Abstract:Due to the excellent material properties of crystal quartz and its simple and effective structure, the quartz double ended tuning fork (DETF) is widely used as a resonance sensing element in resonator sensors, where its quality factor has an important effect on the overall accuracy and stability of such sensors. To optimise the quality factor of quartz DETF, the influence of structural dimensions on structural and air damping is analysed, and the theoretical model used to calculate the quality factor is summarised. Further, under the premise of fabricating resonators with sufficient force–frequency sensitivity, the quality factors of quartz DETFs of different structural dimensions are simulated through finite element simulation. The theoretical model and simulation calculation of the quality factor of quartz DETFs mutually verify its effectiveness. Moreover, an experimental platform was built, and three quartz DETFs with different dimensions were fabricated to test their quality factor. The quality factors of the three DETFs in air and vacuum are 3467.3, 1925.8, 4442.4 and 32 997.6, 11 559.1, 24 795.7, respectively, which means that the environmental factors and their structural dimensions have a great influence on quality factor. With the simulation method and summarised theoretical model in this paper, the quality factor was studied with comprehensive structural damping (thermal damping loss and support loss) and air damping (resistance damping, slide film damping, and squeeze film damping). The influence of the structure size on the quality factor was analysed in detail, including the length of the decoupling region, the distance between the tines, and the length and width of the tines, and the main influencing factors were obtained, providing a basic and comprehensive reference for designing quartz DETF.

Force-frequency Relation and Its Nonlinearity of Double-Ended Tuning Fork

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Analysis on the Force?frequency Coefficient and Thermal Elastic Quality Factor for Quartz Double Ended Tuning Fork

Design and Fabrication of Quartz Micro-Electro-Mechanical System-Based Double-Ended Tuning Fork with Variable Sections

A Novel Double-ended Tuning Fork Quartz Accelerometer

Effect of nonlinearity and axial force on frequency drift of a T-shaped tuning fork micro-resonator

A Resonant Sensor Composed of Quartz Double Ended Tuning Fork and Silicon Substrate for Digital Acceleration Measurement

Analysis of the natural frequency of a quartz double-end tuning fork with a new deformation model

Double Tuning-Fork Resonant Accelerometer

Calibrating Conservative and Dissipative Response of Electrically-Driven Quartz Tuning Forks

Comparison of Two Resonant Structures in Silicon Oscillating Accelerometers

Dynamics of Quartz Tuning Fork Force Sensors Used in Standoff Photoacoustic Detection

Design, fabrication, and characterization of a high-sensitivity integrated quartz vibrating beam accelerometer

A Probe-Type High-Precision Micro-Force Sensor Based on Quartz DETF Resonator

Characterization of strongly coupled quartz tuning fork sensors for precision force measurement in atomic force microscopy

Equivalent Electromechanical Model for Quartz Tuning Fork Used in Atomic Force Microscopy

A comparsion of force sensors for atomic force microscopy based on quartz tuning forks and length extensional resonators

Sensing Performance Analysis on Quartz Tuning Fork-Probe at the High Order Vibration Mode for Multi-Frequency Scanning Probe Microscopy.

The Quality Factor of Quartz DETF for Resonant Sensors: Simulation, Analysis and Verification

Vibration Modes Interference in the MEMS Resonant Pressure Sensor

Study on the Nature Frequency of Optical Excitation Quartz Tuning Fork Sensor