Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Effects of Nanometer-Tio2 Surface Modification and Concentration on the Mechanical Performances of Polypropylene/polyamide Maleic Anhydride-Grafted Polypropylene Composite

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Compatibilizing Effect of Maleated Polypropylene on the Mechanical Properties of Injection Molded Polypropylene/polyamide 6/Functionalized-Tio2 Nanocomposites

Preparation of PP/nano-TiO2 composites by reactive compatibilization

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Compatibilization of Nanometer-Sized TiO_2 on Polypropylene/Polyamide 6 Blends

Synthesis and Application Effect of Hyper-Dispersants for Modification of Inorganic Nano-Powders

The Effect of Functionalized-TiO2 on the Mechanical Properties of PP/PA6/Functionalized-TiO2 Nanocomposites Prepared by Reactive Compatibilization Technology

Synthesis and Characterization of Polypropylene-Grafted-Poly(Methyl Methylacrylate) Copolymers

Effects of halloysite nanotubes modified by organic phosphate on the performance improvement for polypropylene

Synthesis and Characterization of Polybutadiene-grafted-Poly(Butyl Methylacrylate) Copolymers

Dispersion, thermal and mechanical properties of polypropylene/magnesium hydroxide nanocomposites compatibilized by SEBS-g-MA

Influences of Dicumyl Peroxide on Morphology and Mechanical Properties of Polypropylene/poly(styrene‐b‐butadiene‐b‐styrene) Blends Via Vane‐extruder

Study on the Compatibility of Pa6/Lldpe/Nano-Sized Copolymer Microspheres Composites

Enrichment of Poly(Butyl Methacrylate) and Its Graft Copolymer of Polybutadiene on the Surface of Polypropylene Blend

Pan-Milling Preparation of Polypropylene- graft -Maleic Anhydride and Its Compatibilizing Effect on Polyamide 6/Polypropylene Blend

ENHANCED MECHANICAL PROPERTIES OF POLYPROPYLENE/SILICA NANOCOMPOSITES WITH SURFACE MODIFICATION OF NANO-SILICA VIA IN SITU COPOLYMERIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

FUNCTIONALIZATION OF POLYPROPYLENE AND COMPATIBILIZATION OF POLYPROPYLENE/NYLON 6 BLENDS WITH Α-Methyl STYRENE/STYRENE/MALEIC ANHYDRIDE TERNARY COPOLYMER

A New Method Combining Modification of Montmorillonite and Crystal Regulation to Enhance the Mechanical Properties of Polypropylene