rapid thermal explosion synthesis and the high-temperature corrosion behavior of porous Co-Al-Fe intermetallic

3D Microstructure and anti-oxidation behavior of porous CoAl intermetallic fabricated by rapid thermal explosion

Fabrication and Characterization of Highly Porous FeAl-Based Intermetallics by Thermal Explosion Reaction

High temperature anti-oxidation and filtration behavior of micro/nano-scale porous CoAl intermetallic synthesized via rapid thermal explosion

Fabrication of Porous FeAl-based Intermetallics Via Thermal Explosion

Effect of Cr content on the high temperature oxidation behavior of FeCoNiMnCr x porous high-entropy alloys

Effect of Cr Content on the High Temperature Oxidation Behavior of FeCoNiMnCrx Porous High-Entropy Alloys

Pore formation mechanism and oxidation resistance of porous CoAl3 intermetallic prepared by rapid thermal explosion

Performance assessments of porous FeCoNiCrAlx high-entropy alloys in high-temperature oxidation, carbonization and sulfidation atmospheres

Highly Porous Co-Al Intermetallic Created by Thermal Explosion Using NaCl as a Space Retainer

Effect of the heating rate on the thermal explosion behavior and oxidation resistance of 3D-structure porous NiAl intermetallic

A Novel Fabrication Strategy for Highly Porous FeAl/Al2O3 Composite by Thermal Explosion in Vacuum

Effect of Al content on the microstructure and mechanical properties of the sintered Fe–Mn–Al porous steel

Effect of oxygen concentrations on the corrosion behavior of a duplex-phase FeNiCrCuAl high entropy alloy in supercritical water

Structure-involved Critical Alloy Design Strategy for Enhancing Antioxidation Performance of Porous Fe-Cr-Al Materials

Oxidation Behaviour of Feal Intermetallic Coatings Produced by Magnetron Sputter Deposition

The Corrosion Behavior of Al/Al2O3 Composite Films with Ultra-Dense Structure Exposed to Lead-Bismuth Eutectic at 450 to 650 °C

Effect of Al content in CoCrFeNiAl x HEA on mechanical properties and high temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloy

Study on Microstructure and Corrosion Resistance of FeCoCrNiMo/Al-10Si Composites Prepared by Laser Deposition

Effect of Co Content on the Microstructure and Corrosion Behavior of Al0.3CoxCrFeNi High Entropy Alloys

Preparation of Fe2AlB2 Material Via Thermal Explosion Induced by Spark Plasma Sintering