Abstract:This paper presents a generic-purpose solution of highly power-efficient active-RC filters, which is suitable for analog baseband with wide bandwidth-range from several mega-Hz to hundreds of mega-Hz in wireless receivers. A 260 μA 7-20 MHz 6th-order active-RC low-bandwidth low-pass filter (LBW-LPF) and a 2.3 mA 240-500 MHz 6th-order active-RC high-bandwidth low-pass filter (HBW-LPF) are implemented in a standard 0.18 μm CMOS process to demonstrate this versatile solution. Highly power-efficient push-pull opamps with 30-to-35 dB gain are adopted for the filters, which allow us to focus on extending the bandwidth and reducing the power consumption. The push-pull opamp with adaptive-biased and pole-cancellation push-pull source follower (APP-SF) as the buffer stage is proposed to greatly reduce the power consumption and effectively extend the bandwidth. An adaptive bias mechanism is also proposed to tolerate the PVT variations for the opamps. In addition, the GBW compensation and the Q-degrading scheme are adopted to relax the opamp GBW requirement, further reducing the power dissipation. The LBW-LPF only consumes 260 μA current from 1.8 V supply, achieves 14.4 dBm in-band IIP3 and 66.2 nV/√ Hz IRN density, and occupies 0.21 mm 2 silicon area without pads. The HBW-LPF merely dissipates 2.3 mA current from 1.8 V supply, achieves 11.3 dBm in-band IIP3 and 13.1 nV/√ Hz IRN density, and occupies 0.23 mm 2 silicon area without pads.

A single-branch third-order pole-zero low-pass filter with 0.014-mm 2 die size and 0.8-kHz (1.25-nW) to 0.94-GHz (3.99-mW) bandwidth-power scalability

0.013 mm2, kHz-to-GHz-bandwidth, thirdorder all-pole lowpass filter with 0.52-to- 1.11 pW/pole/Hz efficiency

A 5th order 0.8/2.4 GHz programmable active band pass filter for power DAC applications

A Fifth-Order 20-Mhz Transistorized-Lc-Ladder Lpf With 58.2-Db Sfdr, 68-Mu W/Pole/Mhz Efficiency, And 0.13-Mm(2) Die Size In 90-Nm Cmos

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A Fifth-Order 20-MHz Transistorized- $LC$ -Ladder LPF With 58.2-dB SFDR, 68- $\mu\hbox{W/Pole/MHz}$ Efficiency, and 0.13- $\hbox{mm}^{2}$ Die Size in 90-nm CMOS

0.07mm 2, 2mW, 75MHz-IF, fourth-order BPF using source-follower-based resonator in 90nm CMOS

A 2.3mA 240-to-500MHz 6th-order active-RC low-pass filter for ultra-wideband transceiver

A Highly Linear 0.9V 3Rd-Order Acitve-RC Low-Pass Filter in CMOS 28Nm

A 77-dB-DR 0.65-mW 20-MHz 5th-Order Coupled Source Followers Based Low-Pass Filter

A 0.65mw 20mhz 5Th-Order Low-Pass Filter With+28.8dbm Iip3 Using Source Follower Coupling

A 0.47mw 6(Th)-Order 20mhz Active Filter Using Highly Power-Efficient Opamp

Highly Power-Efficient Active-RC Filters with Wide Bandwidth-Range Using Low-Gain Push-Pull Opamps

A High Linearity Active-Rc Bpf With 70mhz Center Frequency And 22mhz Bandwidth In 65nm Cmos

A 0.6mw 31mhz 4Th-Order Low-Pass Filter with +29dbm IIP3 Using Self-Coupled Source Follower Based Biquads in 0.18µm CMOS

Scalable, Low-power and High-performance Active-RC Complex Band-Pass/Low-Pass Filter with Automatic Frequency Tuning Applied to the Internet of Things

Design of Gain and Bandwidth Configurable Elliptic Low-pass Filter

Compact, Multilayer 5G Filter Based on Extracted-Pole Shielded Lumped Resonators

High-Selectivity Wideband Bandpass Filter Using Simple Coupled Lines with Multiple Transmission Poles and Zeros