Abstract:The force sensor is key to the performance of atomic force microscopy (AFM). Nowadays, most AFMs use micro-machined force sensors made from silicon, but piezoelectric quartz sensors are applied at an increasing rate, mainly in vacuum. These self sensing force sensors allow a relatively easy upgrade of a scanning tunneling microscope to a combined scanning tunneling/atomic force microscope. Two fundamentally different types of quartz sensors have achieved atomic resolution: the 'needle sensor' that is based on a length extensional resonator and the 'qPlus sensor' that is based on a tuning fork. Here, we calculate and measure the noise characteristics of these sensors. We find four noise sources: deflection detector noise, thermal noise, oscillator noise and thermal drift noise. We calculate the effect of these noise sources as a factor of sensor stiffness, bandwidth and oscillation amplitude. We find that for self sensing quartz sensors, the deflection detector noise is independent of sensor stiffness, while the remaining three noise sources increase strongly with sensor stiffness. Deflection detector noise increases with bandwidth to the power of 1.5, while thermal noise and oscillator noise are proportional to the square root of the bandwidth. Thermal drift noise, however, is inversely proportional to bandwidth. The first three noise sources are inversely proportional to amplitude while thermal drift noise is independent of the amplitude. Thus, we show that the earlier finding that quoted optimal signal-to-noise ratio for oscillation amplitudes similar to the range of the forces is still correct when considering all four frequency noise contributions. Finally, we suggest how the signal-to-noise ratio of the sensors can be further improved and briefly discuss the challenges of mounting tips.

Study on the Nature Frequency of Optical Excitation Quartz Tuning Fork Sensor

High Quality-Factor Quartz Tuning Fork Glass Probe Used In Tapping Mode Atomic Force Microscopy For Surface Profile Measurement

A New Type of MEMS Accelerometer with Up-Tuning Structure

Sensing Performance Analysis on Quartz Tuning Fork-Probe at the High Order Vibration Mode for Multi-Frequency Scanning Probe Microscopy.

Finite Element Method Design and Fabrication of Thermo-sensitive Quartz Tuning Fork Resonators as Temperature Sensor

Equivalent Electromechanical Model for Quartz Tuning Fork Used in Atomic Force Microscopy

Analysis of the natural frequency of a quartz double-end tuning fork with a new deformation model

First Overtone Frequency Stimulated Quartz Tuning Fork Used For Shear-Force Scanning Near-Field Optical Microscopy

Research On The Sensing Performance Of The Tuning Fork-Probe As A Micro Interaction Sensor

Integrated tuning fork nanocavity optomechanical transducers with high $f_{M}Q_{M}$ product and stress-engineered frequency tuning

Force-frequency Relation and Its Nonlinearity of Double-Ended Tuning Fork

Electrical Adjustment on a MEMS Double-Ended-tuning-fork Resonator

A comparsion of force sensors for atomic force microscopy based on quartz tuning forks and length extensional resonators

Study For The Quartz Resonator Force Sensor With Energy Trapping Theory

A Novel Mechanical Frequency Tuning Method Based on Mass-Stiffness Decoupling for MEMS Gyroscopes

Frequency Interferences of Two-Unit Quartz Resonator Arrays Excited by Lateral Electric Fields

Calibration of the oscillation amplitude of quartz tuning fork-based force sensors with astigmatic displacement microscopy

The Recent Progress of MEMS/NEMS Resonators

Modal Analysis of Practical Quartz Resonators Using Finite Element Method

Research on the Resonant Frequency of MEMS Gyroscopes under Varying Tuning Voltage.

Research on Force-Frequency Coefficient of Square Quartz Crystal with Encapsulation body