Abstract:Diesel particulate filters (DPFs) are well assessed aftertreatment devices, equipping almost every modern diesel engine on the market to comply with today’s stringent emission standards. However, an accurate estimation of soot loading, which is instrumental to ensuring optimal performance of the whole engine-after-treatment assembly, is still a major challenge. In fact, several highly coupled physical-chemical phenomena occur at the same time, and a vast number of engine and exhaust dependent parameters make this task even more daunting. This challenge may be solved with models characterized by different degrees of detail (0-D to 3-D) depending on the specific application. However, the use of real-time, but accurate enough models, may be the primary hurdle that has to be overcome when confronted with advanced exhaust emissions control challenges, such as the integration of the DPF with the engine or other critical aftertreatment components (selective catalytic reduction or other NOx control components), or to properly develop model-based OBD sensors. This paper aims at addressing real time DPF modeling issues with special regard to key parameter settings, by using the 1-D code called ExhAUST (exhaust aftertreatment unified simulation tool), which was jointly developed by the University of Rome Tor Vergata and West Virginia University. ExhAUST is characterized by a novel and unique full analytical treatment of the wall that allows a highly detailed representation of the soot loading evolution inside the DPF porous matrix. Numerical results are compared with experimental data gathered at West Virginia University engine laboratory using a MY2004 Mack®MP7-355E, an 11 liter, 6-cylinder, inline heavy-duty diesel engine coupled to a Johnson Matthey CCRT diesel oxidation catalyst + CDPF, catalyzed DPF exhaust aftertreatment system. To that aim, the engine test bench was equipped with a DPF weighing system to track soot loading over a specifically developed engine operating procedure. Results indicate that the model is accurate enough to capture soot loading and back pressure histories with regard to different steady state engine operating points, without a need for any tuning procedure of the key parameters. Thus, the use of ExhAUST for application to advanced after-treatment control appears to be a promising tool at this stage.

DPF Regeneration System Modeling and Control Strategy Design with Simulink and AVL Boost

Simulation and Optimization of Mathematical Model Based DPF Regeneration Control Strategy

A Study on the Compound Regeneration Control Strategy for DPF Using Burner and DOC

Realtime Simulation Model of Exhaust Aftertreatment System for Common Rail Diesel Engine

Multi-channel Simulation of the Regeneration of Diesel Particulate Filters

Study on Characteristics and Control Strategy of Diesel Particulate Filters Based on Engine Bench

Study on Diesel Engine Coolant Temperature Control Strategy with Feedforward

Study on Egr Control Strategy for Vehicle Diesel Engine Based on Experiment

Simulation Analysis of the Direct Injection Engine Performance and Experimental Research

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Soot Modeling for Advanced Control of Diesel Engine Aftertreatment

Study on Burner Type Diesel Particulate Filter System Using Compressed Air from Turbocharger

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Methodology of diesel particulate filter testing on test bed for non-road engine application

Multiobjective Optimization of Diesel Particulate Filter Regeneration Conditions Based on Machine Learning Combined with Intelligent Algorithms

Influence of Incoming Flow Conditions on DPF Thermal Regeneration

Full course evolution characteristics of DPF active regeneration under different inlet HC concentrations

Design and optimization of exhaust gas aftertreatment system for a heavy-duty diesel engine

Numerical model and control strategies for the advanced thermal management system of diesel engine

Influence of Revised Kinetics Model on DPF's Thermal Regeneration

Research on Dynamic Modeling and Carbon Load Estimation of Diesel Particulate Filter